AlkantarClanX12
Your IP : 3.145.109.244
" Vim indent file
" Language: Erlang (http://www.erlang.org)
" Author: Csaba Hoch <csaba.hoch@gmail.com>
" Contributors: Edwin Fine <efine145_nospam01 at usa dot net>
" Pawel 'kTT' Salata <rockplayer.pl@gmail.com>
" Ricardo Catalinas Jiménez <jimenezrick@gmail.com>
" Last Update: 2013-Jul-21
" License: Vim license
" URL: https://github.com/hcs42/vim-erlang
" Note About Usage:
" This indentation script works best with the Erlang syntax file created by
" Kreąimir Marľić (Kresimir Marzic) and maintained by Csaba Hoch.
" Notes About Implementation:
"
" - LTI = Line to indent.
" - The index of the first line is 1, but the index of the first column is 0.
" Initialization {{{1
" ==============
" Only load this indent file when no other was loaded
" Vim 7 or later is needed
if exists("b:did_indent") || version < 700
finish
else
let b:did_indent = 1
endif
setlocal indentexpr=ErlangIndent()
setlocal indentkeys+=0=end,0=of,0=catch,0=after,0=when,0=),0=],0=},0=>>
" Only define the functions once
if exists("*ErlangIndent")
finish
endif
let s:cpo_save = &cpo
set cpo&vim
" Logging library {{{1
" ===============
" Purpose:
" Logs the given string using the ErlangIndentLog function if it exists.
" Parameters:
" s: string
function! s:Log(s)
if exists("*ErlangIndentLog")
call ErlangIndentLog(a:s)
endif
endfunction
" Line tokenizer library {{{1
" ======================
" Indtokens are "indentation tokens".
" Purpose:
" Calculate the new virtual column after the given segment of a line.
" Parameters:
" line: string
" first_index: integer -- the index of the first character of the segment
" last_index: integer -- the index of the last character of the segment
" vcol: integer -- the virtual column of the first character of the token
" tabstop: integer -- the value of the 'tabstop' option to be used
" Returns:
" vcol: integer
" Example:
" " index: 0 12 34567
" " vcol: 0 45 89
" s:CalcVCol("\t'\tx', b", 1, 4, 4) -> 10
function! s:CalcVCol(line, first_index, last_index, vcol, tabstop)
" We copy the relevent segment of the line, otherwise if the line were
" e.g. `"\t", term` then the else branch below would consume the `", term`
" part at once.
let line = a:line[a:first_index : a:last_index]
let i = 0
let last_index = a:last_index - a:first_index
let vcol = a:vcol
while 0 <= i && i <= last_index
if line[i] ==# "\t"
" Example (when tabstop == 4):
"
" vcol + tab -> next_vcol
" 0 + tab -> 4
" 1 + tab -> 4
" 2 + tab -> 4
" 3 + tab -> 4
" 4 + tab -> 8
"
" next_i - i == the number of tabs
let next_i = matchend(line, '\t*', i + 1)
let vcol = (vcol / a:tabstop + (next_i - i)) * a:tabstop
call s:Log('new vcol after tab: '. vcol)
else
let next_i = matchend(line, '[^\t]*', i + 1)
let vcol += next_i - i
call s:Log('new vcol after other: '. vcol)
endif
let i = next_i
endwhile
return vcol
endfunction
" Purpose:
" Go through the whole line and return the tokens in the line.
" Parameters:
" line: string -- the line to be examined
" string_continuation: bool
" atom_continuation: bool
" Returns:
" indtokens = [indtoken]
" indtoken = [token, vcol, col]
" token = string (examples: 'begin', '<variable>', '}')
" vcol = integer (the virtual column of the first character of the token)
" col = integer
function! s:GetTokensFromLine(line, string_continuation, atom_continuation,
\tabstop)
let linelen = strlen(a:line) " The length of the line
let i = 0 " The index of the current character in the line
let vcol = 0 " The virtual column of the current character
let indtokens = []
if a:string_continuation
let i = matchend(a:line, '^\%([^"\\]\|\\.\)*"', 0)
if i ==# -1
call s:Log(' Whole line is string continuation -> ignore')
return []
else
let vcol = s:CalcVCol(a:line, 0, i - 1, 0, a:tabstop)
call add(indtokens, ['<string_end>', vcol, i])
endif
elseif a:atom_continuation
let i = matchend(a:line, "^\\%([^'\\\\]\\|\\\\.\\)*'", 0)
if i ==# -1
call s:Log(' Whole line is quoted atom continuation -> ignore')
return []
else
let vcol = s:CalcVCol(a:line, 0, i - 1, 0, a:tabstop)
call add(indtokens, ['<quoted_atom_end>', vcol, i])
endif
endif
while 0 <= i && i < linelen
let next_vcol = ''
" Spaces
if a:line[i] ==# ' '
let next_i = matchend(a:line, ' *', i + 1)
" Tabs
elseif a:line[i] ==# "\t"
let next_i = matchend(a:line, '\t*', i + 1)
" See example in s:CalcVCol
let next_vcol = (vcol / a:tabstop + (next_i - i)) * a:tabstop
" Comment
elseif a:line[i] ==# '%'
let next_i = linelen
" String token: "..."
elseif a:line[i] ==# '"'
let next_i = matchend(a:line, '\%([^"\\]\|\\.\)*"', i + 1)
if next_i ==# -1
call add(indtokens, ['<string_start>', vcol, i])
else
let next_vcol = s:CalcVCol(a:line, i, next_i - 1, vcol, a:tabstop)
call add(indtokens, ['<string>', vcol, i])
endif
" Quoted atom token: '...'
elseif a:line[i] ==# "'"
let next_i = matchend(a:line, "\\%([^'\\\\]\\|\\\\.\\)*'", i + 1)
if next_i ==# -1
call add(indtokens, ['<quoted_atom_start>', vcol, i])
else
let next_vcol = s:CalcVCol(a:line, i, next_i - 1, vcol, a:tabstop)
call add(indtokens, ['<quoted_atom>', vcol, i])
endif
" Keyword or atom or variable token or number
elseif a:line[i] =~# '[a-zA-Z_@0-9]'
let next_i = matchend(a:line,
\'[[:alnum:]_@:]*\%(\s*#\s*[[:alnum:]_@:]*\)\=',
\i + 1)
call add(indtokens, [a:line[(i):(next_i - 1)], vcol, i])
" Character token: $<char> (as in: $a)
elseif a:line[i] ==# '$'
call add(indtokens, ['$.', vcol, i])
let next_i = i + 2
" Dot token: .
elseif a:line[i] ==# '.'
let next_i = i + 1
if i + 1 ==# linelen || a:line[i + 1] =~# '[[:blank:]%]'
" End of clause token: . (as in: f() -> ok.)
call add(indtokens, ['<end_of_clause>', vcol, i])
else
" Possibilities:
" - Dot token in float: . (as in: 3.14)
" - Dot token in record: . (as in: #myrec.myfield)
call add(indtokens, ['.', vcol, i])
endif
" Equal sign
elseif a:line[i] ==# '='
" This is handled separately so that "=<<" will be parsed as
" ['=', '<<'] instead of ['=<', '<']. Although Erlang parses it
" currently in the latter way, that may be fixed some day.
call add(indtokens, [a:line[i], vcol, i])
let next_i = i + 1
" Three-character tokens
elseif i + 1 < linelen &&
\ index(['=:=', '=/='], a:line[i : i + 1]) != -1
call add(indtokens, [a:line[i : i + 1], vcol, i])
let next_i = i + 2
" Two-character tokens
elseif i + 1 < linelen &&
\ index(['->', '<<', '>>', '||', '==', '/=', '=<', '>=', '++', '--',
\ '::'],
\ a:line[i : i + 1]) != -1
call add(indtokens, [a:line[i : i + 1], vcol, i])
let next_i = i + 2
" Other character: , ; < > ( ) [ ] { } # + - * / : ? = ! |
else
call add(indtokens, [a:line[i], vcol, i])
let next_i = i + 1
endif
if next_vcol ==# ''
let vcol += next_i - i
else
let vcol = next_vcol
endif
let i = next_i
endwhile
return indtokens
endfunction
" TODO: doc, handle "not found" case
function! s:GetIndtokenAtCol(indtokens, col)
let i = 0
while i < len(a:indtokens)
if a:indtokens[i][2] ==# a:col
return [1, i]
elseif a:indtokens[i][2] > a:col
return [0, s:IndentError('No token at col ' . a:col . ', ' .
\'indtokens = ' . string(a:indtokens),
\'', '')]
endif
let i += 1
endwhile
return [0, s:IndentError('No token at col ' . a:col . ', ' .
\'indtokens = ' . string(a:indtokens),
\'', '')]
endfunction
" Stack library {{{1
" =============
" Purpose:
" Push a token onto the parser's stack.
" Parameters:
" stack: [token]
" token: string
function! s:Push(stack, token)
call s:Log(' Stack Push: "' . a:token . '" into ' . string(a:stack))
call insert(a:stack, a:token)
endfunction
" Purpose:
" Pop a token from the parser's stack.
" Parameters:
" stack: [token]
" token: string
" Returns:
" token: string -- the removed element
function! s:Pop(stack)
let head = remove(a:stack, 0)
call s:Log(' Stack Pop: "' . head . '" from ' . string(a:stack))
return head
endfunction
" Library for accessing and storing tokenized lines {{{1
" =================================================
" The Erlang token cache: an `lnum -> indtokens` dictionary that stores the
" tokenized lines.
let s:all_tokens = {}
let s:file_name = ''
let s:last_changedtick = -1
" Purpose:
" Clear the Erlang token cache if we have a different file or the file has
" been changed since the last indentation.
function! s:ClearTokenCacheIfNeeded()
let file_name = expand('%:p')
if file_name != s:file_name ||
\ b:changedtick != s:last_changedtick
let s:file_name = file_name
let s:last_changedtick = b:changedtick
let s:all_tokens = {}
endif
endfunction
" Purpose:
" Return the tokens of line `lnum`, if that line is not empty. If it is
" empty, find the first non-empty line in the given `direction` and return
" the tokens of that line.
" Parameters:
" lnum: integer
" direction: 'up' | 'down'
" Returns:
" result: [] -- the result is an empty list if we hit the beginning or end
" of the file
" | [lnum, indtokens]
" lnum: integer -- the index of the non-empty line that was found and
" tokenized
" indtokens: [indtoken] -- the tokens of line `lnum`
function! s:TokenizeLine(lnum, direction)
call s:Log('Tokenizing starts from line ' . a:lnum)
if a:direction ==# 'up'
let lnum = prevnonblank(a:lnum)
else " a:direction ==# 'down'
let lnum = nextnonblank(a:lnum)
endif
" We hit the beginning or end of the file
if lnum ==# 0
let indtokens = []
call s:Log(' We hit the beginning or end of the file.')
" The line has already been parsed
elseif has_key(s:all_tokens, lnum)
let indtokens = s:all_tokens[lnum]
call s:Log('Cached line ' . lnum . ': ' . getline(lnum))
call s:Log(" Tokens in the line:\n - " . join(indtokens, "\n - "))
" The line should be parsed now
else
" Parse the line
let line = getline(lnum)
let string_continuation = s:IsLineStringContinuation(lnum)
let atom_continuation = s:IsLineAtomContinuation(lnum)
let indtokens = s:GetTokensFromLine(line, string_continuation,
\atom_continuation, &tabstop)
let s:all_tokens[lnum] = indtokens
call s:Log('Tokenizing line ' . lnum . ': ' . line)
call s:Log(" Tokens in the line:\n - " . join(indtokens, "\n - "))
endif
return [lnum, indtokens]
endfunction
" Purpose:
" As a helper function for PrevIndToken and NextIndToken, the FindIndToken
" function finds the first line with at least one token in the given
" direction.
" Parameters:
" lnum: integer
" direction: 'up' | 'down'
" Returns:
" result: [] -- the result is an empty list if we hit the beginning or end
" of the file
" | indtoken
function! s:FindIndToken(lnum, dir)
let lnum = a:lnum
while 1
let lnum += (a:dir ==# 'up' ? -1 : 1)
let [lnum, indtokens] = s:TokenizeLine(lnum, a:dir)
if lnum ==# 0
" We hit the beginning or end of the file
return []
elseif !empty(indtokens)
return indtokens[a:dir ==# 'up' ? -1 : 0]
endif
endwhile
endfunction
" Purpose:
" Find the token that directly precedes the given token.
" Parameters:
" lnum: integer -- the line of the given token
" i: the index of the given token within line `lnum`
" Returns:
" result = [] -- the result is an empty list if the given token is the first
" token of the file
" | indtoken
function! s:PrevIndToken(lnum, i)
call s:Log(' PrevIndToken called: lnum=' . a:lnum . ', i =' . a:i)
" If the current line has a previous token, return that
if a:i > 0
return s:all_tokens[a:lnum][a:i - 1]
else
return s:FindIndToken(a:lnum, 'up')
endif
endfunction
" Purpose:
" Find the token that directly succeeds the given token.
" Parameters:
" lnum: integer -- the line of the given token
" i: the index of the given token within line `lnum`
" Returns:
" result = [] -- the result is an empty list if the given token is the last
" token of the file
" | indtoken
function! s:NextIndToken(lnum, i)
call s:Log(' NextIndToken called: lnum=' . a:lnum . ', i =' . a:i)
" If the current line has a next token, return that
if len(s:all_tokens[a:lnum]) > a:i + 1
return s:all_tokens[a:lnum][a:i + 1]
else
return s:FindIndToken(a:lnum, 'down')
endif
endfunction
" ErlangCalcIndent helper functions {{{1
" =================================
" Purpose:
" This function is called when the parser encounters a syntax error.
"
" If we encounter a syntax error, we return
" g:erlang_unexpected_token_indent, which is -1 by default. This means that
" the indentation of the LTI will not be changed.
" Parameter:
" msg: string
" token: string
" stack: [token]
" Returns:
" indent: integer
function! s:IndentError(msg, token, stack)
call s:Log('Indent error: ' . a:msg . ' -> return')
call s:Log(' Token = ' . a:token . ', ' .
\' stack = ' . string(a:stack))
return g:erlang_unexpected_token_indent
endfunction
" Purpose:
" This function is called when the parser encounters an unexpected token,
" and the parser will return the number given back by UnexpectedToken.
"
" If we encounter an unexpected token, we return
" g:erlang_unexpected_token_indent, which is -1 by default. This means that
" the indentation of the LTI will not be changed.
" Parameter:
" token: string
" stack: [token]
" Returns:
" indent: integer
function! s:UnexpectedToken(token, stack)
call s:Log(' Unexpected token ' . a:token . ', stack = ' .
\string(a:stack) . ' -> return')
return g:erlang_unexpected_token_indent
endfunction
if !exists('g:erlang_unexpected_token_indent')
let g:erlang_unexpected_token_indent = -1
endif
" Purpose:
" Return whether the given line starts with a string continuation.
" Parameter:
" lnum: integer
" Returns:
" result: bool
" Example:
" f() -> % IsLineStringContinuation = false
" "This is a % IsLineStringContinuation = false
" multiline % IsLineStringContinuation = true
" string". % IsLineStringContinuation = true
function! s:IsLineStringContinuation(lnum)
if has('syntax_items')
return synIDattr(synID(a:lnum, 1, 0), 'name') =~# '^erlangString'
else
return 0
endif
endfunction
" Purpose:
" Return whether the given line starts with an atom continuation.
" Parameter:
" lnum: integer
" Returns:
" result: bool
" Example:
" 'function with % IsLineAtomContinuation = true, but should be false
" weird name'() -> % IsLineAtomContinuation = true
" ok. % IsLineAtomContinuation = false
function! s:IsLineAtomContinuation(lnum)
if has('syntax_items')
return synIDattr(synID(a:lnum, 1, 0), 'name') =~# '^erlangQuotedAtom'
else
return 0
endif
endfunction
" Purpose:
" Return whether the 'catch' token (which should be the `i`th token in line
" `lnum`) is standalone or part of a try-catch block, based on the preceding
" token.
" Parameters:
" lnum: integer
" i: integer
" Return:
" is_standalone: bool
function! s:IsCatchStandalone(lnum, i)
call s:Log(' IsCatchStandalone called: lnum=' . a:lnum . ', i=' . a:i)
let prev_indtoken = s:PrevIndToken(a:lnum, a:i)
" If we hit the beginning of the file, it is not a catch in a try block
if prev_indtoken == []
return 1
endif
let prev_token = prev_indtoken[0]
if prev_token =~# '[A-Z_@0-9]'
let is_standalone = 0
elseif prev_token =~# '[a-z]'
if index(['after', 'and', 'andalso', 'band', 'begin', 'bnot', 'bor', 'bsl',
\ 'bsr', 'bxor', 'case', 'catch', 'div', 'not', 'or', 'orelse',
\ 'rem', 'try', 'xor'], prev_token) != -1
" If catch is after these keywords, it is standalone
let is_standalone = 1
else
" If catch is after another keyword (e.g. 'end') or an atom, it is
" part of try-catch.
"
" Keywords:
" - may precede 'catch': end
" - may not precede 'catch': fun if of receive when
" - unused: cond let query
let is_standalone = 0
endif
elseif index([')', ']', '}', '<string>', '<string_end>', '<quoted_atom>',
\ '<quoted_atom_end>', '$.'], prev_token) != -1
let is_standalone = 0
else
" This 'else' branch includes the following tokens:
" -> == /= =< < >= > =:= =/= + - * / ++ -- :: < > ; ( [ { ? = ! . |
let is_standalone = 1
endif
call s:Log(' "catch" preceded by "' . prev_token . '" -> catch ' .
\(is_standalone ? 'is standalone' : 'belongs to try-catch'))
return is_standalone
endfunction
" Purpose:
" This function is called when a begin-type element ('begin', 'case',
" '[', '<<', etc.) is found. It asks the caller to return if the stack
" Parameters:
" stack: [token]
" token: string
" curr_vcol: integer
" stored_vcol: integer
" sw: integer -- number of spaces to be used after the begin element as
" indentation
" Returns:
" result: [should_return, indent]
" should_return: bool -- if true, the caller should return `indent` to Vim
" indent -- integer
function! s:BeginElementFoundIfEmpty(stack, token, curr_vcol, stored_vcol, sw)
if empty(a:stack)
if a:stored_vcol ==# -1
call s:Log(' "' . a:token . '" directly preceeds LTI -> return')
return [1, a:curr_vcol + a:sw]
else
call s:Log(' "' . a:token .
\'" token (whose expression includes LTI) found -> return')
return [1, a:stored_vcol]
endif
else
return [0, 0]
endif
endfunction
" Purpose:
" This function is called when a begin-type element ('begin', 'case', '[',
" '<<', etc.) is found, and in some cases when 'after' and 'when' is found.
" It asks the caller to return if the stack is already empty.
" Parameters:
" stack: [token]
" token: string
" curr_vcol: integer
" stored_vcol: integer
" end_token: end token that belongs to the begin element found (e.g. if the
" begin element is 'begin', the end token is 'end')
" sw: integer -- number of spaces to be used after the begin element as
" indentation
" Returns:
" result: [should_return, indent]
" should_return: bool -- if true, the caller should return `indent` to Vim
" indent -- integer
function! s:BeginElementFound(stack, token, curr_vcol, stored_vcol, end_token, sw)
" Return 'return' if the stack is empty
let [ret, res] = s:BeginElementFoundIfEmpty(a:stack, a:token, a:curr_vcol,
\a:stored_vcol, a:sw)
if ret | return [ret, res] | endif
if a:stack[0] ==# a:end_token
call s:Log(' "' . a:token . '" pops "' . a:end_token . '"')
call s:Pop(a:stack)
if !empty(a:stack) && a:stack[0] ==# 'align_to_begin_element'
call s:Pop(a:stack)
if empty(a:stack)
return [1, a:curr_vcol]
else
return [1, s:UnexpectedToken(a:token, a:stack)]
endif
else
return [0, 0]
endif
else
return [1, s:UnexpectedToken(a:token, a:stack)]
endif
endfunction
" Purpose:
" This function is called when we hit the beginning of a file or an
" end-of-clause token -- i.e. when we found the beginning of the current
" clause.
"
" If the stack contains an '->' or 'when', this means that we can return
" now, since we were looking for the beginning of the clause.
" Parameters:
" stack: [token]
" token: string
" stored_vcol: integer
" Returns:
" result: [should_return, indent]
" should_return: bool -- if true, the caller should return `indent` to Vim
" indent -- integer
function! s:BeginningOfClauseFound(stack, token, stored_vcol)
if !empty(a:stack) && a:stack[0] ==# 'when'
call s:Log(' BeginningOfClauseFound: "when" found in stack')
call s:Pop(a:stack)
if empty(a:stack)
call s:Log(' Stack is ["when"], so LTI is in a guard -> return')
return [1, a:stored_vcol + shiftwidth() + 2]
else
return [1, s:UnexpectedToken(a:token, a:stack)]
endif
elseif !empty(a:stack) && a:stack[0] ==# '->'
call s:Log(' BeginningOfClauseFound: "->" found in stack')
call s:Pop(a:stack)
if empty(a:stack)
call s:Log(' Stack is ["->"], so LTI is in function body -> return')
return [1, a:stored_vcol + shiftwidth()]
elseif a:stack[0] ==# ';'
call s:Pop(a:stack)
if empty(a:stack)
call s:Log(' Stack is ["->", ";"], so LTI is in a function head ' .
\'-> return')
return [0, a:stored_vcol]
else
return [1, s:UnexpectedToken(a:token, a:stack)]
endif
else
return [1, s:UnexpectedToken(a:token, a:stack)]
endif
else
return [0, 0]
endif
endfunction
let g:erlang_indent_searchpair_timeout = 2000
" TODO
function! s:SearchPair(lnum, curr_col, start, middle, end)
call cursor(a:lnum, a:curr_col + 1)
let [lnum_new, col1_new] =
\searchpairpos(a:start, a:middle, a:end, 'bW',
\'synIDattr(synID(line("."), col("."), 0), "name") ' .
\'=~? "string\\|quotedatom\\|todo\\|comment\\|' .
\'erlangmodifier"',
\0, g:erlang_indent_searchpair_timeout)
return [lnum_new, col1_new - 1]
endfunction
function! s:SearchEndPair(lnum, curr_col)
return s:SearchPair(
\ a:lnum, a:curr_col,
\ '\C\<\%(case\|try\|begin\|receive\|if\)\>\|' .
\ '\<fun\>\%(\s\|\n\|%.*$\)*(',
\ '',
\ '\<end\>')
endfunction
" ErlangCalcIndent {{{1
" ================
" Purpose:
" Calculate the indentation of the given line.
" Parameters:
" lnum: integer -- index of the line for which the indentation should be
" calculated
" stack: [token] -- initial stack
" Return:
" indent: integer -- if -1, that means "don't change the indentation";
" otherwise it means "indent the line with `indent`
" number of spaces or equivalent tabs"
function! s:ErlangCalcIndent(lnum, stack)
let res = s:ErlangCalcIndent2(a:lnum, a:stack)
call s:Log("ErlangCalcIndent returned: " . res)
return res
endfunction
function! s:ErlangCalcIndent2(lnum, stack)
let lnum = a:lnum
let stored_vcol = -1 " Virtual column of the first character of the token that
" we currently think we might align to.
let mode = 'normal'
let stack = a:stack
let semicolon_abscol = ''
" Walk through the lines of the buffer backwards (starting from the
" previous line) until we can decide how to indent the current line.
while 1
let [lnum, indtokens] = s:TokenizeLine(lnum, 'up')
" Hit the start of the file
if lnum ==# 0
let [ret, res] = s:BeginningOfClauseFound(stack, 'beginning_of_file',
\stored_vcol)
if ret | return res | endif
return 0
endif
let i = len(indtokens) - 1
let last_token_of_line = 1
while i >= 0
let [token, curr_vcol, curr_col] = indtokens[i]
call s:Log(' Analyzing the following token: ' . string(indtokens[i]))
if len(stack) > 256 " TODO: magic number
return s:IndentError('Stack too long', token, stack)
endif
if token ==# '<end_of_clause>'
let [ret, res] = s:BeginningOfClauseFound(stack, token, stored_vcol)
if ret | return res | endif
if stored_vcol ==# -1
call s:Log(' End of clause directly preceeds LTI -> return')
return 0
else
call s:Log(' End of clause (but not end of line) -> return')
return stored_vcol
endif
elseif stack == ['prev_term_plus']
if token =~# '[a-zA-Z_@]' ||
\ token ==# '<string>' || token ==# '<string_start>' ||
\ token ==# '<quoted_atom>' || token ==# '<quoted_atom_start>'
call s:Log(' previous token found: curr_vcol + plus = ' .
\curr_vcol . " + " . plus)
return curr_vcol + plus
endif
elseif token ==# 'begin'
let [ret, res] = s:BeginElementFound(stack, token, curr_vcol,
\stored_vcol, 'end', shiftwidth())
if ret | return res | endif
" case EXPR of BRANCHES end
" try EXPR catch BRANCHES end
" try EXPR after BODY end
" try EXPR catch BRANCHES after BODY end
" try EXPR of BRANCHES catch BRANCHES end
" try EXPR of BRANCHES after BODY end
" try EXPR of BRANCHES catch BRANCHES after BODY end
" receive BRANCHES end
" receive BRANCHES after BRANCHES end
" This branch is not Emacs-compatible
elseif (index(['of', 'receive', 'after', 'if'], token) != -1 ||
\ (token ==# 'catch' && !s:IsCatchStandalone(lnum, i))) &&
\ !last_token_of_line &&
\ (empty(stack) || stack ==# ['when'] || stack ==# ['->'] ||
\ stack ==# ['->', ';'])
" If we are after of/receive, but these are not the last
" tokens of the line, we want to indent like this:
"
" % stack == []
" receive stored_vcol,
" LTI
"
" % stack == ['->', ';']
" receive stored_vcol ->
" B;
" LTI
"
" % stack == ['->']
" receive stored_vcol ->
" LTI
"
" % stack == ['when']
" receive stored_vcol when
" LTI
" stack = [] => LTI is a condition
" stack = ['->'] => LTI is a branch
" stack = ['->', ';'] => LTI is a condition
" stack = ['when'] => LTI is a guard
if empty(stack) || stack == ['->', ';']
call s:Log(' LTI is in a condition after ' .
\'"of/receive/after/if/catch" -> return')
return stored_vcol
elseif stack == ['->']
call s:Log(' LTI is in a branch after ' .
\'"of/receive/after/if/catch" -> return')
return stored_vcol + shiftwidth()
elseif stack == ['when']
call s:Log(' LTI is in a guard after ' .
\'"of/receive/after/if/catch" -> return')
return stored_vcol + shiftwidth()
else
return s:UnexpectedToken(token, stack)
endif
elseif index(['case', 'if', 'try', 'receive'], token) != -1
" stack = [] => LTI is a condition
" stack = ['->'] => LTI is a branch
" stack = ['->', ';'] => LTI is a condition
" stack = ['when'] => LTI is in a guard
if empty(stack)
" pass
elseif (token ==# 'case' && stack[0] ==# 'of') ||
\ (token ==# 'if') ||
\ (token ==# 'try' && (stack[0] ==# 'of' ||
\ stack[0] ==# 'catch' ||
\ stack[0] ==# 'after')) ||
\ (token ==# 'receive')
" From the indentation point of view, the keyword
" (of/catch/after/end) before the LTI is what counts, so
" when we reached these tokens, and the stack already had
" a catch/after/end, we didn't modify it.
"
" This way when we reach case/try/receive (i.e. now),
" there is at most one of/catch/after/end token in the
" stack.
if token ==# 'case' || token ==# 'try' ||
\ (token ==# 'receive' && stack[0] ==# 'after')
call s:Pop(stack)
endif
if empty(stack)
call s:Log(' LTI is in a condition; matching ' .
\'"case/if/try/receive" found')
let stored_vcol = curr_vcol + shiftwidth()
elseif stack[0] ==# 'align_to_begin_element'
call s:Pop(stack)
let stored_vcol = curr_vcol
elseif len(stack) > 1 && stack[0] ==# '->' && stack[1] ==# ';'
call s:Log(' LTI is in a condition; matching ' .
\'"case/if/try/receive" found')
call s:Pop(stack)
call s:Pop(stack)
let stored_vcol = curr_vcol + shiftwidth()
elseif stack[0] ==# '->'
call s:Log(' LTI is in a branch; matching ' .
\'"case/if/try/receive" found')
call s:Pop(stack)
let stored_vcol = curr_vcol + 2 * shiftwidth()
elseif stack[0] ==# 'when'
call s:Log(' LTI is in a guard; matching ' .
\'"case/if/try/receive" found')
call s:Pop(stack)
let stored_vcol = curr_vcol + 2 * shiftwidth() + 2
endif
endif
let [ret, res] = s:BeginElementFound(stack, token, curr_vcol,
\stored_vcol, 'end', shiftwidth())
if ret | return res | endif
elseif token ==# 'fun'
let next_indtoken = s:NextIndToken(lnum, i)
call s:Log(' Next indtoken = ' . string(next_indtoken))
if !empty(next_indtoken) && next_indtoken[0] ==# '('
" We have an anonymous function definition
" (e.g. "fun () -> ok end")
" stack = [] => LTI is a condition
" stack = ['->'] => LTI is a branch
" stack = ['->', ';'] => LTI is a condition
" stack = ['when'] => LTI is in a guard
if empty(stack)
call s:Log(' LTI is in a condition; matching "fun" found')
let stored_vcol = curr_vcol + shiftwidth()
elseif len(stack) > 1 && stack[0] ==# '->' && stack[1] ==# ';'
call s:Log(' LTI is in a condition; matching "fun" found')
call s:Pop(stack)
call s:Pop(stack)
elseif stack[0] ==# '->'
call s:Log(' LTI is in a branch; matching "fun" found')
call s:Pop(stack)
let stored_vcol = curr_vcol + 2 * shiftwidth()
elseif stack[0] ==# 'when'
call s:Log(' LTI is in a guard; matching "fun" found')
call s:Pop(stack)
let stored_vcol = curr_vcol + 2 * shiftwidth() + 2
endif
let [ret, res] = s:BeginElementFound(stack, token, curr_vcol,
\stored_vcol, 'end', shiftwidth())
if ret | return res | endif
else
" Pass: we have a function reference (e.g. "fun f/0")
endif
elseif token ==# '['
" Emacs compatibility
let [ret, res] = s:BeginElementFound(stack, token, curr_vcol,
\stored_vcol, ']', 1)
if ret | return res | endif
elseif token ==# '<<'
" Emacs compatibility
let [ret, res] = s:BeginElementFound(stack, token, curr_vcol,
\stored_vcol, '>>', 2)
if ret | return res | endif
elseif token ==# '(' || token ==# '{'
let end_token = (token ==# '(' ? ')' :
\token ==# '{' ? '}' : 'error')
if empty(stack)
" We found the opening paren whose block contains the LTI.
let mode = 'inside'
elseif stack[0] ==# end_token
call s:Log(' "' . token . '" pops "' . end_token . '"')
call s:Pop(stack)
if !empty(stack) && stack[0] ==# 'align_to_begin_element'
" We found the opening paren whose closing paren
" starts LTI
let mode = 'align_to_begin_element'
else
" We found the opening pair for a closing paren that
" was already in the stack.
let mode = 'outside'
endif
else
return s:UnexpectedToken(token, stack)
endif
if mode ==# 'inside' || mode ==# 'align_to_begin_element'
if last_token_of_line && i != 0
" Examples: {{{
"
" mode == 'inside':
"
" my_func(
" LTI
"
" [Variable, {
" LTI
"
" mode == 'align_to_begin_element':
"
" my_func(
" Params
" ) % LTI
"
" [Variable, {
" Terms
" } % LTI
" }}}
let stack = ['prev_term_plus']
let plus = (mode ==# 'inside' ? 2 : 1)
call s:Log(' "' . token .
\'" token found at end of line -> find previous token')
elseif mode ==# 'align_to_begin_element'
" Examples: {{{
"
" mode == 'align_to_begin_element' && !last_token_of_line
"
" my_func(stored_vcol
" ) % LTI
"
" [Variable, {stored_vcol
" } % LTI
"
" mode == 'align_to_begin_element' && i == 0
"
" (
" stored_vcol
" ) % LTI
"
" {
" stored_vcol
" } % LTI
" }}}
call s:Log(' "' . token . '" token (whose closing token ' .
\'starts LTI) found -> return')
return curr_vcol
elseif stored_vcol ==# -1
" Examples: {{{
"
" mode == 'inside' && stored_vcol == -1 && !last_token_of_line
"
" my_func(
" LTI
" [Variable, {
" LTI
"
" mode == 'inside' && stored_vcol == -1 && i == 0
"
" (
" LTI
"
" {
" LTI
" }}}
call s:Log(' "' . token .
\'" token (which directly precedes LTI) found -> return')
return curr_vcol + 1
else
" Examples: {{{
"
" mode == 'inside' && stored_vcol != -1 && !last_token_of_line
"
" my_func(stored_vcol,
" LTI
"
" [Variable, {stored_vcol,
" LTI
"
" mode == 'inside' && stored_vcol != -1 && i == 0
"
" (stored_vcol,
" LTI
"
" {stored_vcol,
" LTI
" }}}
call s:Log(' "' . token .
\'" token (whose block contains LTI) found -> return')
return stored_vcol
endif
endif
elseif index(['end', ')', ']', '}', '>>'], token) != -1
" If we can be sure that there is synchronization in the Erlang
" syntax, we use searchpair to make the script quicker. Otherwise we
" just push the token onto the stack and keep parsing.
" No synchronization -> no searchpair optimization
if !exists('b:erlang_syntax_synced')
call s:Push(stack, token)
" We don't have searchpair optimization for '>>'
elseif token ==# '>>'
call s:Push(stack, token)
elseif token ==# 'end'
let [lnum_new, col_new] = s:SearchEndPair(lnum, curr_col)
if lnum_new ==# 0
return s:IndentError('Matching token for "end" not found',
\token, stack)
else
if lnum_new != lnum
call s:Log(' Tokenize for "end" <<<<')
let [lnum, indtokens] = s:TokenizeLine(lnum_new, 'up')
call s:Log(' >>>> Tokenize for "end"')
endif
let [success, i] = s:GetIndtokenAtCol(indtokens, col_new)
if !success | return i | endif
let [token, curr_vcol, curr_col] = indtokens[i]
call s:Log(' Match for "end" in line ' . lnum_new . ': ' .
\string(indtokens[i]))
endif
else " token is one of the following: ')', ']', '}'
call s:Push(stack, token)
" We have to escape '[', because this string will be interpreted as a
" regexp
let open_paren = (token ==# ')' ? '(' :
\token ==# ']' ? '\[' :
\ '{')
let [lnum_new, col_new] = s:SearchPair(lnum, curr_col,
\open_paren, '', token)
if lnum_new ==# 0
return s:IndentError('Matching token not found',
\token, stack)
else
if lnum_new != lnum
call s:Log(' Tokenize the opening paren <<<<')
let [lnum, indtokens] = s:TokenizeLine(lnum_new, 'up')
call s:Log(' >>>>')
endif
let [success, i] = s:GetIndtokenAtCol(indtokens, col_new)
if !success | return i | endif
let [token, curr_vcol, curr_col] = indtokens[i]
call s:Log(' Match in line ' . lnum_new . ': ' .
\string(indtokens[i]))
" Go back to the beginning of the loop and handle the opening paren
continue
endif
endif
elseif token ==# ';'
if empty(stack)
call s:Push(stack, ';')
elseif index([';', '->', 'when', 'end', 'after', 'catch'],
\stack[0]) != -1
" Pass:
"
" - If the stack top is another ';', then one ';' is
" enough.
" - If the stack top is an '->' or a 'when', then we
" should keep that, because they signify the type of the
" LTI (branch, condition or guard).
" - From the indentation point of view, the keyword
" (of/catch/after/end) before the LTI is what counts, so
" if the stack already has a catch/after/end, we don't
" modify it. This way when we reach case/try/receive,
" there will be at most one of/catch/after/end token in
" the stack.
else
return s:UnexpectedToken(token, stack)
endif
elseif token ==# '->'
if empty(stack) && !last_token_of_line
call s:Log(' LTI is in expression after arrow -> return')
return stored_vcol
elseif empty(stack) || stack[0] ==# ';' || stack[0] ==# 'end'
" stack = [';'] -> LTI is either a branch or in a guard
" stack = ['->'] -> LTI is a condition
" stack = ['->', ';'] -> LTI is a branch
call s:Push(stack, '->')
elseif index(['->', 'when', 'end', 'after', 'catch'], stack[0]) != -1
" Pass:
"
" - If the stack top is another '->', then one '->' is
" enough.
" - If the stack top is a 'when', then we should keep
" that, because this signifies that LTI is a in a guard.
" - From the indentation point of view, the keyword
" (of/catch/after/end) before the LTI is what counts, so
" if the stack already has a catch/after/end, we don't
" modify it. This way when we reach case/try/receive,
" there will be at most one of/catch/after/end token in
" the stack.
else
return s:UnexpectedToken(token, stack)
endif
elseif token ==# 'when'
" Pop all ';' from the top of the stack
while !empty(stack) && stack[0] ==# ';'
call s:Pop(stack)
endwhile
if empty(stack)
if semicolon_abscol != ''
let stored_vcol = semicolon_abscol
endif
if !last_token_of_line
" Example:
" when A,
" LTI
let [ret, res] = s:BeginElementFoundIfEmpty(stack, token, curr_vcol,
\stored_vcol, shiftwidth())
if ret | return res | endif
else
" Example:
" when
" LTI
call s:Push(stack, token)
endif
elseif index(['->', 'when', 'end', 'after', 'catch'], stack[0]) != -1
" Pass:
" - If the stack top is another 'when', then one 'when' is
" enough.
" - If the stack top is an '->' or a 'when', then we
" should keep that, because they signify the type of the
" LTI (branch, condition or guard).
" - From the indentation point of view, the keyword
" (of/catch/after/end) before the LTI is what counts, so
" if the stack already has a catch/after/end, we don't
" modify it. This way when we reach case/try/receive,
" there will be at most one of/catch/after/end token in
" the stack.
else
return s:UnexpectedToken(token, stack)
endif
elseif token ==# 'of' || token ==# 'after' ||
\ (token ==# 'catch' && !s:IsCatchStandalone(lnum, i))
if token ==# 'after'
" If LTI is between an 'after' and the corresponding
" 'end', then let's return
let [ret, res] = s:BeginElementFoundIfEmpty(stack, token, curr_vcol,
\stored_vcol, shiftwidth())
if ret | return res | endif
endif
if empty(stack) || stack[0] ==# '->' || stack[0] ==# 'when'
call s:Push(stack, token)
elseif stack[0] ==# 'catch' || stack[0] ==# 'after' || stack[0] ==# 'end'
" Pass: From the indentation point of view, the keyword
" (of/catch/after/end) before the LTI is what counts, so
" if the stack already has a catch/after/end, we don't
" modify it. This way when we reach case/try/receive,
" there will be at most one of/catch/after/end token in
" the stack.
else
return s:UnexpectedToken(token, stack)
endif
elseif token ==# '||' && empty(stack) && !last_token_of_line
call s:Log(' LTI is in expression after "||" -> return')
return stored_vcol
else
call s:Log(' Misc token, stack unchanged = ' . string(stack))
endif
if empty(stack) || stack[0] ==# '->' || stack[0] ==# 'when'
let stored_vcol = curr_vcol
let semicolon_abscol = ''
call s:Log(' Misc token when the stack is empty or has "->" ' .
\'-> setting stored_vcol to ' . stored_vcol)
elseif stack[0] ==# ';'
let semicolon_abscol = curr_vcol
call s:Log(' Setting semicolon-stored_vcol to ' . stored_vcol)
endif
let i -= 1
call s:Log(' Token processed. stored_vcol=' . stored_vcol)
let last_token_of_line = 0
endwhile " iteration on tokens in a line
call s:Log(' Line analyzed. stored_vcol=' . stored_vcol)
if empty(stack) && stored_vcol != -1 &&
\ (!empty(indtokens) && indtokens[0][0] != '<string_end>' &&
\ indtokens[0][0] != '<quoted_atom_end>')
call s:Log(' Empty stack at the beginning of the line -> return')
return stored_vcol
endif
let lnum -= 1
endwhile " iteration on lines
endfunction
" ErlangIndent function {{{1
" =====================
function! ErlangIndent()
call s:ClearTokenCacheIfNeeded()
let currline = getline(v:lnum)
call s:Log('Indenting line ' . v:lnum . ': ' . currline)
if s:IsLineStringContinuation(v:lnum) || s:IsLineAtomContinuation(v:lnum)
call s:Log('String or atom continuation found -> ' .
\'leaving indentation unchanged')
return -1
endif
let ml = matchlist(currline,
\'^\(\s*\)\(\%(end\|of\|catch\|after\)\>\|[)\]}]\|>>\)')
" If the line has a special beginning, but not a standalone catch
if !empty(ml) && !(ml[2] ==# 'catch' && s:IsCatchStandalone(v:lnum, 0))
let curr_col = len(ml[1])
" If we can be sure that there is synchronization in the Erlang
" syntax, we use searchpair to make the script quicker.
if ml[2] ==# 'end' && exists('b:erlang_syntax_synced')
let [lnum, col] = s:SearchEndPair(v:lnum, curr_col)
if lnum ==# 0
return s:IndentError('Matching token for "end" not found',
\'end', [])
else
call s:Log(' Tokenize for "end" <<<<')
let [lnum, indtokens] = s:TokenizeLine(lnum, 'up')
call s:Log(' >>>> Tokenize for "end"')
let [success, i] = s:GetIndtokenAtCol(indtokens, col)
if !success | return i | endif
let [token, curr_vcol, curr_col] = indtokens[i]
call s:Log(' Match for "end" in line ' . lnum . ': ' .
\string(indtokens[i]))
return curr_vcol
endif
else
call s:Log(" Line type = 'end'")
let new_col = s:ErlangCalcIndent(v:lnum - 1,
\[ml[2], 'align_to_begin_element'])
endif
else
call s:Log(" Line type = 'normal'")
let new_col = s:ErlangCalcIndent(v:lnum - 1, [])
if currline =~# '^\s*when\>'
let new_col += 2
endif
endif
if new_col < -1
call s:Log('WARNING: returning new_col == ' . new_col)
return g:erlang_unexpected_token_indent
endif
return new_col
endfunction
" Cleanup {{{1
" =======
let &cpo = s:cpo_save
unlet s:cpo_save
" vim: sw=2 et fdm=marker