AlkantarClanX12
Your IP : 18.118.32.7
/****************************************************************************
**
** Copyright (C) 2016 The Qt Company Ltd.
** Contact: https://www.qt.io/licensing/
**
** This file is part of the test suite of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 3 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL3 included in the
** packaging of this file. Please review the following information to
** ensure the GNU Lesser General Public License version 3 requirements
** will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 2.0 or (at your option) the GNU General
** Public license version 3 or any later version approved by the KDE Free
** Qt Foundation. The licenses are as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
** included in the packaging of this file. Please review the following
** information to ensure the GNU General Public License requirements will
** be met: https://www.gnu.org/licenses/gpl-2.0.html and
** https://www.gnu.org/licenses/gpl-3.0.html.
**
** $QT_END_LICENSE$
**
****************************************************************************/
import QtQuick 2.0
import QtQuick.Window 2.0 // used for qtest_verifyItem
import QtTest 1.2
import "testlogger.js" as TestLogger
import Qt.test.qtestroot 1.0
/*!
\qmltype TestCase
\inqmlmodule QtTest
\brief Represents a unit test case.
\since 4.8
\ingroup qtquicktest
\section1 Introduction to QML Test Cases
Test cases are written as JavaScript functions within a TestCase
type:
\code
import QtQuick 2.0
import QtTest 1.2
TestCase {
name: "MathTests"
function test_math() {
compare(2 + 2, 4, "2 + 2 = 4")
}
function test_fail() {
compare(2 + 2, 5, "2 + 2 = 5")
}
}
\endcode
Functions whose names start with "test_" are treated as test cases
to be executed. The \l name property is used to prefix the functions
in the output:
\code
********* Start testing of MathTests *********
Config: Using QTest library 4.7.2, Qt 4.7.2
PASS : MathTests::initTestCase()
FAIL! : MathTests::test_fail() 2 + 2 = 5
Actual (): 4
Expected (): 5
Loc: [/home/.../tst_math.qml(12)]
PASS : MathTests::test_math()
PASS : MathTests::cleanupTestCase()
Totals: 3 passed, 1 failed, 0 skipped
********* Finished testing of MathTests *********
\endcode
Because of the way JavaScript properties work, the order in which the
test functions are found is unpredictable. To assist with predictability,
the test framework will sort the functions on ascending order of name.
This can help when there are two tests that must be run in order.
Multiple TestCase types can be supplied. The test program will exit
once they have all completed. If a test case doesn't need to run
(because a precondition has failed), then \l optional can be set to true.
\section1 Data-driven Tests
Table data can be provided to a test using a function name that ends
with "_data". Alternatively, the \c init_data() function can be used
to provide default test data for all test functions in a TestCase type:
\code
import QtQuick 2.0
import QtTest 1.2
TestCase {
name: "DataTests"
function init_data() {
return [
{tag:"init_data_1", a:1, b:2, answer: 3},
{tag:"init_data_2", a:2, b:4, answer: 6}
];
}
function test_table_data() {
return [
{tag: "2 + 2 = 4", a: 2, b: 2, answer: 4 },
{tag: "2 + 6 = 8", a: 2, b: 6, answer: 8 },
]
}
function test_table(data) {
//data comes from test_table_data
compare(data.a + data.b, data.answer)
}
function test__default_table(data) {
//data comes from init_data
compare(data.a + data.b, data.answer)
}
}
\endcode
The test framework will iterate over all of the rows in the table
and pass each row to the test function. As shown, the columns can be
extracted for use in the test. The \c tag column is special - it is
printed by the test framework when a row fails, to help the reader
identify which case failed amongst a set of otherwise passing tests.
\section1 Benchmarks
Functions whose names start with "benchmark_" will be run multiple
times with the Qt benchmark framework, with an average timing value
reported for the runs. This is equivalent to using the \c{QBENCHMARK}
macro in the C++ version of QTestLib.
\code
TestCase {
id: top
name: "CreateBenchmark"
function benchmark_create_component() {
var component = Qt.createComponent("item.qml")
var obj = component.createObject(top)
obj.destroy()
component.destroy()
}
}
RESULT : CreateBenchmark::benchmark_create_component:
0.23 msecs per iteration (total: 60, iterations: 256)
PASS : CreateBenchmark::benchmark_create_component()
\endcode
To get the effect of the \c{QBENCHMARK_ONCE} macro, prefix the test
function name with "benchmark_once_".
\section1 Simulating Keyboard and Mouse Events
The keyPress(), keyRelease(), and keyClick() methods can be used
to simulate keyboard events within unit tests. The events are
delivered to the currently focused QML item. You can pass either
a Qt.Key enum value or a latin1 char (string of length one)
\code
Rectangle {
width: 50; height: 50
focus: true
TestCase {
name: "KeyClick"
when: windowShown
function test_key_click() {
keyClick(Qt.Key_Left)
keyClick("a")
...
}
}
}
\endcode
The mousePress(), mouseRelease(), mouseClick(), mouseDoubleClickSequence()
and mouseMove() methods can be used to simulate mouse events in a
similar fashion.
\b{Note:} keyboard and mouse events can only be delivered once the
main window has been shown. Attempts to deliver events before then
will fail. Use the \l when and windowShown properties to track
when the main window has been shown.
\section1 Managing Dynamically Created Test Objects
A typical pattern with QML tests is to
\l {Dynamic QML Object Creation from JavaScript}{dynamically create}
an item and then destroy it at the end of the test function:
\code
TestCase {
id: testCase
name: "MyTest"
when: windowShown
function test_click() {
var item = Qt.createQmlObject("import QtQuick 2.0; Item {}", testCase);
verify(item);
// Test item...
item.destroy();
}
}
\endcode
The problem with this pattern is that any failures in the test function
will cause the call to \c item.destroy() to be skipped, leaving the item
hanging around in the scene until the test case has finished. This can
result in interference with future tests; for example, by blocking input
events or producing unrelated debug output that makes it difficult to
follow the code's execution.
By calling \l createTemporaryQmlObject() instead, the object is guaranteed
to be destroyed at the end of the test function:
\code
TestCase {
id: testCase
name: "MyTest"
when: windowShown
function test_click() {
var item = createTemporaryQmlObject("import QtQuick 2.0; Item {}", testCase);
verify(item);
// Test item...
// Don't need to worry about destroying "item" here.
}
}
\endcode
For objects that are created via the \l {Component::}{createObject()} function
of \l Component, the \l createTemporaryObject() function can be used.
\sa {QtTest::SignalSpy}{SignalSpy}, {Qt Quick Test}
*/
Item {
id: testCase
visible: false
TestUtil {
id:util
}
/*!
\qmlproperty string TestCase::name
This property defines the name of the test case for result reporting.
The default value is an empty string.
\code
TestCase {
name: "ButtonTests"
...
}
\endcode
*/
property string name
/*!
\qmlproperty bool TestCase::when
This property should be set to true when the application wants
the test cases to run. The default value is true. In the following
example, a test is run when the user presses the mouse button:
\code
Rectangle {
id: foo
width: 640; height: 480
color: "cyan"
MouseArea {
id: area
anchors.fill: parent
}
property bool bar: true
TestCase {
name: "ItemTests"
when: area.pressed
id: test1
function test_bar() {
verify(bar)
}
}
}
\endcode
The test application will exit once all \l TestCase types
have been triggered and have run. The \l optional property can
be used to exclude a \l TestCase type.
\sa optional, completed
*/
property bool when: true
/*!
\qmlproperty bool TestCase::completed
This property will be set to true once the test case has completed
execution. Test cases are only executed once. The initial value
is false.
\sa running, when
*/
property bool completed: false
/*!
\qmlproperty bool TestCase::running
This property will be set to true while the test case is running.
The initial value is false, and the value will become false again
once the test case completes.
\sa completed, when
*/
property bool running: false
/*!
\qmlproperty bool TestCase::optional
Multiple \l TestCase types can be supplied in a test application.
The application will exit once they have all completed. If a test case
does not need to run (because a precondition has failed), then this
property can be set to true. The default value is false.
\code
TestCase {
when: false
optional: true
function test_not_run() {
verify(false)
}
}
\endcode
\sa when, completed
*/
property bool optional: false
/*!
\qmlproperty bool TestCase::windowShown
This property will be set to true after the QML viewing window has
been displayed. Normally test cases run as soon as the test application
is loaded and before a window is displayed. If the test case involves
visual types and behaviors, then it may need to be delayed until
after the window is shown.
\code
Button {
id: button
onClicked: text = "Clicked"
TestCase {
name: "ClickTest"
when: windowShown
function test_click() {
button.clicked();
compare(button.text, "Clicked");
}
}
}
\endcode
*/
property bool windowShown: QTestRootObject.windowShown
// Internal private state. Identifiers prefixed with qtest are reserved.
/*! \internal */
property bool qtest_prevWhen: true
/*! \internal */
property int qtest_testId: -1
/*! \internal */
property bool qtest_componentCompleted : false
/*! \internal */
property var qtest_testCaseResult
/*! \internal */
property var qtest_results: qtest_results_normal
/*! \internal */
TestResult { id: qtest_results_normal }
/*! \internal */
property var qtest_events: qtest_events_normal
TestEvent { id: qtest_events_normal }
/*! \internal */
property var qtest_temporaryObjects: []
/*!
\qmlmethod TestCase::fail(message = "")
Fails the current test case, with the optional \a message.
Similar to \c{QFAIL(message)} in C++.
*/
function fail(msg) {
if (msg === undefined)
msg = "";
qtest_results.fail(msg, util.callerFile(), util.callerLine())
throw new Error("QtQuickTest::fail")
}
/*! \internal */
function qtest_fail(msg, frame) {
if (msg === undefined)
msg = "";
qtest_results.fail(msg, util.callerFile(frame), util.callerLine(frame))
throw new Error("QtQuickTest::fail")
}
/*!
\qmlmethod TestCase::verify(condition, message = "")
Fails the current test case if \a condition is false, and
displays the optional \a message. Similar to \c{QVERIFY(condition)}
or \c{QVERIFY2(condition, message)} in C++.
*/
function verify(cond, msg) {
if (arguments.length > 2)
qtest_fail("More than two arguments given to verify(). Did you mean tryVerify() or tryCompare()?", 1)
if (msg === undefined)
msg = "";
if (!qtest_results.verify(cond, msg, util.callerFile(), util.callerLine()))
throw new Error("QtQuickTest::fail")
}
/*!
\since 5.8
\qmlmethod TestCase::tryVerify(function, timeout = 5000, message = "")
Fails the current test case if \a function does not evaluate to
\c true before the specified \a timeout (in milliseconds) has elapsed.
The function is evaluated multiple times until the timeout is
reached. An optional \a message is displayed upon failure.
This function is intended for testing applications where a condition
changes based on asynchronous events. Use verify() for testing
synchronous condition changes, and tryCompare() for testing
asynchronous property changes.
For example, in the code below, it's not possible to use tryCompare(),
because the \c currentItem property might be \c null for a short period
of time:
\code
tryCompare(listView.currentItem, "text", "Hello");
\endcode
Instead, we can use tryVerify() to first check that \c currentItem
isn't \c null, and then use a regular compare afterwards:
\code
tryVerify(function(){ return listView.currentItem })
compare(listView.currentItem.text, "Hello")
\endcode
\sa verify(), compare(), tryCompare(), SignalSpy::wait()
*/
function tryVerify(expressionFunction, timeout, msg) {
if (!expressionFunction || !(expressionFunction instanceof Function)) {
qtest_results.fail("First argument must be a function", util.callerFile(), util.callerLine())
throw new Error("QtQuickTest::fail")
}
if (timeout && typeof(timeout) !== "number") {
qtest_results.fail("timeout argument must be a number", util.callerFile(), util.callerLine())
throw new Error("QtQuickTest::fail")
}
if (msg && typeof(msg) !== "string") {
qtest_results.fail("message argument must be a string", util.callerFile(), util.callerLine())
throw new Error("QtQuickTest::fail")
}
if (!timeout)
timeout = 5000
if (msg === undefined)
msg = "function returned false"
if (!expressionFunction())
wait(0)
var i = 0
while (i < timeout && !expressionFunction()) {
wait(50)
i += 50
}
if (!qtest_results.verify(expressionFunction(), msg, util.callerFile(), util.callerLine()))
throw new Error("QtQuickTest::fail")
}
/*!
\since 5.13
\qmlmethod bool TestCase::isPolishScheduled(object item)
Returns \c true if \l {QQuickItem::}{updatePolish()} has not been called
on \a item since the last call to \l {QQuickItem::}{polish()},
otherwise returns \c false.
When assigning values to properties in QML, any layouting the item
must do as a result of the assignment might not take effect immediately,
but can instead be postponed until the item is polished. For these cases,
you can use this function to ensure that the item has been polished
before the execution of the test continues. For example:
\code
verify(isPolishScheduled(item))
verify(waitForItemPolished(item))
\endcode
Without the call to \c isPolishScheduled() above, the
call to \c waitForItemPolished() might see that no polish
was scheduled and therefore pass instantly, assuming that
the item had already been polished. This function
makes it obvious why an item wasn't polished and allows tests to
fail early under such circumstances.
\sa waitForItemPolished(), QQuickItem::polish(), QQuickItem::updatePolish()
*/
function isPolishScheduled(item) {
if (!item || typeof item !== "object") {
qtest_results.fail("Argument must be a valid Item; actual type is " + typeof item,
util.callerFile(), util.callerLine())
throw new Error("QtQuickTest::fail")
}
return qtest_results.isPolishScheduled(item)
}
/*!
\since 5.13
\qmlmethod bool waitForItemPolished(object item, int timeout = 5000)
Waits for \a timeout milliseconds or until
\l {QQuickItem::}{updatePolish()} has been called on \a item.
Returns \c true if \c updatePolish() was called on \a item within
\a timeout milliseconds, otherwise returns \c false.
\sa isPolishScheduled(), QQuickItem::polish(), QQuickItem::updatePolish()
*/
function waitForItemPolished(item, timeout) {
if (!item || typeof item !== "object") {
qtest_results.fail("First argument must be a valid Item; actual type is " + typeof item,
util.callerFile(), util.callerLine())
throw new Error("QtQuickTest::fail")
}
if (timeout !== undefined && typeof(timeout) != "number") {
qtest_results.fail("Second argument must be a number; actual type is " + typeof timeout,
util.callerFile(), util.callerLine())
throw new Error("QtQuickTest::fail")
}
if (!timeout)
timeout = 5000
return qtest_results.waitForItemPolished(item, timeout)
}
/*!
\since 5.9
\qmlmethod object TestCase::createTemporaryQmlObject(string qml, object parent, string filePath)
This function dynamically creates a QML object from the given \a qml
string with the specified \a parent. The returned object will be
destroyed (if it was not already) after \l cleanup() has finished
executing, meaning that objects created with this function are
guaranteed to be destroyed after each test, regardless of whether or
not the tests fail.
If there was an error while creating the object, \c null will be
returned.
If \a filePath is specified, it will be used for error reporting for
the created object.
This function calls
\l {QtQml::Qt::createQmlObject()}{Qt.createQmlObject()} internally.
\sa {Managing Dynamically Created Test Objects}
*/
function createTemporaryQmlObject(qml, parent, filePath) {
if (typeof qml !== "string") {
qtest_results.fail("First argument must be a string of QML; actual type is " + typeof qml,
util.callerFile(), util.callerLine());
throw new Error("QtQuickTest::fail");
}
if (!parent || typeof parent !== "object") {
qtest_results.fail("Second argument must be a valid parent object; actual type is " + typeof parent,
util.callerFile(), util.callerLine());
throw new Error("QtQuickTest::fail");
}
if (filePath !== undefined && typeof filePath !== "string") {
qtest_results.fail("Third argument must be a file path string; actual type is " + typeof filePath,
util.callerFile(), util.callerLine());
throw new Error("QtQuickTest::fail");
}
var object = Qt.createQmlObject(qml, parent, filePath);
qtest_temporaryObjects.push(object);
return object;
}
/*!
\since 5.9
\qmlmethod object TestCase::createTemporaryObject(Component component, object parent, object properties)
This function dynamically creates a QML object from the given
\a component with the specified optional \a parent and \a properties.
The returned object will be destroyed (if it was not already) after
\l cleanup() has finished executing, meaning that objects created with
this function are guaranteed to be destroyed after each test,
regardless of whether or not the tests fail.
If there was an error while creating the object, \c null will be
returned.
This function calls
\l {QtQml::Component::createObject()}{component.createObject()}
internally.
\sa {Managing Dynamically Created Test Objects}
*/
function createTemporaryObject(component, parent, properties) {
if (typeof component !== "object") {
qtest_results.fail("First argument must be a Component; actual type is " + typeof component,
util.callerFile(), util.callerLine());
throw new Error("QtQuickTest::fail");
}
if (properties && typeof properties !== "object") {
qtest_results.fail("Third argument must be an object; actual type is " + typeof properties,
util.callerFile(), util.callerLine());
throw new Error("QtQuickTest::fail");
}
var object = component.createObject(parent, properties ? properties : ({}));
qtest_temporaryObjects.push(object);
return object;
}
/*!
\internal
Destroys all temporary objects that still exist.
*/
function qtest_destroyTemporaryObjects() {
for (var i = 0; i < qtest_temporaryObjects.length; ++i) {
var temporaryObject = qtest_temporaryObjects[i];
// ### the typeof check can be removed when QTBUG-57749 is fixed
if (temporaryObject && typeof temporaryObject.destroy === "function")
temporaryObject.destroy();
}
qtest_temporaryObjects = [];
}
/*! \internal */
// Determine what is o.
// Discussions and reference: http://philrathe.com/articles/equiv
// Test suites: http://philrathe.com/tests/equiv
// Author: Philippe Rathé <prathe@gmail.com>
function qtest_typeof(o) {
if (typeof o === "undefined") {
return "undefined";
// consider: typeof null === object
} else if (o === null) {
return "null";
} else if (o.constructor === String) {
return "string";
} else if (o.constructor === Boolean) {
return "boolean";
} else if (o.constructor === Number) {
if (isNaN(o)) {
return "nan";
} else {
return "number";
}
// consider: typeof [] === object
} else if (o instanceof Array) {
return "array";
// consider: typeof new Date() === object
} else if (o instanceof Date) {
return "date";
// consider: /./ instanceof Object;
// /./ instanceof RegExp;
// typeof /./ === "function"; // => false in IE and Opera,
// true in FF and Safari
} else if (o instanceof RegExp) {
return "regexp";
} else if (typeof o === "object") {
if ("mapFromItem" in o && "mapToItem" in o) {
return "declarativeitem"; // @todo improve detection of declarative items
} else if ("x" in o && "y" in o && "z" in o) {
return "vector3d"; // Qt 3D vector
}
return "object";
} else if (o instanceof Function) {
return "function";
} else {
return undefined;
}
}
/*! \internal */
// Test for equality
// Large parts contain sources from QUnit or http://philrathe.com
// Discussions and reference: http://philrathe.com/articles/equiv
// Test suites: http://philrathe.com/tests/equiv
// Author: Philippe Rathé <prathe@gmail.com>
function qtest_compareInternal(act, exp) {
var success = false;
if (act === exp) {
success = true; // catch the most you can
} else if (act === null || exp === null || typeof act === "undefined" || typeof exp === "undefined") {
success = false; // don't lose time with error prone cases
} else {
var typeExp = qtest_typeof(exp), typeAct = qtest_typeof(act)
if (typeExp !== typeAct) {
// allow object vs string comparison (e.g. for colors)
// else break on different types
if ((typeExp === "string" && (typeAct === "object") || typeAct == "declarativeitem")
|| ((typeExp === "object" || typeExp == "declarativeitem") && typeAct === "string")) {
success = (act == exp)
}
} else if (typeExp === "string" || typeExp === "boolean" ||
typeExp === "null" || typeExp === "undefined") {
if (exp instanceof act.constructor || act instanceof exp.constructor) {
// to catch short annotaion VS 'new' annotation of act declaration
// e.g. var i = 1;
// var j = new Number(1);
success = (act == exp)
} else {
success = (act === exp)
}
} else if (typeExp === "nan") {
success = isNaN(act);
} else if (typeExp === "number") {
// Use act fuzzy compare if the two values are floats
if (Math.abs(act - exp) <= 0.00001) {
success = true
}
} else if (typeExp === "array") {
success = qtest_compareInternalArrays(act, exp)
} else if (typeExp === "object") {
success = qtest_compareInternalObjects(act, exp)
} else if (typeExp === "declarativeitem") {
success = qtest_compareInternalObjects(act, exp) // @todo improve comparison of declarative items
} else if (typeExp === "vector3d") {
success = (Math.abs(act.x - exp.x) <= 0.00001 &&
Math.abs(act.y - exp.y) <= 0.00001 &&
Math.abs(act.z - exp.z) <= 0.00001)
} else if (typeExp === "date") {
success = (act.valueOf() === exp.valueOf())
} else if (typeExp === "regexp") {
success = (act.source === exp.source && // the regex itself
act.global === exp.global && // and its modifers (gmi) ...
act.ignoreCase === exp.ignoreCase &&
act.multiline === exp.multiline)
}
}
return success
}
/*! \internal */
function qtest_compareInternalObjects(act, exp) {
var i;
var eq = true; // unless we can proove it
var aProperties = [], bProperties = []; // collection of strings
// comparing constructors is more strict than using instanceof
if (act.constructor !== exp.constructor) {
return false;
}
for (i in act) { // be strict: don't ensures hasOwnProperty and go deep
aProperties.push(i); // collect act's properties
if (!qtest_compareInternal(act[i], exp[i])) {
eq = false;
break;
}
}
for (i in exp) {
bProperties.push(i); // collect exp's properties
}
if (aProperties.length == 0 && bProperties.length == 0) { // at least a special case for QUrl
return eq && (JSON.stringify(act) == JSON.stringify(exp));
}
// Ensures identical properties name
return eq && qtest_compareInternal(aProperties.sort(), bProperties.sort());
}
/*! \internal */
function qtest_compareInternalArrays(actual, expected) {
if (actual.length != expected.length) {
return false
}
for (var i = 0, len = actual.length; i < len; i++) {
if (!qtest_compareInternal(actual[i], expected[i])) {
return false
}
}
return true
}
/*!
\qmlmethod TestCase::compare(actual, expected, message = "")
Fails the current test case if \a actual is not the same as
\a expected, and displays the optional \a message. Similar
to \c{QCOMPARE(actual, expected)} in C++.
\sa tryCompare(), fuzzyCompare
*/
function compare(actual, expected, msg) {
var act = qtest_results.stringify(actual)
var exp = qtest_results.stringify(expected)
var success = qtest_compareInternal(actual, expected)
if (msg === undefined) {
if (success)
msg = "COMPARE()"
else
msg = "Compared values are not the same"
}
if (!qtest_results.compare(success, msg, act, exp, util.callerFile(), util.callerLine())) {
throw new Error("QtQuickTest::fail")
}
}
/*!
\qmlmethod TestCase::fuzzyCompare(actual, expected, delta, message = "")
Fails the current test case if the difference betwen \a actual and \a expected
is greater than \a delta, and displays the optional \a message. Similar
to \c{qFuzzyCompare(actual, expected)} in C++ but with a required \a delta value.
This function can also be used for color comparisons if both the \a actual and
\a expected values can be converted into color values. If any of the differences
for RGBA channel values are greater than \a delta, the test fails.
\sa tryCompare(), compare()
*/
function fuzzyCompare(actual, expected, delta, msg) {
if (delta === undefined)
qtest_fail("A delta value is required for fuzzyCompare", 2)
var success = qtest_results.fuzzyCompare(actual, expected, delta)
if (msg === undefined) {
if (success)
msg = "FUZZYCOMPARE()"
else
msg = "Compared values are not the same with delta(" + delta + ")"
}
if (!qtest_results.compare(success, msg, actual, expected, util.callerFile(), util.callerLine())) {
throw new Error("QtQuickTest::fail")
}
}
/*!
\qmlmethod object TestCase::grabImage(item)
Returns a snapshot image object of the given \a item.
The returned image object has the following properties:
\list
\li width Returns the width of the underlying image (since 5.10)
\li height Returns the height of the underlying image (since 5.10)
\li size Returns the size of the underlying image (since 5.10)
\endlist
Additionally, the returned image object has the following methods:
\list
\li \c {red(x, y)} Returns the red channel value of the pixel at \e x, \e y position
\li \c {green(x, y)} Returns the green channel value of the pixel at \e x, \e y position
\li \c {blue(x, y)} Returns the blue channel value of the pixel at \e x, \e y position
\li \c {alpha(x, y)} Returns the alpha channel value of the pixel at \e x, \e y position
\li \c {pixel(x, y)} Returns the color value of the pixel at \e x, \e y position
\li \c {equals(image)} Returns \c true if this image is identical to \e image -
see \l QImage::operator== (since 5.6)
For example:
\code
var image = grabImage(rect);
compare(image.red(10, 10), 255);
compare(image.pixel(20, 20), Qt.rgba(255, 0, 0, 255));
rect.width += 10;
var newImage = grabImage(rect);
verify(!newImage.equals(image));
\endcode
\li \c {save(path)} Saves the image to the given \e path. If the image cannot
be saved, an exception will be thrown. (since 5.10)
This can be useful to perform postmortem analysis on failing tests, for
example:
\code
var image = grabImage(rect);
try {
compare(image.width, 100);
} catch (ex) {
image.save("debug.png");
throw ex;
}
\endcode
\endlist
*/
function grabImage(item) {
return qtest_results.grabImage(item);
}
/*!
\since 5.4
\qmlmethod QtObject TestCase::findChild(parent, objectName)
Returns the first child of \a parent with \a objectName, or \c null if
no such item exists. Both visual and non-visual children are searched
recursively, with visual children being searched first.
\code
compare(findChild(item, "childObject"), expectedChildObject);
\endcode
*/
function findChild(parent, objectName) {
// First, search the visual item hierarchy.
var child = qtest_findVisualChild(parent, objectName);
if (child)
return child;
// If it's not a visual child, it might be a QObject child.
return qtest_results.findChild(parent, objectName);
}
/*! \internal */
function qtest_findVisualChild(parent, objectName) {
if (!parent || parent.children === undefined)
return null;
for (var i = 0; i < parent.children.length; ++i) {
// Is this direct child of ours the child we're after?
var child = parent.children[i];
if (child.objectName === objectName)
return child;
}
for (i = 0; i < parent.children.length; ++i) {
// Try the direct child's children.
child = qtest_findVisualChild(parent.children[i], objectName);
if (child)
return child;
}
return null;
}
/*!
\qmlmethod TestCase::tryCompare(obj, property, expected, timeout = 5000, message = "")
Fails the current test case if the specified \a property on \a obj
is not the same as \a expected, and displays the optional \a message.
The test will be retried multiple times until the
\a timeout (in milliseconds) is reached.
This function is intended for testing applications where a property
changes value based on asynchronous events. Use compare() for testing
synchronous property changes.
\code
tryCompare(img, "status", BorderImage.Ready)
compare(img.width, 120)
compare(img.height, 120)
compare(img.horizontalTileMode, BorderImage.Stretch)
compare(img.verticalTileMode, BorderImage.Stretch)
\endcode
SignalSpy::wait() provides an alternative method to wait for a
signal to be emitted.
\sa compare(), SignalSpy::wait()
*/
function tryCompare(obj, prop, value, timeout, msg) {
if (arguments.length == 1 || (typeof(prop) != "string" && typeof(prop) != "number")) {
qtest_results.fail("A property name as string or index is required for tryCompare",
util.callerFile(), util.callerLine())
throw new Error("QtQuickTest::fail")
}
if (arguments.length == 2) {
qtest_results.fail("A value is required for tryCompare",
util.callerFile(), util.callerLine())
throw new Error("QtQuickTest::fail")
}
if (timeout !== undefined && typeof(timeout) != "number") {
qtest_results.fail("timeout should be a number",
util.callerFile(), util.callerLine())
throw new Error("QtQuickTest::fail")
}
if (!timeout)
timeout = 5000
if (msg === undefined)
msg = "property " + prop
if (!qtest_compareInternal(obj[prop], value))
wait(0)
var i = 0
while (i < timeout && !qtest_compareInternal(obj[prop], value)) {
wait(50)
i += 50
}
var actual = obj[prop]
var act = qtest_results.stringify(actual)
var exp = qtest_results.stringify(value)
var success = qtest_compareInternal(actual, value)
if (!qtest_results.compare(success, msg, act, exp, util.callerFile(), util.callerLine()))
throw new Error("QtQuickTest::fail")
}
/*!
\qmlmethod TestCase::skip(message = "")
Skips the current test case and prints the optional \a message.
If this is a data-driven test, then only the current row is skipped.
Similar to \c{QSKIP(message)} in C++.
*/
function skip(msg) {
if (msg === undefined)
msg = ""
qtest_results.skip(msg, util.callerFile(), util.callerLine())
throw new Error("QtQuickTest::skip")
}
/*!
\qmlmethod TestCase::expectFail(tag, message)
In a data-driven test, marks the row associated with \a tag as
expected to fail. When the fail occurs, display the \a message,
abort the test, and mark the test as passing. Similar to
\c{QEXPECT_FAIL(tag, message, Abort)} in C++.
If the test is not data-driven, then \a tag must be set to
an empty string.
\sa expectFailContinue()
*/
function expectFail(tag, msg) {
if (tag === undefined) {
warn("tag argument missing from expectFail()")
tag = ""
}
if (msg === undefined) {
warn("message argument missing from expectFail()")
msg = ""
}
if (!qtest_results.expectFail(tag, msg, util.callerFile(), util.callerLine()))
throw new Error("QtQuickTest::expectFail")
}
/*!
\qmlmethod TestCase::expectFailContinue(tag, message)
In a data-driven test, marks the row associated with \a tag as
expected to fail. When the fail occurs, display the \a message,
and then continue the test. Similar to
\c{QEXPECT_FAIL(tag, message, Continue)} in C++.
If the test is not data-driven, then \a tag must be set to
an empty string.
\sa expectFail()
*/
function expectFailContinue(tag, msg) {
if (tag === undefined) {
warn("tag argument missing from expectFailContinue()")
tag = ""
}
if (msg === undefined) {
warn("message argument missing from expectFailContinue()")
msg = ""
}
if (!qtest_results.expectFailContinue(tag, msg, util.callerFile(), util.callerLine()))
throw new Error("QtQuickTest::expectFail")
}
/*!
\qmlmethod TestCase::warn(message)
Prints \a message as a warning message. Similar to
\c{QWARN(message)} in C++.
\sa ignoreWarning()
*/
function warn(msg) {
if (msg === undefined)
msg = ""
qtest_results.warn(msg, util.callerFile(), util.callerLine());
}
/*!
\qmlmethod TestCase::ignoreWarning(message)
Marks \a message as an ignored warning message. When it occurs,
the warning will not be printed and the test passes. If the message
does not occur, then the test will fail. Similar to
\c{QTest::ignoreMessage(QtWarningMsg, message)} in C++.
Since Qt 5.12, \a message can be either a string, or a regular
expression providing a pattern of messages to ignore.
For example, the following snippet will ignore a string warning message:
\qml
ignoreWarning("Something sort of bad happened")
\endqml
And the following snippet will ignore a regular expression matching a
number of possible warning messages:
\qml
ignoreWarning(new RegExp("[0-9]+ bad things happened"))
\endqml
\note Despite being a JavaScript RegExp object, it will not be
interpreted as such; instead, the pattern will be passed to
\l QRegularExpression.
\sa warn()
*/
function ignoreWarning(msg) {
if (msg === undefined)
msg = ""
qtest_results.ignoreWarning(msg)
}
/*!
\qmlmethod TestCase::wait(ms)
Waits for \a ms milliseconds while processing Qt events.
\sa sleep(), waitForRendering()
*/
function wait(ms) {
qtest_results.wait(ms)
}
/*!
\qmlmethod TestCase::waitForRendering(item, timeout = 5000)
Waits for \a timeout milliseconds or until the \a item is rendered by the renderer.
Returns true if \c item is rendered in \a timeout milliseconds, otherwise returns false.
The default \a timeout value is 5000.
\sa sleep(), wait()
*/
function waitForRendering(item, timeout) {
if (timeout === undefined)
timeout = 5000
if (!qtest_verifyItem(item, "waitForRendering"))
return
return qtest_results.waitForRendering(item, timeout)
}
/*!
\qmlmethod TestCase::sleep(ms)
Sleeps for \a ms milliseconds without processing Qt events.
\sa wait(), waitForRendering()
*/
function sleep(ms) {
qtest_results.sleep(ms)
}
/*!
\qmlmethod TestCase::keyPress(key, modifiers = Qt.NoModifier, delay = -1)
Simulates pressing a \a key with optional \a modifiers on the currently
focused item. If \a delay is larger than 0, the test will wait for
\a delay milliseconds.
The event will be sent to the TestCase window or, in case of multiple windows,
to the current active window. See \l QGuiApplication::focusWindow() for more details.
\b{Note:} At some point you should release the key using keyRelease().
\sa keyRelease(), keyClick()
*/
function keyPress(key, modifiers, delay) {
if (modifiers === undefined)
modifiers = Qt.NoModifier
if (delay == undefined)
delay = -1
if (typeof(key) == "string" && key.length == 1) {
if (!qtest_events.keyPressChar(key, modifiers, delay))
qtest_fail("window not shown", 2)
} else {
if (!qtest_events.keyPress(key, modifiers, delay))
qtest_fail("window not shown", 2)
}
}
/*!
\qmlmethod TestCase::keyRelease(key, modifiers = Qt.NoModifier, delay = -1)
Simulates releasing a \a key with optional \a modifiers on the currently
focused item. If \a delay is larger than 0, the test will wait for
\a delay milliseconds.
The event will be sent to the TestCase window or, in case of multiple windows,
to the current active window. See \l QGuiApplication::focusWindow() for more details.
\sa keyPress(), keyClick()
*/
function keyRelease(key, modifiers, delay) {
if (modifiers === undefined)
modifiers = Qt.NoModifier
if (delay == undefined)
delay = -1
if (typeof(key) == "string" && key.length == 1) {
if (!qtest_events.keyReleaseChar(key, modifiers, delay))
qtest_fail("window not shown", 2)
} else {
if (!qtest_events.keyRelease(key, modifiers, delay))
qtest_fail("window not shown", 2)
}
}
/*!
\qmlmethod TestCase::keyClick(key, modifiers = Qt.NoModifier, delay = -1)
Simulates clicking of \a key with optional \a modifiers on the currently
focused item. If \a delay is larger than 0, the test will wait for
\a delay milliseconds.
The event will be sent to the TestCase window or, in case of multiple windows,
to the current active window. See \l QGuiApplication::focusWindow() for more details.
\sa keyPress(), keyRelease()
*/
function keyClick(key, modifiers, delay) {
if (modifiers === undefined)
modifiers = Qt.NoModifier
if (delay == undefined)
delay = -1
if (typeof(key) == "string" && key.length == 1) {
if (!qtest_events.keyClickChar(key, modifiers, delay))
qtest_fail("window not shown", 2)
} else {
if (!qtest_events.keyClick(key, modifiers, delay))
qtest_fail("window not shown", 2)
}
}
/*!
\since 5.10
\qmlmethod TestCase::keySequence(keySequence)
Simulates typing of \a keySequence. The key sequence can be set
to one of the \l{QKeySequence::StandardKey}{standard keyboard shortcuts}, or
it can be described with a string containing a sequence of up to four key
presses.
Each event shall be sent to the TestCase window or, in case of multiple windows,
to the current active window. See \l QGuiApplication::focusWindow() for more details.
\sa keyPress(), keyRelease(), {GNU Emacs Style Key Sequences},
{QtQuick::Shortcut::sequence}{Shortcut.sequence}
*/
function keySequence(keySequence) {
if (!qtest_events.keySequence(keySequence))
qtest_fail("window not shown", 2)
}
/*!
\qmlmethod TestCase::mousePress(item, x = item.width / 2, y = item.height / 2, button = Qt.LeftButton, modifiers = Qt.NoModifier, delay = -1)
Simulates pressing a mouse \a button with optional \a modifiers
on an \a item. The position is defined by \a x and \a y.
If \a x or \a y are not defined the position will be the center of \a item.
If \a delay is specified, the test will wait for the specified amount of
milliseconds before the press.
The position given by \a x and \a y is transformed from the co-ordinate
system of \a item into window co-ordinates and then delivered.
If \a item is obscured by another item, or a child of \a item occupies
that position, then the event will be delivered to the other item instead.
\sa mouseRelease(), mouseClick(), mouseDoubleClickSequence(), mouseMove(), mouseDrag(), mouseWheel()
*/
function mousePress(item, x, y, button, modifiers, delay) {
if (!qtest_verifyItem(item, "mousePress"))
return
if (button === undefined)
button = Qt.LeftButton
if (modifiers === undefined)
modifiers = Qt.NoModifier
if (delay == undefined)
delay = -1
if (x === undefined)
x = item.width / 2
if (y === undefined)
y = item.height / 2
if (!qtest_events.mousePress(item, x, y, button, modifiers, delay))
qtest_fail("window not shown", 2)
}
/*!
\qmlmethod TestCase::mouseRelease(item, x = item.width / 2, y = item.height / 2, button = Qt.LeftButton, modifiers = Qt.NoModifier, delay = -1)
Simulates releasing a mouse \a button with optional \a modifiers
on an \a item. The position of the release is defined by \a x and \a y.
If \a x or \a y are not defined the position will be the center of \a item.
If \a delay is specified, the test will wait for the specified amount of
milliseconds before releasing the button.
The position given by \a x and \a y is transformed from the co-ordinate
system of \a item into window co-ordinates and then delivered.
If \a item is obscured by another item, or a child of \a item occupies
that position, then the event will be delivered to the other item instead.
\sa mousePress(), mouseClick(), mouseDoubleClickSequence(), mouseMove(), mouseDrag(), mouseWheel()
*/
function mouseRelease(item, x, y, button, modifiers, delay) {
if (!qtest_verifyItem(item, "mouseRelease"))
return
if (button === undefined)
button = Qt.LeftButton
if (modifiers === undefined)
modifiers = Qt.NoModifier
if (delay == undefined)
delay = -1
if (x === undefined)
x = item.width / 2
if (y === undefined)
y = item.height / 2
if (!qtest_events.mouseRelease(item, x, y, button, modifiers, delay))
qtest_fail("window not shown", 2)
}
/*!
\qmlmethod TestCase::mouseDrag(item, x, y, dx, dy, button = Qt.LeftButton, modifiers = Qt.NoModifier, delay = -1)
Simulates dragging the mouse on an \a item with \a button pressed and optional \a modifiers
The initial drag position is defined by \a x and \a y,
and drag distance is defined by \a dx and \a dy. If \a delay is specified,
the test will wait for the specified amount of milliseconds before releasing the button.
The position given by \a x and \a y is transformed from the co-ordinate
system of \a item into window co-ordinates and then delivered.
If \a item is obscured by another item, or a child of \a item occupies
that position, then the event will be delivered to the other item instead.
\sa mousePress(), mouseClick(), mouseDoubleClickSequence(), mouseMove(), mouseRelease(), mouseWheel()
*/
function mouseDrag(item, x, y, dx, dy, button, modifiers, delay) {
if (!qtest_verifyItem(item, "mouseDrag"))
return
if (item.x === undefined || item.y === undefined)
return
if (button === undefined)
button = Qt.LeftButton
if (modifiers === undefined)
modifiers = Qt.NoModifier
if (delay == undefined)
delay = -1
var moveDelay = Math.max(1, delay === -1 ? qtest_events.defaultMouseDelay : delay)
// Divide dx and dy to have intermediate mouseMove while dragging
// Fractions of dx/dy need be superior to the dragThreshold
// to make the drag works though
var intermediateDx = Math.round(dx/3)
if (Math.abs(intermediateDx) < (util.dragThreshold + 1))
intermediateDx = 0
var intermediateDy = Math.round(dy/3)
if (Math.abs(intermediateDy) < (util.dragThreshold + 1))
intermediateDy = 0
mousePress(item, x, y, button, modifiers, delay)
// Trigger dragging by dragging past the drag threshold, but making sure to only drag
// along a certain axis if a distance greater than zero was given for that axis.
var dragTriggerXDistance = dx > 0 ? (util.dragThreshold + 1) : 0
var dragTriggerYDistance = dy > 0 ? (util.dragThreshold + 1) : 0
mouseMove(item, x + dragTriggerXDistance, y + dragTriggerYDistance, moveDelay, button)
if (intermediateDx !== 0 || intermediateDy !== 0) {
mouseMove(item, x + intermediateDx, y + intermediateDy, moveDelay, button)
mouseMove(item, x + 2*intermediateDx, y + 2*intermediateDy, moveDelay, button)
}
mouseMove(item, x + dx, y + dy, moveDelay, button)
mouseRelease(item, x + dx, y + dy, button, modifiers, delay)
}
/*!
\qmlmethod TestCase::mouseClick(item, x = item.width / 2, y = item.height / 2, button = Qt.LeftButton, modifiers = Qt.NoModifier, delay = -1)
Simulates clicking a mouse \a button with optional \a modifiers
on an \a item. The position of the click is defined by \a x and \a y.
If \a x and \a y are not defined the position will be the center of \a item.
If \a delay is specified, the test will wait for the specified amount of
milliseconds before pressing and before releasing the button.
The position given by \a x and \a y is transformed from the co-ordinate
system of \a item into window co-ordinates and then delivered.
If \a item is obscured by another item, or a child of \a item occupies
that position, then the event will be delivered to the other item instead.
\sa mousePress(), mouseRelease(), mouseDoubleClickSequence(), mouseMove(), mouseDrag(), mouseWheel()
*/
function mouseClick(item, x, y, button, modifiers, delay) {
if (!qtest_verifyItem(item, "mouseClick"))
return
if (button === undefined)
button = Qt.LeftButton
if (modifiers === undefined)
modifiers = Qt.NoModifier
if (delay == undefined)
delay = -1
if (x === undefined)
x = item.width / 2
if (y === undefined)
y = item.height / 2
if (!qtest_events.mouseClick(item, x, y, button, modifiers, delay))
qtest_fail("window not shown", 2)
}
/*!
\qmlmethod TestCase::mouseDoubleClick(item, x = item.width / 2, y = item.height / 2, button = Qt.LeftButton, modifiers = Qt.NoModifier, delay = -1)
\deprecated
Simulates double-clicking a mouse \a button with optional \a modifiers
on an \a item. The position of the click is defined by \a x and \a y.
If \a x and \a y are not defined the position will be the center of \a item.
If \a delay is specified, the test will wait for the specified amount of
milliseconds before pressing and before releasing the button.
The position given by \a x and \a y is transformed from the co-ordinate
system of \a item into window co-ordinates and then delivered.
If \a item is obscured by another item, or a child of \a item occupies
that position, then the event will be delivered to the other item instead.
\sa mouseDoubleClickSequence(), mousePress(), mouseRelease(), mouseClick(), mouseMove(), mouseDrag(), mouseWheel()
*/
function mouseDoubleClick(item, x, y, button, modifiers, delay) {
if (!qtest_verifyItem(item, "mouseDoubleClick"))
return
if (button === undefined)
button = Qt.LeftButton
if (modifiers === undefined)
modifiers = Qt.NoModifier
if (delay == undefined)
delay = -1
if (x === undefined)
x = item.width / 2
if (y === undefined)
y = item.height / 2
if (!qtest_events.mouseDoubleClick(item, x, y, button, modifiers, delay))
qtest_fail("window not shown", 2)
}
/*!
\qmlmethod TestCase::mouseDoubleClickSequence(item, x = item.width / 2, y = item.height / 2, button = Qt.LeftButton, modifiers = Qt.NoModifier, delay = -1)
Simulates the full sequence of events generated by double-clicking a mouse
\a button with optional \a modifiers on an \a item.
This method reproduces the sequence of mouse events generated when a user makes
a double click: Press-Release-Press-DoubleClick-Release.
The position of the click is defined by \a x and \a y.
If \a x and \a y are not defined the position will be the center of \a item.
If \a delay is specified, the test will wait for the specified amount of
milliseconds before pressing and before releasing the button.
The position given by \a x and \a y is transformed from the co-ordinate
system of \a item into window co-ordinates and then delivered.
If \a item is obscured by another item, or a child of \a item occupies
that position, then the event will be delivered to the other item instead.
This QML method was introduced in Qt 5.5.
\sa mousePress(), mouseRelease(), mouseClick(), mouseMove(), mouseDrag(), mouseWheel()
*/
function mouseDoubleClickSequence(item, x, y, button, modifiers, delay) {
if (!qtest_verifyItem(item, "mouseDoubleClickSequence"))
return
if (button === undefined)
button = Qt.LeftButton
if (modifiers === undefined)
modifiers = Qt.NoModifier
if (delay == undefined)
delay = -1
if (x === undefined)
x = item.width / 2
if (y === undefined)
y = item.height / 2
if (!qtest_events.mouseDoubleClickSequence(item, x, y, button, modifiers, delay))
qtest_fail("window not shown", 2)
}
/*!
\qmlmethod TestCase::mouseMove(item, x, y, delay = -1)
Moves the mouse pointer to the position given by \a x and \a y within
\a item. If a \a delay (in milliseconds) is given, the test will wait
before moving the mouse pointer.
The position given by \a x and \a y is transformed from the co-ordinate
system of \a item into window co-ordinates and then delivered.
If \a item is obscured by another item, or a child of \a item occupies
that position, then the event will be delivered to the other item instead.
\sa mousePress(), mouseRelease(), mouseClick(), mouseDoubleClickSequence(), mouseDrag(), mouseWheel()
*/
function mouseMove(item, x, y, delay, buttons) {
if (!qtest_verifyItem(item, "mouseMove"))
return
if (delay == undefined)
delay = -1
if (buttons == undefined)
buttons = Qt.NoButton
if (!qtest_events.mouseMove(item, x, y, delay, buttons))
qtest_fail("window not shown", 2)
}
/*!
\qmlmethod TestCase::mouseWheel(item, x, y, xDelta, yDelta, button = Qt.LeftButton, modifiers = Qt.NoModifier, delay = -1)
Simulates rotating the mouse wheel on an \a item with \a button pressed and optional \a modifiers.
The position of the wheel event is defined by \a x and \a y.
If \a delay is specified, the test will wait for the specified amount of milliseconds before releasing the button.
The position given by \a x and \a y is transformed from the co-ordinate
system of \a item into window co-ordinates and then delivered.
If \a item is obscured by another item, or a child of \a item occupies
that position, then the event will be delivered to the other item instead.
The \a xDelta and \a yDelta contain the wheel rotation distance in eighths of a degree. see \l QWheelEvent::angleDelta() for more details.
\sa mousePress(), mouseClick(), mouseDoubleClickSequence(), mouseMove(), mouseRelease(), mouseDrag(), QWheelEvent::angleDelta()
*/
function mouseWheel(item, x, y, xDelta, yDelta, buttons, modifiers, delay) {
if (!qtest_verifyItem(item, "mouseWheel"))
return
if (delay == undefined)
delay = -1
if (buttons == undefined)
buttons = Qt.NoButton
if (modifiers === undefined)
modifiers = Qt.NoModifier
if (xDelta == undefined)
xDelta = 0
if (yDelta == undefined)
yDelta = 0
if (!qtest_events.mouseWheel(item, x, y, buttons, modifiers, xDelta, yDelta, delay))
qtest_fail("window not shown", 2)
}
/*!
\qmlmethod TouchEventSequence TestCase::touchEvent(object item)
\since 5.9
Begins a sequence of touch events through a simulated QTouchDevice::TouchScreen.
Events are delivered to the window containing \a item.
The returned object is used to enumerate events to be delivered through a single
QTouchEvent. Touches are delivered to the window containing the TestCase unless
otherwise specified.
\code
Rectangle {
width: 640; height: 480
MultiPointTouchArea {
id: area
anchors.fill: parent
property bool touched: false
onPressed: touched = true
}
TestCase {
name: "ItemTests"
when: windowShown
id: test1
function test_touch() {
var touch = touchEvent(area);
touch.press(0, area, 10, 10);
touch.commit();
verify(area.touched);
}
}
}
\endcode
\sa TouchEventSequence::press(), TouchEventSequence::move(), TouchEventSequence::release(), TouchEventSequence::stationary(), TouchEventSequence::commit(), QTouchDevice::TouchScreen
*/
function touchEvent(item) {
if (!qtest_verifyItem(item, "touchEvent"))
return
return {
_defaultItem: item,
_sequence: qtest_events.touchEvent(item),
press: function (id, target, x, y) {
if (!target)
target = this._defaultItem;
if (id === undefined)
qtest_fail("No id given to TouchEventSequence::press", 1);
if (x === undefined)
x = target.width / 2;
if (y === undefined)
y = target.height / 2;
this._sequence.press(id, target, x, y);
return this;
},
move: function (id, target, x, y) {
if (!target)
target = this._defaultItem;
if (id === undefined)
qtest_fail("No id given to TouchEventSequence::move", 1);
if (x === undefined)
x = target.width / 2;
if (y === undefined)
y = target.height / 2;
this._sequence.move(id, target, x, y);
return this;
},
stationary: function (id) {
if (id === undefined)
qtest_fail("No id given to TouchEventSequence::stationary", 1);
this._sequence.stationary(id);
return this;
},
release: function (id, target, x, y) {
if (!target)
target = this._defaultItem;
if (id === undefined)
qtest_fail("No id given to TouchEventSequence::release", 1);
if (x === undefined)
x = target.width / 2;
if (y === undefined)
y = target.height / 2;
this._sequence.release(id, target, x, y);
return this;
},
commit: function () {
this._sequence.commit();
return this;
}
};
}
// Functions that can be overridden in subclasses for init/cleanup duties.
/*!
\qmlmethod TestCase::initTestCase()
This function is called before any other test functions in the
\l TestCase type. The default implementation does nothing.
The application can provide its own implementation to perform
test case initialization.
\sa cleanupTestCase(), init()
*/
function initTestCase() {}
/*!
\qmlmethod TestCase::cleanupTestCase()
This function is called after all other test functions in the
\l TestCase type have completed. The default implementation
does nothing. The application can provide its own implementation
to perform test case cleanup.
\sa initTestCase(), cleanup()
*/
function cleanupTestCase() {}
/*!
\qmlmethod TestCase::init()
This function is called before each test function that is
executed in the \l TestCase type. The default implementation
does nothing. The application can provide its own implementation
to perform initialization before each test function.
\sa cleanup(), initTestCase()
*/
function init() {}
/*!
\qmlmethod TestCase::cleanup()
This function is called after each test function that is
executed in the \l TestCase type. The default implementation
does nothing. The application can provide its own implementation
to perform cleanup after each test function.
\sa init(), cleanupTestCase()
*/
function cleanup() {}
/*! \internal */
function qtest_verifyItem(item, method) {
try {
if (!(item instanceof Item) &&
!(item instanceof Window)) {
// it's a QObject, but not a type
qtest_fail("TypeError: %1 requires an Item or Window type".arg(method), 2);
return false;
}
} catch (e) { // it's not a QObject
qtest_fail("TypeError: %1 requires an Item or Window type".arg(method), 3);
return false;
}
return true;
}
/*! \internal */
function qtest_runInternal(prop, arg) {
try {
qtest_testCaseResult = testCase[prop](arg)
} catch (e) {
qtest_testCaseResult = []
if (e.message.indexOf("QtQuickTest::") != 0) {
// Test threw an unrecognized exception - fail.
qtest_results.fail("Uncaught exception: " + e.message,
e.fileName, e.lineNumber)
}
}
return !qtest_results.failed
}
/*! \internal */
function qtest_runFunction(prop, arg) {
qtest_runInternal("init")
if (!qtest_results.skipped) {
qtest_runInternal(prop, arg)
qtest_results.finishTestData()
qtest_runInternal("cleanup")
qtest_destroyTemporaryObjects()
qtest_results.finishTestDataCleanup()
// wait(0) will call processEvents() so objects marked for deletion
// in the test function will be deleted.
wait(0)
}
}
/*! \internal */
function qtest_runBenchmarkFunction(prop, arg) {
qtest_results.startMeasurement()
do {
qtest_results.beginDataRun()
do {
// Run the initialization function.
qtest_runInternal("init")
if (qtest_results.skipped)
break
// Execute the benchmark function.
if (prop.indexOf("benchmark_once_") != 0)
qtest_results.startBenchmark(TestResult.RepeatUntilValidMeasurement, qtest_results.dataTag)
else
qtest_results.startBenchmark(TestResult.RunOnce, qtest_results.dataTag)
while (!qtest_results.isBenchmarkDone()) {
var success = qtest_runInternal(prop, arg)
qtest_results.finishTestData()
if (!success)
break
qtest_results.nextBenchmark()
}
qtest_results.stopBenchmark()
// Run the cleanup function.
qtest_runInternal("cleanup")
qtest_results.finishTestDataCleanup()
// wait(0) will call processEvents() so objects marked for deletion
// in the test function will be deleted.
wait(0)
} while (!qtest_results.measurementAccepted())
qtest_results.endDataRun()
} while (qtest_results.needsMoreMeasurements())
}
/*! \internal */
function qtest_run() {
if (TestLogger.log_start_test()) {
qtest_results.reset()
qtest_results.testCaseName = name
qtest_results.startLogging()
} else {
qtest_results.testCaseName = name
}
running = true
// Check the run list to see if this class is mentioned.
let checkNames = false
let testsToRun = {} // explicitly provided function names to run and their tags for data-driven tests
if (qtest_results.functionsToRun.length > 0) {
checkNames = true
var found = false
if (name.length > 0) {
for (var index in qtest_results.functionsToRun) {
let caseFuncName = qtest_results.functionsToRun[index]
if (caseFuncName.indexOf(name + "::") != 0)
continue
found = true
let funcName = caseFuncName.substring(name.length + 2)
if (!(funcName in testsToRun))
testsToRun[funcName] = []
let tagName = qtest_results.tagsToRun[index]
if (tagName.length > 0) // empty tags mean run all rows
testsToRun[funcName].push(tagName)
}
}
if (!found) {
completed = true
if (!TestLogger.log_complete_test(qtest_testId)) {
qtest_results.stopLogging()
Qt.quit()
}
qtest_results.testCaseName = ""
return
}
}
// Run the initTestCase function.
qtest_results.functionName = "initTestCase"
var runTests = true
if (!qtest_runInternal("initTestCase"))
runTests = false
qtest_results.finishTestData()
qtest_results.finishTestDataCleanup()
qtest_results.finishTestFunction()
// Run the test methods.
var testList = []
if (runTests) {
for (var prop in testCase) {
if (prop.indexOf("test_") != 0 && prop.indexOf("benchmark_") != 0)
continue
var tail = prop.lastIndexOf("_data");
if (tail != -1 && tail == (prop.length - 5))
continue
testList.push(prop)
}
testList.sort()
}
for (var index in testList) {
var prop = testList[index]
if (checkNames && !(prop in testsToRun))
continue
var datafunc = prop + "_data"
var isBenchmark = (prop.indexOf("benchmark_") == 0)
qtest_results.functionName = prop
if (!(datafunc in testCase))
datafunc = "init_data";
if (datafunc in testCase) {
if (qtest_runInternal(datafunc)) {
var table = qtest_testCaseResult
var haveData = false
let checkTags = (checkNames && testsToRun[prop].length > 0)
qtest_results.initTestTable()
for (var index in table) {
haveData = true
var row = table[index]
if (!row.tag)
row.tag = "row " + index // Must have something
if (checkTags) {
let tags = testsToRun[prop]
let tagIdx = tags.indexOf(row.tag)
if (tagIdx < 0)
continue
tags.splice(tagIdx, 1)
}
qtest_results.dataTag = row.tag
if (isBenchmark)
qtest_runBenchmarkFunction(prop, row)
else
qtest_runFunction(prop, row)
qtest_results.dataTag = ""
qtest_results.skipped = false
}
if (!haveData) {
if (datafunc === "init_data")
qtest_runFunction(prop, null, isBenchmark)
else
qtest_results.warn("no data supplied for " + prop + "() by " + datafunc + "()"
, util.callerFile(), util.callerLine());
}
qtest_results.clearTestTable()
}
} else if (isBenchmark) {
qtest_runBenchmarkFunction(prop, null, isBenchmark)
} else {
qtest_runFunction(prop, null, isBenchmark)
}
qtest_results.finishTestFunction()
qtest_results.skipped = false
if (checkNames && testsToRun[prop].length <= 0)
delete testsToRun[prop]
}
// Run the cleanupTestCase function.
qtest_results.skipped = false
qtest_results.functionName = "cleanupTestCase"
qtest_runInternal("cleanupTestCase")
// Complain about missing functions that we were supposed to run.
if (checkNames) {
let missingTests = []
for (var func in testsToRun) {
let caseFuncName = name + '::' + func
let tags = testsToRun[func]
if (tags.length <= 0)
missingTests.push(caseFuncName)
else
for (var i in tags)
missingTests.push(caseFuncName + ':' + tags[i])
}
missingTests.sort()
if (missingTests.length > 0)
qtest_results.fail("Could not find test functions: " + missingTests, "", 0)
}
// Clean up and exit.
running = false
completed = true
qtest_results.finishTestData()
qtest_results.finishTestDataCleanup()
qtest_results.finishTestFunction()
qtest_results.functionName = ""
// Stop if there are no more tests to be run.
if (!TestLogger.log_complete_test(qtest_testId)) {
qtest_results.stopLogging()
Qt.quit()
}
qtest_results.testCaseName = ""
}
onWhenChanged: {
if (when != qtest_prevWhen) {
qtest_prevWhen = when
if (when && !completed && !running && qtest_componentCompleted)
qtest_run()
}
}
onOptionalChanged: {
if (!completed) {
if (optional)
TestLogger.log_optional_test(qtest_testId)
else
TestLogger.log_mandatory_test(qtest_testId)
}
}
Component.onCompleted: {
QTestRootObject.hasTestCase = true;
qtest_componentCompleted = true;
qtest_testId = TestLogger.log_register_test(name)
if (optional)
TestLogger.log_optional_test(qtest_testId)
qtest_prevWhen = when
if (when && !completed && !running)
qtest_run()
}
}