AlkantarClanX12
Your IP : 3.14.251.103
package Encode::MIME::Header;
use strict;
use warnings;
our $VERSION = do { my @r = ( q$Revision: 2.28 $ =~ /\d+/g ); sprintf "%d." . "%02d" x $#r, @r };
use Carp ();
use Encode ();
use MIME::Base64 ();
my %seed = (
decode_b => 1, # decodes 'B' encoding ?
decode_q => 1, # decodes 'Q' encoding ?
encode => 'B', # encode with 'B' or 'Q' ?
charset => 'UTF-8', # encode charset
bpl => 75, # bytes per line
);
my @objs;
push @objs, bless {
%seed,
Name => 'MIME-Header',
} => __PACKAGE__;
push @objs, bless {
%seed,
decode_q => 0,
Name => 'MIME-B',
} => __PACKAGE__;
push @objs, bless {
%seed,
decode_b => 0,
encode => 'Q',
Name => 'MIME-Q',
} => __PACKAGE__;
Encode::define_encoding($_, $_->{Name}) foreach @objs;
use parent qw(Encode::Encoding);
sub needs_lines { 1 }
sub perlio_ok { 0 }
# RFC 2047 and RFC 2231 grammar
my $re_charset = qr/[!"#\$%&'+\-0-9A-Z\\\^_`a-z\{\|\}~]+/;
my $re_language = qr/[A-Za-z]{1,8}(?:-[0-9A-Za-z]{1,8})*/;
my $re_encoding = qr/[QqBb]/;
my $re_encoded_text = qr/[^\?]*/;
my $re_encoded_word = qr/=\?$re_charset(?:\*$re_language)?\?$re_encoding\?$re_encoded_text\?=/;
my $re_capture_encoded_word = qr/=\?($re_charset)((?:\*$re_language)?)\?($re_encoding\?$re_encoded_text)\?=/;
my $re_capture_encoded_word_split = qr/=\?($re_charset)((?:\*$re_language)?)\?($re_encoding)\?($re_encoded_text)\?=/;
# in strict mode check also for valid base64 characters and also for valid quoted printable codes
my $re_encoding_strict_b = qr/[Bb]/;
my $re_encoding_strict_q = qr/[Qq]/;
my $re_encoded_text_strict_b = qr/[0-9A-Za-z\+\/]*={0,2}/;
my $re_encoded_text_strict_q = qr/(?:[\x21-\x3C\x3E\x40-\x7E]|=[0-9A-Fa-f]{2})*/; # NOTE: first part are printable US-ASCII except ?, =, SPACE and TAB
my $re_encoded_word_strict = qr/=\?$re_charset(?:\*$re_language)?\?(?:$re_encoding_strict_b\?$re_encoded_text_strict_b|$re_encoding_strict_q\?$re_encoded_text_strict_q)\?=/;
my $re_capture_encoded_word_strict = qr/=\?($re_charset)((?:\*$re_language)?)\?($re_encoding_strict_b\?$re_encoded_text_strict_b|$re_encoding_strict_q\?$re_encoded_text_strict_q)\?=/;
my $re_newline = qr/(?:\r\n|[\r\n])/;
# in strict mode encoded words must be always separated by spaces or tabs (or folded newline)
# except in comments when separator between words and comment round brackets can be omitted
my $re_word_begin_strict = qr/(?:(?:[ \t]|\A)\(?|(?:[^\\]|\A)\)\()/;
my $re_word_sep_strict = qr/(?:$re_newline?[ \t])+/;
my $re_word_end_strict = qr/(?:\)\(|\)?(?:$re_newline?[ \t]|\z))/;
my $re_match = qr/()((?:$re_encoded_word\s*)*$re_encoded_word)()/;
my $re_match_strict = qr/($re_word_begin_strict)((?:$re_encoded_word_strict$re_word_sep_strict)*$re_encoded_word_strict)(?=$re_word_end_strict)/;
my $re_capture = qr/$re_capture_encoded_word(?:\s*)?/;
my $re_capture_strict = qr/$re_capture_encoded_word_strict$re_word_sep_strict?/;
our $STRICT_DECODE = 0;
sub decode($$;$) {
my ($obj, $str, $chk) = @_;
return undef unless defined $str;
my $re_match_decode = $STRICT_DECODE ? $re_match_strict : $re_match;
my $re_capture_decode = $STRICT_DECODE ? $re_capture_strict : $re_capture;
my $stop = 0;
my $output = substr($str, 0, 0); # to propagate taintedness
# decode each line separately, match whole continuous folded line at one call
1 while not $stop and $str =~ s{^((?:[^\r\n]*(?:$re_newline[ \t])?)*)($re_newline)?}{
my $line = $1;
my $sep = defined $2 ? $2 : '';
$stop = 1 unless length($line) or length($sep);
# NOTE: this code partially could break $chk support
# in non strict mode concat consecutive encoded mime words with same charset, language and encoding
# fixes breaking inside multi-byte characters
1 while not $STRICT_DECODE and $line =~ s/$re_capture_encoded_word_split\s*=\?\1\2\?\3\?($re_encoded_text)\?=/=\?$1$2\?$3\?$4$5\?=/so;
# process sequence of encoded MIME words at once
1 while not $stop and $line =~ s{^(.*?)$re_match_decode}{
my $begin = $1 . $2;
my $words = $3;
$begin =~ tr/\r\n//d;
$output .= $begin;
# decode one MIME word
1 while not $stop and $words =~ s{^(.*?)($re_capture_decode)}{
$output .= $1;
my $orig = $2;
my $charset = $3;
my ($mime_enc, $text) = split /\?/, $5;
$text =~ tr/\r\n//d;
my $enc = Encode::find_mime_encoding($charset);
# in non strict mode allow also perl encoding aliases
if ( not defined $enc and not $STRICT_DECODE ) {
# make sure that decoded string will be always strict UTF-8
$charset = 'UTF-8' if lc($charset) eq 'utf8';
$enc = Encode::find_encoding($charset);
}
if ( not defined $enc ) {
Carp::croak qq(Unknown charset "$charset") if not ref $chk and $chk and $chk & Encode::DIE_ON_ERR;
Carp::carp qq(Unknown charset "$charset") if not ref $chk and $chk and $chk & Encode::WARN_ON_ERR;
$stop = 1 if not ref $chk and $chk and $chk & Encode::RETURN_ON_ERR;
$output .= ($output =~ /(?:\A|[ \t])$/ ? '' : ' ') . $orig unless $stop; # $orig mime word is separated by whitespace
$stop ? $orig : '';
} else {
if ( uc($mime_enc) eq 'B' and $obj->{decode_b} ) {
my $decoded = _decode_b($enc, $text, $chk);
$stop = 1 if not defined $decoded and not ref $chk and $chk and $chk & Encode::RETURN_ON_ERR;
$output .= (defined $decoded ? $decoded : $text) unless $stop;
$stop ? $orig : '';
} elsif ( uc($mime_enc) eq 'Q' and $obj->{decode_q} ) {
my $decoded = _decode_q($enc, $text, $chk);
$stop = 1 if not defined $decoded and not ref $chk and $chk and $chk & Encode::RETURN_ON_ERR;
$output .= (defined $decoded ? $decoded : $text) unless $stop;
$stop ? $orig : '';
} else {
Carp::croak qq(MIME "$mime_enc" unsupported) if not ref $chk and $chk and $chk & Encode::DIE_ON_ERR;
Carp::carp qq(MIME "$mime_enc" unsupported) if not ref $chk and $chk and $chk & Encode::WARN_ON_ERR;
$stop = 1 if not ref $chk and $chk and $chk & Encode::RETURN_ON_ERR;
$output .= ($output =~ /(?:\A|[ \t])$/ ? '' : ' ') . $orig unless $stop; # $orig mime word is separated by whitespace
$stop ? $orig : '';
}
}
}se;
if ( not $stop ) {
$output .= $words;
$words = '';
}
$words;
}se;
if ( not $stop ) {
$line =~ tr/\r\n//d;
$output .= $line . $sep;
$line = '';
$sep = '';
}
$line . $sep;
}se;
$_[1] = $str if not ref $chk and $chk and !($chk & Encode::LEAVE_SRC);
return $output;
}
sub _decode_b {
my ($enc, $text, $chk) = @_;
# MIME::Base64::decode ignores everything after a '=' padding character
# in non strict mode split string after each sequence of padding characters and decode each substring
my $octets = $STRICT_DECODE ?
MIME::Base64::decode($text) :
join('', map { MIME::Base64::decode($_) } split /(?<==)(?=[^=])/, $text);
return _decode_octets($enc, $octets, $chk);
}
sub _decode_q {
my ($enc, $text, $chk) = @_;
$text =~ s/_/ /go;
$text =~ s/=([0-9A-Fa-f]{2})/pack('C', hex($1))/ego;
return _decode_octets($enc, $text, $chk);
}
sub _decode_octets {
my ($enc, $octets, $chk) = @_;
$chk = 0 unless defined $chk;
$chk &= ~Encode::LEAVE_SRC if not ref $chk and $chk;
my $output = $enc->decode($octets, $chk);
return undef if not ref $chk and $chk and $octets ne '';
return $output;
}
sub encode($$;$) {
my ($obj, $str, $chk) = @_;
return undef unless defined $str;
my $output = $obj->_fold_line($obj->_encode_string($str, $chk));
$_[1] = $str if not ref $chk and $chk and !($chk & Encode::LEAVE_SRC);
return $output . substr($str, 0, 0); # to propagate taintedness
}
sub _fold_line {
my ($obj, $line) = @_;
my $bpl = $obj->{bpl};
my $output = '';
while ( length($line) ) {
if ( $line =~ s/^(.{0,$bpl})(\s|\z)// ) {
$output .= $1;
$output .= "\r\n" . $2 if length($line);
} elsif ( $line =~ s/(\s)(.*)$// ) {
$output .= $line;
$line = $2;
$output .= "\r\n" . $1 if length($line);
} else {
$output .= $line;
last;
}
}
return $output;
}
sub _encode_string {
my ($obj, $str, $chk) = @_;
my $wordlen = $obj->{bpl} > 76 ? 76 : $obj->{bpl};
my $enc = Encode::find_mime_encoding($obj->{charset});
my $enc_chk = $chk;
$enc_chk = 0 unless defined $enc_chk;
$enc_chk |= Encode::LEAVE_SRC if not ref $enc_chk and $enc_chk;
my @result = ();
my $octets = '';
while ( length( my $chr = substr($str, 0, 1, '') ) ) {
my $seq = $enc->encode($chr, $enc_chk);
if ( not length($seq) ) {
substr($str, 0, 0, $chr);
last;
}
if ( $obj->_encoded_word_len($octets . $seq) > $wordlen ) {
push @result, $obj->_encode_word($octets);
$octets = '';
}
$octets .= $seq;
}
length($octets) and push @result, $obj->_encode_word($octets);
$_[1] = $str if not ref $chk and $chk and !($chk & Encode::LEAVE_SRC);
return join(' ', @result);
}
sub _encode_word {
my ($obj, $octets) = @_;
my $charset = $obj->{charset};
my $encode = $obj->{encode};
my $text = $encode eq 'B' ? _encode_b($octets) : _encode_q($octets);
return "=?$charset?$encode?$text?=";
}
sub _encoded_word_len {
my ($obj, $octets) = @_;
my $charset = $obj->{charset};
my $encode = $obj->{encode};
my $text_len = $encode eq 'B' ? _encoded_b_len($octets) : _encoded_q_len($octets);
return length("=?$charset?$encode??=") + $text_len;
}
sub _encode_b {
my ($octets) = @_;
return MIME::Base64::encode($octets, '');
}
sub _encoded_b_len {
my ($octets) = @_;
return ( length($octets) + 2 ) / 3 * 4;
}
my $re_invalid_q_char = qr/[^0-9A-Za-z !*+\-\/]/;
sub _encode_q {
my ($octets) = @_;
$octets =~ s{($re_invalid_q_char)}{
join('', map { sprintf('=%02X', $_) } unpack('C*', $1))
}egox;
$octets =~ s/ /_/go;
return $octets;
}
sub _encoded_q_len {
my ($octets) = @_;
my $invalid_count = () = $octets =~ /$re_invalid_q_char/sgo;
return ( $invalid_count * 3 ) + ( length($octets) - $invalid_count );
}
1;
__END__
=head1 NAME
Encode::MIME::Header -- MIME encoding for an unstructured email header
=head1 SYNOPSIS
use Encode qw(encode decode);
my $mime_str = encode("MIME-Header", "Sample:Text \N{U+263A}");
# $mime_str is "=?UTF-8?B?U2FtcGxlOlRleHQg4pi6?="
my $mime_q_str = encode("MIME-Q", "Sample:Text \N{U+263A}");
# $mime_q_str is "=?UTF-8?Q?Sample=3AText_=E2=98=BA?="
my $str = decode("MIME-Header",
"=?ISO-8859-1?B?SWYgeW91IGNhbiByZWFkIHRoaXMgeW8=?=\r\n " .
"=?ISO-8859-2?B?dSB1bmRlcnN0YW5kIHRoZSBleGFtcGxlLg==?="
);
# $str is "If you can read this you understand the example."
use Encode qw(decode :fallbacks);
use Encode::MIME::Header;
local $Encode::MIME::Header::STRICT_DECODE = 1;
my $strict_string = decode("MIME-Header", $mime_string, FB_CROAK);
# use strict decoding and croak on errors
=head1 ABSTRACT
This module implements L<RFC 2047|https://tools.ietf.org/html/rfc2047> MIME
encoding for an unstructured field body of the email header. It can also be
used for L<RFC 822|https://tools.ietf.org/html/rfc822> 'text' token. However,
it cannot be used directly for the whole header with the field name or for the
structured header fields like From, To, Cc, Message-Id, etc... There are 3
encoding names supported by this module: C<MIME-Header>, C<MIME-B> and
C<MIME-Q>.
=head1 DESCRIPTION
Decode method takes an unstructured field body of the email header (or
L<RFC 822|https://tools.ietf.org/html/rfc822> 'text' token) as its input and
decodes each MIME encoded-word from input string to a sequence of bytes
according to L<RFC 2047|https://tools.ietf.org/html/rfc2047> and
L<RFC 2231|https://tools.ietf.org/html/rfc2231>. Subsequently, each sequence
of bytes with the corresponding MIME charset is decoded with
L<the Encode module|Encode> and finally, one output string is returned. Text
parts of the input string which do not contain MIME encoded-word stay
unmodified in the output string. Folded newlines between two consecutive MIME
encoded-words are discarded, others are preserved in the output string.
C<MIME-B> can decode Base64 variant, C<MIME-Q> can decode Quoted-Printable
variant and C<MIME-Header> can decode both of them. If L<Encode module|Encode>
does not support particular MIME charset or chosen variant then an action based
on L<CHECK flags|Encode/Handling Malformed Data> is performed (by default, the
MIME encoded-word is not decoded).
Encode method takes a scalar string as its input and uses
L<strict UTF-8|Encode/UTF-8 vs. utf8 vs. UTF8> encoder for encoding it to UTF-8
bytes. Then a sequence of UTF-8 bytes is encoded into MIME encoded-words
(C<MIME-Header> and C<MIME-B> use a Base64 variant while C<MIME-Q> uses a
Quoted-Printable variant) where each MIME encoded-word is limited to 75
characters. MIME encoded-words are separated by C<CRLF SPACE> and joined to
one output string. Output string is suitable for unstructured field body of
the email header.
Both encode and decode methods propagate
L<CHECK flags|Encode/Handling Malformed Data> when encoding and decoding the
MIME charset.
=head1 BUGS
Versions prior to 2.22 (part of Encode 2.83) have a malfunctioning decoder
and encoder. The MIME encoder infamously inserted additional spaces or
discarded white spaces between consecutive MIME encoded-words, which led to
invalid MIME headers produced by this module. The MIME decoder had a tendency
to discard white spaces, incorrectly interpret data or attempt to decode Base64
MIME encoded-words as Quoted-Printable. These problems were fixed in version
2.22. It is highly recommended not to use any version prior 2.22!
Versions prior to 2.24 (part of Encode 2.87) ignored
L<CHECK flags|Encode/Handling Malformed Data>. The MIME encoder used
L<not strict utf8|Encode/UTF-8 vs. utf8 vs. UTF8> encoder for input Unicode
strings which could lead to invalid UTF-8 sequences. MIME decoder used also
L<not strict utf8|Encode/UTF-8 vs. utf8 vs. UTF8> decoder and additionally
called the decode method with a C<Encode::FB_PERLQQ> flag (thus user-specified
L<CHECK flags|Encode/Handling Malformed Data> were ignored). Moreover, it
automatically croaked when a MIME encoded-word contained unknown encoding.
Since version 2.24, this module uses
L<strict UTF-8|Encode/UTF-8 vs. utf8 vs. UTF8> encoder and decoder. And
L<CHECK flags|Encode/Handling Malformed Data> are correctly propagated.
Since version 2.22 (part of Encode 2.83), the MIME encoder should be fully
compliant to L<RFC 2047|https://tools.ietf.org/html/rfc2047> and
L<RFC 2231|https://tools.ietf.org/html/rfc2231>. Due to the aforementioned
bugs in previous versions of the MIME encoder, there is a I<less strict>
compatible mode for the MIME decoder which is used by default. It should be
able to decode MIME encoded-words encoded by pre 2.22 versions of this module.
However, note that this is not correct according to
L<RFC 2047|https://tools.ietf.org/html/rfc2047>.
In default I<not strict> mode the MIME decoder attempts to decode every substring
which looks like a MIME encoded-word. Therefore, the MIME encoded-words do not
need to be separated by white space. To enforce a correct I<strict> mode, set
variable C<$Encode::MIME::Header::STRICT_DECODE> to 1 e.g. by localizing:
use Encode::MIME::Header;
local $Encode::MIME::Header::STRICT_DECODE = 1;
=head1 AUTHORS
Pali E<lt>pali@cpan.orgE<gt>
=head1 SEE ALSO
L<Encode>,
L<RFC 822|https://tools.ietf.org/html/rfc822>,
L<RFC 2047|https://tools.ietf.org/html/rfc2047>,
L<RFC 2231|https://tools.ietf.org/html/rfc2231>
=cut