AlkantarClanX12
Your IP : 3.144.123.24
SNMP-TARGET-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
snmpModules,
Counter32,
Integer32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
TDomain,
TAddress,
TimeInterval,
RowStatus,
StorageType,
TestAndIncr
FROM SNMPv2-TC
SnmpSecurityModel,
SnmpMessageProcessingModel,
SnmpSecurityLevel,
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF;
snmpTargetMIB MODULE-IDENTITY
LAST-UPDATED "200210140000Z"
ORGANIZATION "IETF SNMPv3 Working Group"
CONTACT-INFO
"WG-email: snmpv3@lists.tislabs.com
Subscribe: majordomo@lists.tislabs.com
In message body: subscribe snmpv3
Co-Chair: Russ Mundy
Network Associates Laboratories
Postal: 15204 Omega Drive, Suite 300
Rockville, MD 20850-4601
USA
EMail: mundy@tislabs.com
Phone: +1 301-947-7107
Co-Chair: David Harrington
Enterasys Networks
Postal: 35 Industrial Way
P. O. Box 5004
Rochester, New Hampshire 03866-5005
USA
EMail: dbh@enterasys.com
Phone: +1 603-337-2614
Co-editor: David B. Levi
Nortel Networks
Postal: 3505 Kesterwood Drive
Knoxville, Tennessee 37918
EMail: dlevi@nortelnetworks.com
Phone: +1 865 686 0432
Co-editor: Paul Meyer
Secure Computing Corporation
Postal: 2675 Long Lake Road
Roseville, Minnesota 55113
EMail: paul_meyer@securecomputing.com
Phone: +1 651 628 1592
Co-editor: Bob Stewart
Retired"
DESCRIPTION
"This MIB module defines MIB objects which provide
mechanisms to remotely configure the parameters used
by an SNMP entity for the generation of SNMP messages.
Copyright (C) The Internet Society (2002). This
version of this MIB module is part of RFC 3413;
see the RFC itself for full legal notices.
"
REVISION "200210140000Z" -- 14 October 2002
DESCRIPTION "Fixed DISPLAY-HINTS for UTF-8 strings, fixed hex
value of LF characters, clarified meaning of zero
length tag values, improved tag list examples.
Published as RFC 3413."
REVISION "199808040000Z" -- 4 August 1998
DESCRIPTION "Clarifications, published as
RFC 2573."
REVISION "199707140000Z" -- 14 July 1997
DESCRIPTION "The initial revision, published as RFC2273."
::= { snmpModules 12 }
snmpTargetObjects OBJECT IDENTIFIER ::= { snmpTargetMIB 1 }
snmpTargetConformance OBJECT IDENTIFIER ::= { snmpTargetMIB 3 }
SnmpTagValue ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255t"
STATUS current
DESCRIPTION
"An octet string containing a tag value.
Tag values are preferably in human-readable form.
To facilitate internationalization, this information
is represented using the ISO/IEC IS 10646-1 character
set, encoded as an octet string using the UTF-8
character encoding scheme described in RFC 2279.
Since additional code points are added by amendments
to the 10646 standard from time to time,
implementations must be prepared to encounter any code
point from 0x00000000 to 0x7fffffff.
The use of control codes should be avoided, and certain
control codes are not allowed as described below.
For code points not directly supported by user
interface hardware or software, an alternative means
of entry and display, such as hexadecimal, may be
provided.
For information encoded in 7-bit US-ASCII, the UTF-8
representation is identical to the US-ASCII encoding.
Note that when this TC is used for an object that
is used or envisioned to be used as an index, then a
SIZE restriction must be specified so that the number
of sub-identifiers for any object instance does not
exceed the limit of 128, as defined by [RFC1905].
An object of this type contains a single tag value
which is used to select a set of entries in a table.
A tag value is an arbitrary string of octets, but
may not contain a delimiter character. Delimiter
characters are defined to be one of the following:
- An ASCII space character (0x20).
- An ASCII TAB character (0x09).
- An ASCII carriage return (CR) character (0x0D).
- An ASCII line feed (LF) character (0x0A).
Delimiter characters are used to separate tag values
in a tag list. An object of this type may only
contain a single tag value, and so delimiter
characters are not allowed in a value of this type.
Note that a tag value of 0 length means that no tag is
defined. In other words, a tag value of 0 length would
never match anything in a tag list, and would never
select any table entries.
Some examples of valid tag values are:
- 'acme'
- 'router'
- 'host'
The use of a tag value to select table entries is
application and MIB specific."
SYNTAX OCTET STRING (SIZE (0..255))
SnmpTagList ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255t"
STATUS current
DESCRIPTION
"An octet string containing a list of tag values.
Tag values are preferably in human-readable form.
To facilitate internationalization, this information
is represented using the ISO/IEC IS 10646-1 character
set, encoded as an octet string using the UTF-8
character encoding scheme described in RFC 2279.
Since additional code points are added by amendments
to the 10646 standard from time to time,
implementations must be prepared to encounter any code
point from 0x00000000 to 0x7fffffff.
The use of control codes should be avoided, except as
described below.
For code points not directly supported by user
interface hardware or software, an alternative means
of entry and display, such as hexadecimal, may be
provided.
For information encoded in 7-bit US-ASCII, the UTF-8
representation is identical to the US-ASCII encoding.
An object of this type contains a list of tag values
which are used to select a set of entries in a table.
A tag value is an arbitrary string of octets, but
may not contain a delimiter character. Delimiter
characters are defined to be one of the following:
- An ASCII space character (0x20).
- An ASCII TAB character (0x09).
- An ASCII carriage return (CR) character (0x0D).
- An ASCII line feed (LF) character (0x0A).
Delimiter characters are used to separate tag values
in a tag list. Only a single delimiter character may
occur between two tag values. A tag value may not
have a zero length. These constraints imply certain
restrictions on the contents of this object:
- There cannot be a leading or trailing delimiter
character.
- There cannot be multiple adjacent delimiter
characters.
Some examples of valid tag lists are:
- '' -- an empty list
- 'acme' -- list of one tag
- 'host router bridge' -- list of several tags
Note that although a tag value may not have a length of
zero, an empty string is still valid. This indicates
an empty list (i.e. there are no tag values in the list).
The use of the tag list to select table entries is
application and MIB specific. Typically, an application
will provide one or more tag values, and any entry
which contains some combination of these tag values
will be selected."
SYNTAX OCTET STRING (SIZE (0..255))
--
--
-- The snmpTargetObjects group
--
--
snmpTargetSpinLock OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to facilitate modification of table
entries in the SNMP-TARGET-MIB module by multiple
managers. In particular, it is useful when modifying
the value of the snmpTargetAddrTagList object.
The procedure for modifying the snmpTargetAddrTagList
object is as follows:
1. Retrieve the value of snmpTargetSpinLock and
of snmpTargetAddrTagList.
2. Generate a new value for snmpTargetAddrTagList.
3. Set the value of snmpTargetSpinLock to the
retrieved value, and the value of
snmpTargetAddrTagList to the new value. If
the set fails for the snmpTargetSpinLock
object, go back to step 1."
::= { snmpTargetObjects 1 }
snmpTargetAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTargetAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of transport addresses to be used in the generation
of SNMP messages."
::= { snmpTargetObjects 2 }
snmpTargetAddrEntry OBJECT-TYPE
SYNTAX SnmpTargetAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A transport address to be used in the generation
of SNMP operations.
Entries in the snmpTargetAddrTable are created and
deleted using the snmpTargetAddrRowStatus object."
INDEX { IMPLIED snmpTargetAddrName }
::= { snmpTargetAddrTable 1 }
SnmpTargetAddrEntry ::= SEQUENCE {
snmpTargetAddrName SnmpAdminString,
snmpTargetAddrTDomain TDomain,
snmpTargetAddrTAddress TAddress,
snmpTargetAddrTimeout TimeInterval,
snmpTargetAddrRetryCount Integer32,
snmpTargetAddrTagList SnmpTagList,
snmpTargetAddrParams SnmpAdminString,
snmpTargetAddrStorageType StorageType,
snmpTargetAddrRowStatus RowStatus
}
snmpTargetAddrName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The locally arbitrary, but unique identifier associated
with this snmpTargetAddrEntry."
::= { snmpTargetAddrEntry 1 }
snmpTargetAddrTDomain OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the transport type of the address
contained in the snmpTargetAddrTAddress object."
::= { snmpTargetAddrEntry 2 }
snmpTargetAddrTAddress OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains a transport address. The format of
this address depends on the value of the
snmpTargetAddrTDomain object."
::= { snmpTargetAddrEntry 3 }
snmpTargetAddrTimeout OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object should reflect the expected maximum round
trip time for communicating with the transport address
defined by this row. When a message is sent to this
address, and a response (if one is expected) is not
received within this time period, an implementation
may assume that the response will not be delivered.
Note that the time interval that an application waits
for a response may actually be derived from the value
of this object. The method for deriving the actual time
interval is implementation dependent. One such method
is to derive the expected round trip time based on a
particular retransmission algorithm and on the number
of timeouts which have occurred. The type of message may
also be considered when deriving expected round trip
times for retransmissions. For example, if a message is
being sent with a securityLevel that indicates both
authentication and privacy, the derived value may be
increased to compensate for extra processing time spent
during authentication and encryption processing."
DEFVAL { 1500 }
::= { snmpTargetAddrEntry 4 }
snmpTargetAddrRetryCount OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies a default number of retries to be
attempted when a response is not received for a generated
message. An application may provide its own retry count,
in which case the value of this object is ignored."
DEFVAL { 3 }
::= { snmpTargetAddrEntry 5 }
snmpTargetAddrTagList OBJECT-TYPE
SYNTAX SnmpTagList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains a list of tag values which are
used to select target addresses for a particular
operation."
DEFVAL { "" }
::= { snmpTargetAddrEntry 6 }
snmpTargetAddrParams OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies an entry in the
snmpTargetParamsTable. The identified entry
contains SNMP parameters to be used when generating
messages to be sent to this transport address."
::= { snmpTargetAddrEntry 7 }
snmpTargetAddrStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { snmpTargetAddrEntry 8 }
snmpTargetAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the snmpTargetAddrRowStatus
column is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding instances of
snmpTargetAddrTDomain, snmpTargetAddrTAddress, and
snmpTargetAddrParams have all been set.
The following objects may not be modified while the
value of this object is active(1):
- snmpTargetAddrTDomain
- snmpTargetAddrTAddress
An attempt to set these objects while the value of
snmpTargetAddrRowStatus is active(1) will result in
an inconsistentValue error."
::= { snmpTargetAddrEntry 9 }
snmpTargetParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTargetParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of SNMP target information to be used
in the generation of SNMP messages."
::= { snmpTargetObjects 3 }
snmpTargetParamsEntry OBJECT-TYPE
SYNTAX SnmpTargetParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of SNMP target information.
Entries in the snmpTargetParamsTable are created and
deleted using the snmpTargetParamsRowStatus object."
INDEX { IMPLIED snmpTargetParamsName }
::= { snmpTargetParamsTable 1 }
SnmpTargetParamsEntry ::= SEQUENCE {
snmpTargetParamsName SnmpAdminString,
snmpTargetParamsMPModel SnmpMessageProcessingModel,
snmpTargetParamsSecurityModel SnmpSecurityModel,
snmpTargetParamsSecurityName SnmpAdminString,
snmpTargetParamsSecurityLevel SnmpSecurityLevel,
snmpTargetParamsStorageType StorageType,
snmpTargetParamsRowStatus RowStatus
}
snmpTargetParamsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The locally arbitrary, but unique identifier associated
with this snmpTargetParamsEntry."
::= { snmpTargetParamsEntry 1 }
snmpTargetParamsMPModel OBJECT-TYPE
SYNTAX SnmpMessageProcessingModel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Message Processing Model to be used when generating
SNMP messages using this entry."
::= { snmpTargetParamsEntry 2 }
snmpTargetParamsSecurityModel OBJECT-TYPE
SYNTAX SnmpSecurityModel (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Security Model to be used when generating SNMP
messages using this entry. An implementation may
choose to return an inconsistentValue error if an
attempt is made to set this variable to a value
for a security model which the implementation does
not support."
::= { snmpTargetParamsEntry 3 }
snmpTargetParamsSecurityName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The securityName which identifies the Principal on
whose behalf SNMP messages will be generated using
this entry."
::= { snmpTargetParamsEntry 4 }
snmpTargetParamsSecurityLevel OBJECT-TYPE
SYNTAX SnmpSecurityLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Level of Security to be used when generating
SNMP messages using this entry."
::= { snmpTargetParamsEntry 5 }
snmpTargetParamsStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { snmpTargetParamsEntry 6 }
snmpTargetParamsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the snmpTargetParamsRowStatus
column is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding
snmpTargetParamsMPModel,
snmpTargetParamsSecurityModel,
snmpTargetParamsSecurityName,
and snmpTargetParamsSecurityLevel have all been set.
The following objects may not be modified while the
value of this object is active(1):
- snmpTargetParamsMPModel
- snmpTargetParamsSecurityModel
- snmpTargetParamsSecurityName
- snmpTargetParamsSecurityLevel
An attempt to set these objects while the value of
snmpTargetParamsRowStatus is active(1) will result in
an inconsistentValue error."
::= { snmpTargetParamsEntry 7 }
snmpUnavailableContexts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by the SNMP
engine which were dropped because the context
contained in the message was unavailable."
::= { snmpTargetObjects 4 }
snmpUnknownContexts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by the SNMP
engine which were dropped because the context
contained in the message was unknown."
::= { snmpTargetObjects 5 }
--
--
-- Conformance information
--
--
snmpTargetCompliances OBJECT IDENTIFIER ::=
{ snmpTargetConformance 1 }
snmpTargetGroups OBJECT IDENTIFIER ::=
{ snmpTargetConformance 2 }
--
--
-- Compliance statements
--
--
snmpTargetCommandResponderCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which include
a command responder application."
MODULE -- This Module
MANDATORY-GROUPS { snmpTargetCommandResponderGroup }
::= { snmpTargetCompliances 1 }
snmpTargetBasicGroup OBJECT-GROUP
OBJECTS {
snmpTargetSpinLock,
snmpTargetAddrTDomain,
snmpTargetAddrTAddress,
snmpTargetAddrTagList,
snmpTargetAddrParams,
snmpTargetAddrStorageType,
snmpTargetAddrRowStatus,
snmpTargetParamsMPModel,
snmpTargetParamsSecurityModel,
snmpTargetParamsSecurityName,
snmpTargetParamsSecurityLevel,
snmpTargetParamsStorageType,
snmpTargetParamsRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing basic remote
configuration of management targets."
::= { snmpTargetGroups 1 }
snmpTargetResponseGroup OBJECT-GROUP
OBJECTS {
snmpTargetAddrTimeout,
snmpTargetAddrRetryCount
}
STATUS current
DESCRIPTION
"A collection of objects providing remote configuration
of management targets for applications which generate
SNMP messages for which a response message would be
expected."
::= { snmpTargetGroups 2 }
snmpTargetCommandResponderGroup OBJECT-GROUP
OBJECTS {
snmpUnavailableContexts,
snmpUnknownContexts
}
STATUS current
DESCRIPTION
"A collection of objects required for command responder
applications, used for counting error conditions."
::= { snmpTargetGroups 3 }
END