AlkantarClanX12
Your IP : 3.144.41.200
/* Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2 of the License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1335 USA */
#ifndef REPLICATION_H
#define REPLICATION_H
/***************************************************************************
NOTE: plugin locking.
The plugin is locked on Binlog_transmit_observer::transmit_start and is
unlocked after Binlog_transmit_observer::transmit_stop. All other
master observable events happen between these two and don't lock the
plugin at all.
Also a plugin is locked on Binlog_relay_IO_observer::thread_start
and unlocked after Binlog_relay_IO_observer::thread_stop.
***************************************************************************/
#include <mysql.h>
typedef struct st_mysql MYSQL;
#ifdef __cplusplus
extern "C" {
#endif
/**
Transaction observer flags.
*/
enum Trans_flags {
/** Transaction is a real transaction */
TRANS_IS_REAL_TRANS = 1
};
/**
Transaction observer parameter
*/
typedef struct Trans_param {
uint32 server_id;
uint32 flags;
/*
The latest binary log file name and position written by current
transaction, if binary log is disabled or no log event has been
written into binary log file by current transaction (events
written into transaction log cache are not counted), these two
member will be zero.
*/
const char *log_file;
my_off_t log_pos;
} Trans_param;
/**
Observes and extends transaction execution
*/
typedef struct Trans_observer {
uint32 len;
/**
This callback is called after transaction commit
This callback is called right after commit to storage engines for
transactional tables.
For non-transactional tables, this is called at the end of the
statement, before sending statement status, if the statement
succeeded.
@note The return value is currently ignored by the server.
@note This hook is called wo/ any global mutex held
@param param The parameter for transaction observers
@retval 0 Sucess
@retval 1 Failure
*/
int (*after_commit)(Trans_param *param);
/**
This callback is called after transaction rollback
This callback is called right after rollback to storage engines
for transactional tables.
For non-transactional tables, this is called at the end of the
statement, before sending statement status, if the statement
failed.
@note The return value is currently ignored by the server.
@param param The parameter for transaction observers
@note This hook is called wo/ any global mutex held
@retval 0 Sucess
@retval 1 Failure
*/
int (*after_rollback)(Trans_param *param);
} Trans_observer;
/**
Binlog storage flags
*/
enum Binlog_storage_flags {
/** Binary log was sync:ed */
BINLOG_STORAGE_IS_SYNCED = 1,
/** First(or alone) in a group commit */
BINLOG_GROUP_COMMIT_LEADER = 2,
/** Last(or alone) in a group commit */
BINLOG_GROUP_COMMIT_TRAILER = 4
};
/**
Binlog storage observer parameters
*/
typedef struct Binlog_storage_param {
uint32 server_id;
} Binlog_storage_param;
/**
Observe binlog logging storage
*/
typedef struct Binlog_storage_observer {
uint32 len;
/**
This callback is called after binlog has been flushed
This callback is called after cached events have been flushed to
binary log file. Whether the binary log file is synchronized to
disk is indicated by the bit BINLOG_STORAGE_IS_SYNCED in @a flags.
@note: this hook is called with LOCK_log mutex held
@param param Observer common parameter
@param log_file Binlog file name been updated
@param log_pos Binlog position after update
@param flags flags for binlog storage
@retval 0 Sucess
@retval 1 Failure
*/
int (*after_flush)(Binlog_storage_param *param,
const char *log_file, my_off_t log_pos,
uint32 flags);
/**
This callback is called after binlog has been synced
This callback is called after events flushed to disk has been sync:ed
("group committed").
@note: this hook is called with LOCK_after_binlog_sync mutex held
@param param Observer common parameter
@param log_file Binlog file name been updated
@param log_pos Binlog position after update
@param flags flags for binlog storage
@retval 0 Sucess
@retval 1 Failure
*/
int (*after_sync)(Binlog_storage_param *param,
const char *log_file, my_off_t log_pos,
uint32 flags);
} Binlog_storage_observer;
/**
Replication binlog transmitter (binlog dump) observer parameter.
*/
typedef struct Binlog_transmit_param {
uint32 server_id;
uint32 flags;
} Binlog_transmit_param;
/**
Observe and extends the binlog dumping thread.
*/
typedef struct Binlog_transmit_observer {
uint32 len;
/**
This callback is called when binlog dumping starts
@param param Observer common parameter
@param log_file Binlog file name to transmit from
@param log_pos Binlog position to transmit from
@retval 0 Sucess
@retval 1 Failure
*/
int (*transmit_start)(Binlog_transmit_param *param,
const char *log_file, my_off_t log_pos);
/**
This callback is called when binlog dumping stops
@param param Observer common parameter
@retval 0 Sucess
@retval 1 Failure
*/
int (*transmit_stop)(Binlog_transmit_param *param);
/**
This callback is called to reserve bytes in packet header for event transmission
This callback is called when resetting transmit packet header to
reserve bytes for this observer in packet header.
The @a header buffer is allocated by the server code, and @a size
is the size of the header buffer. Each observer can only reserve
a maximum size of @a size in the header.
@param param Observer common parameter
@param header Pointer of the header buffer
@param size Size of the header buffer
@param len Header length reserved by this observer
@retval 0 Sucess
@retval 1 Failure
*/
int (*reserve_header)(Binlog_transmit_param *param,
unsigned char *header,
unsigned long size,
unsigned long *len);
/**
This callback is called before sending an event packet to slave
@param param Observer common parameter
@param packet Binlog event packet to send
@param len Length of the event packet
@param log_file Binlog file name of the event packet to send
@param log_pos Binlog position of the event packet to send
@retval 0 Sucess
@retval 1 Failure
*/
int (*before_send_event)(Binlog_transmit_param *param,
unsigned char *packet, unsigned long len,
const char *log_file, my_off_t log_pos );
/**
This callback is called after sending an event packet to slave
@param param Observer common parameter
@param event_buf Binlog event packet buffer sent
@param len length of the event packet buffer
@retval 0 Sucess
@retval 1 Failure
*/
int (*after_send_event)(Binlog_transmit_param *param,
const char *event_buf, unsigned long len);
/**
This callback is called after resetting master status
This is called when executing the command RESET MASTER, and is
used to reset status variables added by observers.
@param param Observer common parameter
@retval 0 Sucess
@retval 1 Failure
*/
int (*after_reset_master)(Binlog_transmit_param *param);
} Binlog_transmit_observer;
/**
Binlog relay IO flags
*/
enum Binlog_relay_IO_flags {
/** Binary relay log was sync:ed */
BINLOG_RELAY_IS_SYNCED = 1
};
/**
Replication binlog relay IO observer parameter
*/
typedef struct Binlog_relay_IO_param {
uint32 server_id;
/* Master host, user and port */
char *host;
char *user;
unsigned int port;
char *master_log_name;
my_off_t master_log_pos;
MYSQL *mysql; /* the connection to master */
} Binlog_relay_IO_param;
/**
Observes and extends the service of slave IO thread.
*/
typedef struct Binlog_relay_IO_observer {
uint32 len;
/**
This callback is called when slave IO thread starts
@param param Observer common parameter
@retval 0 Sucess
@retval 1 Failure
*/
int (*thread_start)(Binlog_relay_IO_param *param);
/**
This callback is called when slave IO thread stops
@param param Observer common parameter
@retval 0 Sucess
@retval 1 Failure
*/
int (*thread_stop)(Binlog_relay_IO_param *param);
/**
This callback is called before slave requesting binlog transmission from master
This is called before slave issuing BINLOG_DUMP command to master
to request binlog.
@param param Observer common parameter
@param flags binlog dump flags
@retval 0 Sucess
@retval 1 Failure
*/
int (*before_request_transmit)(Binlog_relay_IO_param *param, uint32 flags);
/**
This callback is called after read an event packet from master
@param param Observer common parameter
@param packet The event packet read from master
@param len Length of the event packet read from master
@param event_buf The event packet return after process
@param event_len The length of event packet return after process
@retval 0 Sucess
@retval 1 Failure
*/
int (*after_read_event)(Binlog_relay_IO_param *param,
const char *packet, unsigned long len,
const char **event_buf, unsigned long *event_len);
/**
This callback is called after written an event packet to relay log
@param param Observer common parameter
@param event_buf Event packet written to relay log
@param event_len Length of the event packet written to relay log
@param flags flags for relay log
@retval 0 Sucess
@retval 1 Failure
*/
int (*after_queue_event)(Binlog_relay_IO_param *param,
const char *event_buf, unsigned long event_len,
uint32 flags);
/**
This callback is called after reset slave relay log IO status
@param param Observer common parameter
@retval 0 Sucess
@retval 1 Failure
*/
int (*after_reset_slave)(Binlog_relay_IO_param *param);
} Binlog_relay_IO_observer;
/**
Register a transaction observer
@param observer The transaction observer to register
@param p pointer to the internal plugin structure
@retval 0 Sucess
@retval 1 Observer already exists
*/
int register_trans_observer(Trans_observer *observer, void *p);
/**
Unregister a transaction observer
@param observer The transaction observer to unregister
@param p pointer to the internal plugin structure
@retval 0 Sucess
@retval 1 Observer not exists
*/
int unregister_trans_observer(Trans_observer *observer, void *p);
/**
Register a binlog storage observer
@param observer The binlog storage observer to register
@param p pointer to the internal plugin structure
@retval 0 Sucess
@retval 1 Observer already exists
*/
int register_binlog_storage_observer(Binlog_storage_observer *observer, void *p);
/**
Unregister a binlog storage observer
@param observer The binlog storage observer to unregister
@param p pointer to the internal plugin structure
@retval 0 Sucess
@retval 1 Observer not exists
*/
int unregister_binlog_storage_observer(Binlog_storage_observer *observer, void *p);
/**
Register a binlog transmit observer
@param observer The binlog transmit observer to register
@param p pointer to the internal plugin structure
@retval 0 Sucess
@retval 1 Observer already exists
*/
int register_binlog_transmit_observer(Binlog_transmit_observer *observer, void *p);
/**
Unregister a binlog transmit observer
@param observer The binlog transmit observer to unregister
@param p pointer to the internal plugin structure
@retval 0 Sucess
@retval 1 Observer not exists
*/
int unregister_binlog_transmit_observer(Binlog_transmit_observer *observer, void *p);
/**
Register a binlog relay IO (slave IO thread) observer
@param observer The binlog relay IO observer to register
@param p pointer to the internal plugin structure
@retval 0 Sucess
@retval 1 Observer already exists
*/
int register_binlog_relay_io_observer(Binlog_relay_IO_observer *observer, void *p);
/**
Unregister a binlog relay IO (slave IO thread) observer
@param observer The binlog relay IO observer to unregister
@param p pointer to the internal plugin structure
@retval 0 Sucess
@retval 1 Observer not exists
*/
int unregister_binlog_relay_io_observer(Binlog_relay_IO_observer *observer, void *p);
/**
Connect to master
This function can only used in the slave I/O thread context, and
will use the same master information to do the connection.
@code
MYSQL *mysql = mysql_init(NULL);
if (rpl_connect_master(mysql))
{
// do stuff with the connection
}
mysql_close(mysql); // close the connection
@endcode
@param mysql address of MYSQL structure to use, pass NULL will
create a new one
@return address of MYSQL structure on success, NULL on failure
*/
MYSQL *rpl_connect_master(MYSQL *mysql);
/**
Get the value of user variable as an integer.
This function will return the value of variable @a name as an
integer. If the original value of the variable is not an integer,
the value will be converted into an integer.
@param name user variable name
@param value pointer to return the value
@param null_value if not NULL, the function will set it to true if
the value of variable is null, set to false if not
@retval 0 Success
@retval 1 Variable not found
*/
int get_user_var_int(const char *name,
long long int *value, int *null_value);
/**
Get the value of user variable as a double precision float number.
This function will return the value of variable @a name as real
number. If the original value of the variable is not a real number,
the value will be converted into a real number.
@param name user variable name
@param value pointer to return the value
@param null_value if not NULL, the function will set it to true if
the value of variable is null, set to false if not
@retval 0 Success
@retval 1 Variable not found
*/
int get_user_var_real(const char *name,
double *value, int *null_value);
/**
Get the value of user variable as a string.
This function will return the value of variable @a name as
string. If the original value of the variable is not a string,
the value will be converted into a string.
@param name user variable name
@param value pointer to the value buffer
@param len length of the value buffer
@param precision precision of the value if it is a float number
@param null_value if not NULL, the function will set it to true if
the value of variable is null, set to false if not
@retval 0 Success
@retval 1 Variable not found
*/
int get_user_var_str(const char *name,
char *value, unsigned long len,
unsigned int precision, int *null_value);
#ifdef __cplusplus
}
#endif
#endif /* REPLICATION_H */