AlkantarClanX12
Your IP : 3.138.36.168
*index.txt* For Vim version 8.0. Last change: 2018 Apr 19
VIM REFERENCE MANUAL by Bram Moolenaar
*index*
This file contains a list of all commands for each mode, with a tag and a
short description. The lists are sorted on ASCII value.
Tip: When looking for certain functionality, use a search command. E.g.,
to look for deleting something, use: "/delete".
1. Insert mode |insert-index|
2. Normal mode |normal-index|
2.1. Text objects |objects|
2.2. Window commands |CTRL-W|
2.3. Square bracket commands |[|
2.4. Commands starting with 'g' |g|
2.5. Commands starting with 'z' |z|
3. Visual mode |visual-index|
4. Command-line editing |ex-edit-index|
5. EX commands |ex-cmd-index|
For an overview of options see help.txt |option-list|.
For an overview of built-in functions see |functions|.
For a list of Vim variables see |vim-variable|.
For a complete listing of all help items see |help-tags|.
==============================================================================
1. Insert mode *insert-index*
tag char action in Insert mode ~
-----------------------------------------------------------------------
|i_CTRL-@| CTRL-@ insert previously inserted text and stop
insert
|i_CTRL-A| CTRL-A insert previously inserted text
CTRL-B not used |i_CTRL-B-gone|
|i_CTRL-C| CTRL-C quit insert mode, without checking for
abbreviation, unless 'insertmode' set.
|i_CTRL-D| CTRL-D delete one shiftwidth of indent in the current
line
|i_CTRL-E| CTRL-E insert the character which is below the cursor
CTRL-F not used (but by default it's in 'cinkeys' to
re-indent the current line)
|i_CTRL-G_j| CTRL-G CTRL-J line down, to column where inserting started
|i_CTRL-G_j| CTRL-G j line down, to column where inserting started
|i_CTRL-G_j| CTRL-G <Down> line down, to column where inserting started
|i_CTRL-G_k| CTRL-G CTRL-K line up, to column where inserting started
|i_CTRL-G_k| CTRL-G k line up, to column where inserting started
|i_CTRL-G_k| CTRL-G <Up> line up, to column where inserting started
|i_CTRL-G_u| CTRL-G u start new undoable edit
|i_CTRL-G_U| CTRL-G U don't break undo with next cursor movement
|i_<BS>| <BS> delete character before the cursor
|i_digraph| {char1}<BS>{char2}
enter digraph (only when 'digraph' option set)
|i_CTRL-H| CTRL-H same as <BS>
|i_<Tab>| <Tab> insert a <Tab> character
|i_CTRL-I| CTRL-I same as <Tab>
|i_<NL>| <NL> same as <CR>
|i_CTRL-J| CTRL-J same as <CR>
|i_CTRL-K| CTRL-K {char1} {char2}
enter digraph
|i_CTRL-L| CTRL-L when 'insertmode' set: Leave Insert mode
|i_<CR>| <CR> begin new line
|i_CTRL-M| CTRL-M same as <CR>
|i_CTRL-N| CTRL-N find next match for keyword in front of the
cursor
|i_CTRL-O| CTRL-O execute a single command and return to insert
mode
|i_CTRL-P| CTRL-P find previous match for keyword in front of
the cursor
|i_CTRL-Q| CTRL-Q same as CTRL-V, unless used for terminal
control flow
|i_CTRL-R| CTRL-R {0-9a-z"%#*:=}
insert the contents of a register
|i_CTRL-R_CTRL-R| CTRL-R CTRL-R {0-9a-z"%#*:=}
insert the contents of a register literally
|i_CTRL-R_CTRL-O| CTRL-R CTRL-O {0-9a-z"%#*:=}
insert the contents of a register literally
and don't auto-indent
|i_CTRL-R_CTRL-P| CTRL-R CTRL-P {0-9a-z"%#*:=}
insert the contents of a register literally
and fix indent.
CTRL-S (used for terminal control flow)
|i_CTRL-T| CTRL-T insert one shiftwidth of indent in current
line
|i_CTRL-U| CTRL-U delete all entered characters in the current
line
|i_CTRL-V| CTRL-V {char} insert next non-digit literally
|i_CTRL-V_digit| CTRL-V {number} insert three digit decimal number as a single
byte.
|i_CTRL-W| CTRL-W delete word before the cursor
|i_CTRL-X| CTRL-X {mode} enter CTRL-X sub mode, see |i_CTRL-X_index|
|i_CTRL-Y| CTRL-Y insert the character which is above the cursor
|i_CTRL-Z| CTRL-Z when 'insertmode' set: suspend Vim
|i_<Esc>| <Esc> end insert mode (unless 'insertmode' set)
|i_CTRL-[| CTRL-[ same as <Esc>
|i_CTRL-\_CTRL-N| CTRL-\ CTRL-N go to Normal mode
|i_CTRL-\_CTRL-G| CTRL-\ CTRL-G go to mode specified with 'insertmode'
CTRL-\ a - z reserved for extensions
CTRL-\ others not used
|i_CTRL-]| CTRL-] trigger abbreviation
|i_CTRL-^| CTRL-^ toggle use of |:lmap| mappings
|i_CTRL-_| CTRL-_ When 'allowrevins' set: change language
(Hebrew, Farsi) {only when compiled with
the |+rightleft| feature}
<Space> to '~' not used, except '0' and '^' followed by
CTRL-D
|i_0_CTRL-D| 0 CTRL-D delete all indent in the current line
|i_^_CTRL-D| ^ CTRL-D delete all indent in the current line, restore
it in the next line
|i_<Del>| <Del> delete character under the cursor
Meta characters (0x80 to 0xff, 128 to 255)
not used
|i_<Left>| <Left> cursor one character left
|i_<S-Left>| <S-Left> cursor one word left
|i_<C-Left>| <C-Left> cursor one word left
|i_<Right>| <Right> cursor one character right
|i_<S-Right>| <S-Right> cursor one word right
|i_<C-Right>| <C-Right> cursor one word right
|i_<Up>| <Up> cursor one line up
|i_<S-Up>| <S-Up> same as <PageUp>
|i_<Down>| <Down> cursor one line down
|i_<S-Down>| <S-Down> same as <PageDown>
|i_<Home>| <Home> cursor to start of line
|i_<C-Home>| <C-Home> cursor to start of file
|i_<End>| <End> cursor past end of line
|i_<C-End>| <C-End> cursor past end of file
|i_<PageUp>| <PageUp> one screenful backward
|i_<PageDown>| <PageDown> one screenful forward
|i_<F1>| <F1> same as <Help>
|i_<Help>| <Help> stop insert mode and display help window
|i_<Insert>| <Insert> toggle Insert/Replace mode
|i_<LeftMouse>| <LeftMouse> cursor at mouse click
|i_<ScrollWheelDown>| <ScrollWheelDown> move window three lines down
|i_<S-ScrollWheelDown>| <S-ScrollWheelDown> move window one page down
|i_<ScrollWheelUp>| <ScrollWheelUp> move window three lines up
|i_<S-ScrollWheelUp>| <S-ScrollWheelUp> move window one page up
|i_<ScrollWheelLeft>| <ScrollWheelLeft> move window six columns left
|i_<S-ScrollWheelLeft>| <S-ScrollWheelLeft> move window one page left
|i_<ScrollWheelRight>| <ScrollWheelRight> move window six columns right
|i_<S-ScrollWheelRight>| <S-ScrollWheelRight> move window one page right
commands in CTRL-X submode *i_CTRL-X_index*
|i_CTRL-X_CTRL-D| CTRL-X CTRL-D complete defined identifiers
|i_CTRL-X_CTRL-E| CTRL-X CTRL-E scroll up
|i_CTRL-X_CTRL-F| CTRL-X CTRL-F complete file names
|i_CTRL-X_CTRL-I| CTRL-X CTRL-I complete identifiers
|i_CTRL-X_CTRL-K| CTRL-X CTRL-K complete identifiers from dictionary
|i_CTRL-X_CTRL-L| CTRL-X CTRL-L complete whole lines
|i_CTRL-X_CTRL-N| CTRL-X CTRL-N next completion
|i_CTRL-X_CTRL-O| CTRL-X CTRL-O omni completion
|i_CTRL-X_CTRL-P| CTRL-X CTRL-P previous completion
|i_CTRL-X_CTRL-S| CTRL-X CTRL-S spelling suggestions
|i_CTRL-X_CTRL-T| CTRL-X CTRL-T complete identifiers from thesaurus
|i_CTRL-X_CTRL-Y| CTRL-X CTRL-Y scroll down
|i_CTRL-X_CTRL-U| CTRL-X CTRL-U complete with 'completefunc'
|i_CTRL-X_CTRL-V| CTRL-X CTRL-V complete like in : command line
|i_CTRL-X_CTRL-]| CTRL-X CTRL-] complete tags
|i_CTRL-X_s| CTRL-X s spelling suggestions
{not available when compiled without the |+insert_expand| feature}
==============================================================================
2. Normal mode *normal-index*
CHAR any non-blank character
WORD a sequence of non-blank characters
N a number entered before the command
{motion} a cursor movement command
Nmove the text that is moved over with a {motion}
SECTION a section that possibly starts with '}' instead of '{'
note: 1 = cursor movement command; 2 = can be undone/redone
tag char note action in Normal mode ~
------------------------------------------------------------------------------
CTRL-@ not used
|CTRL-A| CTRL-A 2 add N to number at/after cursor
|CTRL-B| CTRL-B 1 scroll N screens Backwards
|CTRL-C| CTRL-C interrupt current (search) command
|CTRL-D| CTRL-D scroll Down N lines (default: half a screen)
|CTRL-E| CTRL-E scroll N lines upwards (N lines Extra)
|CTRL-F| CTRL-F 1 scroll N screens Forward
|CTRL-G| CTRL-G display current file name and position
|<BS>| <BS> 1 same as "h"
|CTRL-H| CTRL-H 1 same as "h"
|<Tab>| <Tab> 1 go to N newer entry in jump list
|CTRL-I| CTRL-I 1 same as <Tab>
|<NL>| <NL> 1 same as "j"
|CTRL-J| CTRL-J 1 same as "j"
CTRL-K not used
|CTRL-L| CTRL-L redraw screen
|<CR>| <CR> 1 cursor to the first CHAR N lines lower
|CTRL-M| CTRL-M 1 same as <CR>
|CTRL-N| CTRL-N 1 same as "j"
|CTRL-O| CTRL-O 1 go to N older entry in jump list
|CTRL-P| CTRL-P 1 same as "k"
CTRL-Q (used for terminal control flow)
|CTRL-R| CTRL-R 2 redo changes which were undone with 'u'
CTRL-S (used for terminal control flow)
|CTRL-T| CTRL-T jump to N older Tag in tag list
|CTRL-U| CTRL-U scroll N lines Upwards (default: half a
screen)
|CTRL-V| CTRL-V start blockwise Visual mode
|CTRL-W| CTRL-W {char} window commands, see |CTRL-W|
|CTRL-X| CTRL-X 2 subtract N from number at/after cursor
|CTRL-Y| CTRL-Y scroll N lines downwards
|CTRL-Z| CTRL-Z suspend program (or start new shell)
CTRL-[ <Esc> not used
|CTRL-\_CTRL-N| CTRL-\ CTRL-N go to Normal mode (no-op)
|CTRL-\_CTRL-G| CTRL-\ CTRL-G go to mode specified with 'insertmode'
CTRL-\ a - z reserved for extensions
CTRL-\ others not used
|CTRL-]| CTRL-] :ta to ident under cursor
|CTRL-^| CTRL-^ edit Nth alternate file (equivalent to
":e #N")
CTRL-_ not used
|<Space>| <Space> 1 same as "l"
|!| !{motion}{filter}
2 filter Nmove text through the {filter}
command
|!!| !!{filter} 2 filter N lines through the {filter} command
|quote| "{a-zA-Z0-9.%#:-"} use register {a-zA-Z0-9.%#:-"} for next
delete, yank or put (uppercase to append)
({.%#:} only work with put)
|#| # 1 search backward for the Nth occurrence of
the ident under the cursor
|$| $ 1 cursor to the end of Nth next line
|%| % 1 find the next (curly/square) bracket on
this line and go to its match, or go to
matching comment bracket, or go to matching
preprocessor directive.
|N%| {count}% 1 go to N percentage in the file
|&| & 2 repeat last :s
|'| '{a-zA-Z0-9} 1 cursor to the first CHAR on the line with
mark {a-zA-Z0-9}
|''| '' 1 cursor to the first CHAR of the line where
the cursor was before the latest jump.
|'(| '( 1 cursor to the first CHAR on the line of the
start of the current sentence
|')| ') 1 cursor to the first CHAR on the line of the
end of the current sentence
|'<| '< 1 cursor to the first CHAR of the line where
highlighted area starts/started in the
current buffer.
|'>| '> 1 cursor to the first CHAR of the line where
highlighted area ends/ended in the current
buffer.
|'[| '[ 1 cursor to the first CHAR on the line of the
start of last operated text or start of put
text
|']| '] 1 cursor to the first CHAR on the line of the
end of last operated text or end of put
text
|'{| '{ 1 cursor to the first CHAR on the line of the
start of the current paragraph
|'}| '} 1 cursor to the first CHAR on the line of the
end of the current paragraph
|(| ( 1 cursor N sentences backward
|)| ) 1 cursor N sentences forward
|star| * 1 search forward for the Nth occurrence of
the ident under the cursor
|+| + 1 same as <CR>
|,| , 1 repeat latest f, t, F or T in opposite
direction N times
|-| - 1 cursor to the first CHAR N lines higher
|.| . 2 repeat last change with count replaced with
N
|/| /{pattern}<CR> 1 search forward for the Nth occurrence of
{pattern}
|/<CR>| /<CR> 1 search forward for {pattern} of last search
|count| 0 1 cursor to the first char of the line
|count| 1 prepend to command to give a count
|count| 2 "
|count| 3 "
|count| 4 "
|count| 5 "
|count| 6 "
|count| 7 "
|count| 8 "
|count| 9 "
|:| : 1 start entering an Ex command
|N:| {count}: start entering an Ex command with range
from current line to N-1 lines down
|;| ; 1 repeat latest f, t, F or T N times
|<| <{motion} 2 shift Nmove lines one 'shiftwidth'
leftwards
|<<| << 2 shift N lines one 'shiftwidth' leftwards
|=| ={motion} 2 filter Nmove lines through "indent"
|==| == 2 filter N lines through "indent"
|>| >{motion} 2 shift Nmove lines one 'shiftwidth'
rightwards
|>>| >> 2 shift N lines one 'shiftwidth' rightwards
|?| ?{pattern}<CR> 1 search backward for the Nth previous
occurrence of {pattern}
|?<CR>| ?<CR> 1 search backward for {pattern} of last search
|@| @{a-z} 2 execute the contents of register {a-z}
N times
|@:| @: repeat the previous ":" command N times
|@@| @@ 2 repeat the previous @{a-z} N times
|A| A 2 append text after the end of the line N times
|B| B 1 cursor N WORDS backward
|C| ["x]C 2 change from the cursor position to the end
of the line, and N-1 more lines [into
register x]; synonym for "c$"
|D| ["x]D 2 delete the characters under the cursor
until the end of the line and N-1 more
lines [into register x]; synonym for "d$"
|E| E 1 cursor forward to the end of WORD N
|F| F{char} 1 cursor to the Nth occurrence of {char} to
the left
|G| G 1 cursor to line N, default last line
|H| H 1 cursor to line N from top of screen
|I| I 2 insert text before the first CHAR on the
line N times
|J| J 2 Join N lines; default is 2
|K| K lookup Keyword under the cursor with
'keywordprg'
|L| L 1 cursor to line N from bottom of screen
|M| M 1 cursor to middle line of screen
|N| N 1 repeat the latest '/' or '?' N times in
opposite direction
|O| O 2 begin a new line above the cursor and
insert text, repeat N times
|P| ["x]P 2 put the text [from register x] before the
cursor N times
|Q| Q switch to "Ex" mode
|R| R 2 enter replace mode: overtype existing
characters, repeat the entered text N-1
times
|S| ["x]S 2 delete N lines [into register x] and start
insert; synonym for "cc".
|T| T{char} 1 cursor till after Nth occurrence of {char}
to the left
|U| U 2 undo all latest changes on one line
|V| V start linewise Visual mode
|W| W 1 cursor N WORDS forward
|X| ["x]X 2 delete N characters before the cursor [into
register x]
|Y| ["x]Y yank N lines [into register x]; synonym for
"yy"
|ZZ| ZZ store current file if modified, and exit
|ZQ| ZQ exit current file always
|[| [{char} square bracket command (see |[| below)
\ not used
|]| ]{char} square bracket command (see |]| below)
|^| ^ 1 cursor to the first CHAR of the line
|_| _ 1 cursor to the first CHAR N - 1 lines lower
|`| `{a-zA-Z0-9} 1 cursor to the mark {a-zA-Z0-9}
|`(| `( 1 cursor to the start of the current sentence
|`)| `) 1 cursor to the end of the current sentence
|`<| `< 1 cursor to the start of the highlighted area
|`>| `> 1 cursor to the end of the highlighted area
|`[| `[ 1 cursor to the start of last operated text
or start of putted text
|`]| `] 1 cursor to the end of last operated text or
end of putted text
|``| `` 1 cursor to the position before latest jump
|`{| `{ 1 cursor to the start of the current paragraph
|`}| `} 1 cursor to the end of the current paragraph
|a| a 2 append text after the cursor N times
|b| b 1 cursor N words backward
|c| ["x]c{motion} 2 delete Nmove text [into register x] and
start insert
|cc| ["x]cc 2 delete N lines [into register x] and start
insert
|d| ["x]d{motion} 2 delete Nmove text [into register x]
|dd| ["x]dd 2 delete N lines [into register x]
|do| do 2 same as ":diffget"
|dp| dp 2 same as ":diffput"
|e| e 1 cursor forward to the end of word N
|f| f{char} 1 cursor to Nth occurrence of {char} to the
right
|g| g{char} extended commands, see |g| below
|h| h 1 cursor N chars to the left
|i| i 2 insert text before the cursor N times
|j| j 1 cursor N lines downward
|k| k 1 cursor N lines upward
|l| l 1 cursor N chars to the right
|m| m{A-Za-z} set mark {A-Za-z} at cursor position
|n| n 1 repeat the latest '/' or '?' N times
|o| o 2 begin a new line below the cursor and
insert text, repeat N times
|p| ["x]p 2 put the text [from register x] after the
cursor N times
|q| q{0-9a-zA-Z"} record typed characters into named register
{0-9a-zA-Z"} (uppercase to append)
|q| q (while recording) stops recording
|q:| q: edit : command-line in command-line window
|q/| q/ edit / command-line in command-line window
|q?| q? edit ? command-line in command-line window
|r| r{char} 2 replace N chars with {char}
|s| ["x]s 2 (substitute) delete N characters [into
register x] and start insert
|t| t{char} 1 cursor till before Nth occurrence of {char}
to the right
|u| u 2 undo changes
|v| v start characterwise Visual mode
|w| w 1 cursor N words forward
|x| ["x]x 2 delete N characters under and after the
cursor [into register x]
|y| ["x]y{motion} yank Nmove text [into register x]
|yy| ["x]yy yank N lines [into register x]
|z| z{char} commands starting with 'z', see |z| below
|{| { 1 cursor N paragraphs backward
|bar| | 1 cursor to column N
|}| } 1 cursor N paragraphs forward
|~| ~ 2 'tildeop' off: switch case of N characters
under cursor and move the cursor N
characters to the right
|~| ~{motion} 'tildeop' on: switch case of Nmove text
|<C-End>| <C-End> 1 same as "G"
|<C-Home>| <C-Home> 1 same as "gg"
|<C-Left>| <C-Left> 1 same as "b"
|<C-LeftMouse>| <C-LeftMouse> ":ta" to the keyword at the mouse click
|<C-Right>| <C-Right> 1 same as "w"
|<C-RightMouse>| <C-RightMouse> same as "CTRL-T"
|<Del>| ["x]<Del> 2 same as "x"
|N<Del>| {count}<Del> remove the last digit from {count}
|<Down>| <Down> 1 same as "j"
|<End>| <End> 1 same as "$"
|<F1>| <F1> same as <Help>
|<Help>| <Help> open a help window
|<Home>| <Home> 1 same as "0"
|<Insert>| <Insert> 2 same as "i"
|<Left>| <Left> 1 same as "h"
|<LeftMouse>| <LeftMouse> 1 move cursor to the mouse click position
|<MiddleMouse>| <MiddleMouse> 2 same as "gP" at the mouse click position
|<PageDown>| <PageDown> same as CTRL-F
|<PageUp>| <PageUp> same as CTRL-B
|<Right>| <Right> 1 same as "l"
|<RightMouse>| <RightMouse> start Visual mode, move cursor to the mouse
click position
|<S-Down>| <S-Down> 1 same as CTRL-F
|<S-Left>| <S-Left> 1 same as "b"
|<S-LeftMouse>| <S-LeftMouse> same as "*" at the mouse click position
|<S-Right>| <S-Right> 1 same as "w"
|<S-RightMouse>| <S-RightMouse> same as "#" at the mouse click position
|<S-Up>| <S-Up> 1 same as CTRL-B
|<Undo>| <Undo> 2 same as "u"
|<Up>| <Up> 1 same as "k"
|<ScrollWheelDown>| <ScrollWheelDown> move window three lines down
|<S-ScrollWheelDown>| <S-ScrollWheelDown> move window one page down
|<ScrollWheelUp>| <ScrollWheelUp> move window three lines up
|<S-ScrollWheelUp>| <S-ScrollWheelUp> move window one page up
|<ScrollWheelLeft>| <ScrollWheelLeft> move window six columns left
|<S-ScrollWheelLeft>| <S-ScrollWheelLeft> move window one page left
|<ScrollWheelRight>| <ScrollWheelRight> move window six columns right
|<S-ScrollWheelRight>| <S-ScrollWheelRight> move window one page right
==============================================================================
2.1 Text objects *objects*
These can be used after an operator or in Visual mode to select an object.
tag command action in op-pending and Visual mode ~
------------------------------------------------------------------------------
|v_aquote| a" double quoted string
|v_a'| a' single quoted string
|v_a(| a( same as ab
|v_a)| a) same as ab
|v_a<| a< "a <>" from '<' to the matching '>'
|v_a>| a> same as a<
|v_aB| aB "a Block" from "[{" to "]}" (with brackets)
|v_aW| aW "a WORD" (with white space)
|v_a[| a[ "a []" from '[' to the matching ']'
|v_a]| a] same as a[
|v_a`| a` string in backticks
|v_ab| ab "a block" from "[(" to "])" (with braces)
|v_ap| ap "a paragraph" (with white space)
|v_as| as "a sentence" (with white space)
|v_at| at "a tag block" (with white space)
|v_aw| aw "a word" (with white space)
|v_a{| a{ same as aB
|v_a}| a} same as aB
|v_iquote| i" double quoted string without the quotes
|v_i'| i' single quoted string without the quotes
|v_i(| i( same as ib
|v_i)| i) same as ib
|v_i<| i< "inner <>" from '<' to the matching '>'
|v_i>| i> same as i<
|v_iB| iB "inner Block" from "[{" and "]}"
|v_iW| iW "inner WORD"
|v_i[| i[ "inner []" from '[' to the matching ']'
|v_i]| i] same as i[
|v_i`| i` string in backticks without the backticks
|v_ib| ib "inner block" from "[(" to "])"
|v_ip| ip "inner paragraph"
|v_is| is "inner sentence"
|v_it| it "inner tag block"
|v_iw| iw "inner word"
|v_i{| i{ same as iB
|v_i}| i} same as iB
==============================================================================
2.2 Window commands *CTRL-W*
tag command action in Normal mode ~
------------------------------------------------------------------------------
|CTRL-W_CTRL-B| CTRL-W CTRL-B same as "CTRL-W b"
|CTRL-W_CTRL-C| CTRL-W CTRL-C same as "CTRL-W c"
|CTRL-W_CTRL-D| CTRL-W CTRL-D same as "CTRL-W d"
|CTRL-W_CTRL-F| CTRL-W CTRL-F same as "CTRL-W f"
CTRL-W CTRL-G same as "CTRL-W g .."
|CTRL-W_CTRL-H| CTRL-W CTRL-H same as "CTRL-W h"
|CTRL-W_CTRL-I| CTRL-W CTRL-I same as "CTRL-W i"
|CTRL-W_CTRL-J| CTRL-W CTRL-J same as "CTRL-W j"
|CTRL-W_CTRL-K| CTRL-W CTRL-K same as "CTRL-W k"
|CTRL-W_CTRL-L| CTRL-W CTRL-L same as "CTRL-W l"
|CTRL-W_CTRL-N| CTRL-W CTRL-N same as "CTRL-W n"
|CTRL-W_CTRL-O| CTRL-W CTRL-O same as "CTRL-W o"
|CTRL-W_CTRL-P| CTRL-W CTRL-P same as "CTRL-W p"
|CTRL-W_CTRL-Q| CTRL-W CTRL-Q same as "CTRL-W q"
|CTRL-W_CTRL-R| CTRL-W CTRL-R same as "CTRL-W r"
|CTRL-W_CTRL-S| CTRL-W CTRL-S same as "CTRL-W s"
|CTRL-W_CTRL-T| CTRL-W CTRL-T same as "CTRL-W t"
|CTRL-W_CTRL-V| CTRL-W CTRL-V same as "CTRL-W v"
|CTRL-W_CTRL-W| CTRL-W CTRL-W same as "CTRL-W w"
|CTRL-W_CTRL-X| CTRL-W CTRL-X same as "CTRL-W x"
|CTRL-W_CTRL-Z| CTRL-W CTRL-Z same as "CTRL-W z"
|CTRL-W_CTRL-]| CTRL-W CTRL-] same as "CTRL-W ]"
|CTRL-W_CTRL-^| CTRL-W CTRL-^ same as "CTRL-W ^"
|CTRL-W_CTRL-_| CTRL-W CTRL-_ same as "CTRL-W _"
|CTRL-W_quote| CTRL-W " terminal window: paste register
|CTRL-W_+| CTRL-W + increase current window height N lines
|CTRL-W_-| CTRL-W - decrease current window height N lines
|CTRL-W_.| CTRL-W . terminal window: type CTRL-W
|CTRL-W_:| CTRL-W : same as |:|, edit a command line
|CTRL-W_<| CTRL-W < decrease current window width N columns
|CTRL-W_=| CTRL-W = make all windows the same height & width
|CTRL-W_>| CTRL-W > increase current window width N columns
|CTRL-W_H| CTRL-W H move current window to the far left
|CTRL-W_J| CTRL-W J move current window to the very bottom
|CTRL-W_K| CTRL-W K move current window to the very top
|CTRL-W_L| CTRL-W L move current window to the far right
|CTRL-W_N| CTRL-W N terminal window: go to Terminal Normal mode
|CTRL-W_P| CTRL-W P go to preview window
|CTRL-W_R| CTRL-W R rotate windows upwards N times
|CTRL-W_S| CTRL-W S same as "CTRL-W s"
|CTRL-W_T| CTRL-W T move current window to a new tab page
|CTRL-W_W| CTRL-W W go to N previous window (wrap around)
|CTRL-W_]| CTRL-W ] split window and jump to tag under cursor
|CTRL-W_^| CTRL-W ^ split current window and edit alternate
file N
|CTRL-W__| CTRL-W _ set current window height to N (default:
very high)
|CTRL-W_b| CTRL-W b go to bottom window
|CTRL-W_c| CTRL-W c close current window (like |:close|)
|CTRL-W_d| CTRL-W d split window and jump to definition under
the cursor
|CTRL-W_f| CTRL-W f split window and edit file name under the
cursor
|CTRL-W_F| CTRL-W F split window and edit file name under the
cursor and jump to the line number
following the file name.
|CTRL-W_g_CTRL-]| CTRL-W g CTRL-] split window and do |:tjump| to tag under
cursor
|CTRL-W_g]| CTRL-W g ] split window and do |:tselect| for tag
under cursor
|CTRL-W_g}| CTRL-W g } do a |:ptjump| to the tag under the cursor
|CTRL-W_gf| CTRL-W g f edit file name under the cursor in a new
tab page
|CTRL-W_gF| CTRL-W g F edit file name under the cursor in a new
tab page and jump to the line number
following the file name.
|CTRL-W_h| CTRL-W h go to Nth left window (stop at first window)
|CTRL-W_i| CTRL-W i split window and jump to declaration of
identifier under the cursor
|CTRL-W_j| CTRL-W j go N windows down (stop at last window)
|CTRL-W_k| CTRL-W k go N windows up (stop at first window)
|CTRL-W_l| CTRL-W l go to Nth right window (stop at last window)
|CTRL-W_n| CTRL-W n open new window, N lines high
|CTRL-W_o| CTRL-W o close all but current window (like |:only|)
|CTRL-W_p| CTRL-W p go to previous (last accessed) window
|CTRL-W_q| CTRL-W q quit current window (like |:quit|)
|CTRL-W_r| CTRL-W r rotate windows downwards N times
|CTRL-W_s| CTRL-W s split current window in two parts, new
window N lines high
|CTRL-W_t| CTRL-W t go to top window
|CTRL-W_v| CTRL-W v split current window vertically, new window
N columns wide
|CTRL-W_w| CTRL-W w go to N next window (wrap around)
|CTRL-W_x| CTRL-W x exchange current window with window N
(default: next window)
|CTRL-W_z| CTRL-W z close preview window
|CTRL-W_bar| CTRL-W | set window width to N columns
|CTRL-W_}| CTRL-W } show tag under cursor in preview window
|CTRL-W_<Down>| CTRL-W <Down> same as "CTRL-W j"
|CTRL-W_<Up>| CTRL-W <Up> same as "CTRL-W k"
|CTRL-W_<Left>| CTRL-W <Left> same as "CTRL-W h"
|CTRL-W_<Right>| CTRL-W <Right> same as "CTRL-W l"
==============================================================================
2.3 Square bracket commands *[* *]*
tag char note action in Normal mode ~
------------------------------------------------------------------------------
|[_CTRL-D| [ CTRL-D jump to first #define found in current and
included files matching the word under the
cursor, start searching at beginning of
current file
|[_CTRL-I| [ CTRL-I jump to first line in current and included
files that contains the word under the
cursor, start searching at beginning of
current file
|[#| [# 1 cursor to N previous unmatched #if, #else
or #ifdef
|['| [' 1 cursor to previous lowercase mark, on first
non-blank
|[(| [( 1 cursor N times back to unmatched '('
|[star| [* 1 same as "[/"
|[`| [` 1 cursor to previous lowercase mark
|[/| [/ 1 cursor to N previous start of a C comment
|[D| [D list all defines found in current and
included files matching the word under the
cursor, start searching at beginning of
current file
|[I| [I list all lines found in current and
included files that contain the word under
the cursor, start searching at beginning of
current file
|[P| [P 2 same as "[p"
|[[| [[ 1 cursor N sections backward
|[]| [] 1 cursor N SECTIONS backward
|[c| [c 1 cursor N times backwards to start of change
|[d| [d show first #define found in current and
included files matching the word under the
cursor, start searching at beginning of
current file
|[f| [f same as "gf"
|[i| [i show first line found in current and
included files that contains the word under
the cursor, start searching at beginning of
current file
|[m| [m 1 cursor N times back to start of member
function
|[p| [p 2 like "P", but adjust indent to current line
|[s| [s 1 move to the previous misspelled word
|[z| [z 1 move to start of open fold
|[{| [{ 1 cursor N times back to unmatched '{'
|[<MiddleMouse>| [<MiddleMouse> 2 same as "[p"
|]_CTRL-D| ] CTRL-D jump to first #define found in current and
included files matching the word under the
cursor, start searching at cursor position
|]_CTRL-I| ] CTRL-I jump to first line in current and included
files that contains the word under the
cursor, start searching at cursor position
|]#| ]# 1 cursor to N next unmatched #endif or #else
|]'| ]' 1 cursor to next lowercase mark, on first
non-blank
|])| ]) 1 cursor N times forward to unmatched ')'
|]star| ]* 1 same as "]/"
|]`| ]` 1 cursor to next lowercase mark
|]/| ]/ 1 cursor to N next end of a C comment
|]D| ]D list all #defines found in current and
included files matching the word under the
cursor, start searching at cursor position
|]I| ]I list all lines found in current and
included files that contain the word under
the cursor, start searching at cursor
position
|]P| ]P 2 same as "[p"
|][| ][ 1 cursor N SECTIONS forward
|]]| ]] 1 cursor N sections forward
|]c| ]c 1 cursor N times forward to start of change
|]d| ]d show first #define found in current and
included files matching the word under the
cursor, start searching at cursor position
|]f| ]f same as "gf"
|]i| ]i show first line found in current and
included files that contains the word under
the cursor, start searching at cursor
position
|]m| ]m 1 cursor N times forward to end of member
function
|]p| ]p 2 like "p", but adjust indent to current line
|]s| ]s 1 move to next misspelled word
|]z| ]z 1 move to end of open fold
|]}| ]} 1 cursor N times forward to unmatched '}'
|]<MiddleMouse>| ]<MiddleMouse> 2 same as "]p"
==============================================================================
2.4 Commands starting with 'g' *g*
tag char note action in Normal mode ~
------------------------------------------------------------------------------
|g_CTRL-A| g CTRL-A only when compiled with MEM_PROFILE
defined: dump a memory profile
|g_CTRL-G| g CTRL-G show information about current cursor
position
|g_CTRL-H| g CTRL-H start Select block mode
|g_CTRL-]| g CTRL-] |:tjump| to the tag under the cursor
|g#| g# 1 like "#", but without using "\<" and "\>"
|g$| g$ 1 when 'wrap' off go to rightmost character of
the current line that is on the screen;
when 'wrap' on go to the rightmost character
of the current screen line
|g&| g& 2 repeat last ":s" on all lines
|g'| g'{mark} 1 like |'| but without changing the jumplist
|g`| g`{mark} 1 like |`| but without changing the jumplist
|gstar| g* 1 like "*", but without using "\<" and "\>"
|g+| g+ go to newer text state N times
|g,| g, 1 go to N newer position in change list
|g-| g- go to older text state N times
|g0| g0 1 when 'wrap' off go to leftmost character of
the current line that is on the screen;
when 'wrap' on go to the leftmost character
of the current screen line
|g8| g8 print hex value of bytes used in UTF-8
character under the cursor
|g;| g; 1 go to N older position in change list
|g<| g< display previous command output
|g?| g? 2 Rot13 encoding operator
|g?g?| g?? 2 Rot13 encode current line
|g?g?| g?g? 2 Rot13 encode current line
|gD| gD 1 go to definition of word under the cursor
in current file
|gE| gE 1 go backwards to the end of the previous
WORD
|gH| gH start Select line mode
|gI| gI 2 like "I", but always start in column 1
|gJ| gJ 2 join lines without inserting space
|gN| gN 1,2 find the previous match with the last used
search pattern and Visually select it
|gP| ["x]gP 2 put the text [from register x] before the
cursor N times, leave the cursor after it
|gQ| gQ switch to "Ex" mode with Vim editing
|gR| gR 2 enter Virtual Replace mode
|gT| gT go to the previous tab page
|gU| gU{motion} 2 make Nmove text uppercase
|gV| gV don't reselect the previous Visual area
when executing a mapping or menu in Select
mode
|g]| g] :tselect on the tag under the cursor
|g^| g^ 1 when 'wrap' off go to leftmost non-white
character of the current line that is on
the screen; when 'wrap' on go to the
leftmost non-white character of the current
screen line
|g_| g_ 1 cursor to the last CHAR N - 1 lines lower
|ga| ga print ascii value of character under the
cursor
|gd| gd 1 go to definition of word under the cursor
in current function
|ge| ge 1 go backwards to the end of the previous
word
|gf| gf start editing the file whose name is under
the cursor
|gF| gF start editing the file whose name is under
the cursor and jump to the line number
following the filename.
|gg| gg 1 cursor to line N, default first line
|gh| gh start Select mode
|gi| gi 2 like "i", but first move to the |'^| mark
|gj| gj 1 like "j", but when 'wrap' on go N screen
lines down
|gk| gk 1 like "k", but when 'wrap' on go N screen
lines up
|gn| gn 1,2 find the next match with the last used
search pattern and Visually select it
|gm| gm 1 go to character at middle of the screenline
|go| go 1 cursor to byte N in the buffer
|gp| ["x]gp 2 put the text [from register x] after the
cursor N times, leave the cursor after it
|gq| gq{motion} 2 format Nmove text
|gr| gr{char} 2 virtual replace N chars with {char}
|gs| gs go to sleep for N seconds (default 1)
|gt| gt go to the next tab page
|gu| gu{motion} 2 make Nmove text lowercase
|gv| gv reselect the previous Visual area
|gw| gw{motion} 2 format Nmove text and keep cursor
|netrw-gx| gx execute application for file name under the
cursor (only with |netrw| plugin)
|g@| g@{motion} call 'operatorfunc'
|g~| g~{motion} 2 swap case for Nmove text
|g<Down>| g<Down> 1 same as "gj"
|g<End>| g<End> 1 same as "g$"
|g<Home>| g<Home> 1 same as "g0"
|g<LeftMouse>| g<LeftMouse> same as <C-LeftMouse>
g<MiddleMouse> same as <C-MiddleMouse>
|g<RightMouse>| g<RightMouse> same as <C-RightMouse>
|g<Up>| g<Up> 1 same as "gk"
==============================================================================
2.5 Commands starting with 'z' *z*
tag char note action in Normal mode ~
------------------------------------------------------------------------------
|z<CR>| z<CR> redraw, cursor line to top of window,
cursor on first non-blank
|zN<CR>| z{height}<CR> redraw, make window {height} lines high
|z+| z+ cursor on line N (default line below
window), otherwise like "z<CR>"
|z-| z- redraw, cursor line at bottom of window,
cursor on first non-blank
|z.| z. redraw, cursor line to center of window,
cursor on first non-blank
|z=| z= give spelling suggestions
|zA| zA open a closed fold or close an open fold
recursively
|zC| zC close folds recursively
|zD| zD delete folds recursively
|zE| zE eliminate all folds
|zF| zF create a fold for N lines
|zG| zG mark word as good spelled word
|zH| zH when 'wrap' off scroll half a screenwidth
to the right
|zL| zL when 'wrap' off scroll half a screenwidth
to the left
|zM| zM set 'foldlevel' to zero
|zN| zN set 'foldenable'
|zO| zO open folds recursively
|zR| zR set 'foldlevel' to the deepest fold
|zW| zW mark word as wrong (bad) spelled word
|zX| zX re-apply 'foldlevel'
|z^| z^ cursor on line N (default line above
window), otherwise like "z-"
|za| za open a closed fold, close an open fold
|zb| zb redraw, cursor line at bottom of window
|zc| zc close a fold
|zd| zd delete a fold
|ze| ze when 'wrap' off scroll horizontally to
position the cursor at the end (right side)
of the screen
|zf| zf{motion} create a fold for Nmove text
|zg| zg mark word as good spelled word
|zh| zh when 'wrap' off scroll screen N characters
to the right
|zi| zi toggle 'foldenable'
|zj| zj 1 move to the start of the next fold
|zk| zk 1 move to the end of the previous fold
|zl| zl when 'wrap' off scroll screen N characters
to the left
|zm| zm subtract one from 'foldlevel'
|zn| zn reset 'foldenable'
|zo| zo open fold
|zr| zr add one to 'foldlevel'
|zs| zs when 'wrap' off scroll horizontally to
position the cursor at the start (left
side) of the screen
|zt| zt redraw, cursor line at top of window
|zv| zv open enough folds to view the cursor line
|zw| zw mark word as wrong (bad) spelled word
|zx| zx re-apply 'foldlevel' and do "zv"
|zz| zz redraw, cursor line at center of window
|z<Left>| z<Left> same as "zh"
|z<Right>| z<Right> same as "zl"
==============================================================================
3. Visual mode *visual-index*
Most commands in Visual mode are the same as in Normal mode. The ones listed
here are those that are different.
tag command note action in Visual mode ~
------------------------------------------------------------------------------
|v_CTRL-\_CTRL-N| CTRL-\ CTRL-N stop Visual mode
|v_CTRL-\_CTRL-G| CTRL-\ CTRL-G go to mode specified with 'insertmode'
|v_CTRL-A| CTRL-A 2 add N to number in highlighted text
|v_CTRL-C| CTRL-C stop Visual mode
|v_CTRL-G| CTRL-G toggle between Visual mode and Select mode
|v_<BS>| <BS> 2 Select mode: delete highlighted area
|v_CTRL-H| CTRL-H 2 same as <BS>
|v_CTRL-O| CTRL-O switch from Select to Visual mode for one
command
|v_CTRL-V| CTRL-V make Visual mode blockwise or stop Visual
mode
|v_CTRL-X| CTRL-X 2 subtract N from number in highlighted text
|v_<Esc>| <Esc> stop Visual mode
|v_CTRL-]| CTRL-] jump to highlighted tag
|v_!| !{filter} 2 filter the highlighted lines through the
external command {filter}
|v_:| : start a command-line with the highlighted
lines as a range
|v_<| < 2 shift the highlighted lines one
'shiftwidth' left
|v_=| = 2 filter the highlighted lines through the
external program given with the 'equalprg'
option
|v_>| > 2 shift the highlighted lines one
'shiftwidth' right
|v_b_A| A 2 block mode: append same text in all lines,
after the highlighted area
|v_C| C 2 delete the highlighted lines and start
insert
|v_D| D 2 delete the highlighted lines
|v_b_I| I 2 block mode: insert same text in all lines,
before the highlighted area
|v_J| J 2 join the highlighted lines
|v_K| K run 'keywordprg' on the highlighted area
|v_O| O Move horizontally to other corner of area.
Q does not start Ex mode
|v_R| R 2 delete the highlighted lines and start
insert
|v_S| S 2 delete the highlighted lines and start
insert
|v_U| U 2 make highlighted area uppercase
|v_V| V make Visual mode linewise or stop Visual
mode
|v_X| X 2 delete the highlighted lines
|v_Y| Y yank the highlighted lines
|v_aquote| a" extend highlighted area with a double
quoted string
|v_a'| a' extend highlighted area with a single
quoted string
|v_a(| a( same as ab
|v_a)| a) same as ab
|v_a<| a< extend highlighted area with a <> block
|v_a>| a> same as a<
|v_aB| aB extend highlighted area with a {} block
|v_aW| aW extend highlighted area with "a WORD"
|v_a[| a[ extend highlighted area with a [] block
|v_a]| a] same as a[
|v_a`| a` extend highlighted area with a backtick
quoted string
|v_ab| ab extend highlighted area with a () block
|v_ap| ap extend highlighted area with a paragraph
|v_as| as extend highlighted area with a sentence
|v_at| at extend highlighted area with a tag block
|v_aw| aw extend highlighted area with "a word"
|v_a{| a{ same as aB
|v_a}| a} same as aB
|v_c| c 2 delete highlighted area and start insert
|v_d| d 2 delete highlighted area
|v_g_CTRL-A| g CTRL-A 2 add N to number in highlighted text
|v_g_CTRL-X| g CTRL-X 2 subtract N from number in highlighted text
|v_gJ| gJ 2 join the highlighted lines without
inserting spaces
|v_gq| gq 2 format the highlighted lines
|v_gv| gv exchange current and previous highlighted
area
|v_iquote| i" extend highlighted area with a double
quoted string (without quotes)
|v_i'| i' extend highlighted area with a single
quoted string (without quotes)
|v_i(| i( same as ib
|v_i)| i) same as ib
|v_i<| i< extend highlighted area with inner <> block
|v_i>| i> same as i<
|v_iB| iB extend highlighted area with inner {} block
|v_iW| iW extend highlighted area with "inner WORD"
|v_i[| i[ extend highlighted area with inner [] block
|v_i]| i] same as i[
|v_i`| i` extend highlighted area with a backtick
quoted string (without the backticks)
|v_ib| ib extend highlighted area with inner () block
|v_ip| ip extend highlighted area with inner paragraph
|v_is| is extend highlighted area with inner sentence
|v_it| it extend highlighted area with inner tag block
|v_iw| iw extend highlighted area with "inner word"
|v_i{| i{ same as iB
|v_i}| i} same as iB
|v_o| o move cursor to other corner of area
|v_r| r 2 replace highlighted area with a character
|v_s| s 2 delete highlighted area and start insert
|v_u| u 2 make highlighted area lowercase
|v_v| v make Visual mode characterwise or stop
Visual mode
|v_x| x 2 delete the highlighted area
|v_y| y yank the highlighted area
|v_~| ~ 2 swap case for the highlighted area
==============================================================================
4. Command-line editing *ex-edit-index*
Get to the command-line with the ':', '!', '/' or '?' commands.
Normal characters are inserted at the current cursor position.
"Completion" below refers to context-sensitive completion. It will complete
file names, tags, commands etc. as appropriate.
tag command action in Command-line editing mode ~
------------------------------------------------------------------------------
CTRL-@ not used
|c_CTRL-A| CTRL-A do completion on the pattern in front of the
cursor and insert all matches
|c_CTRL-B| CTRL-B cursor to begin of command-line
|c_CTRL-C| CTRL-C same as <Esc>
|c_CTRL-D| CTRL-D list completions that match the pattern in
front of the cursor
|c_CTRL-E| CTRL-E cursor to end of command-line
|'cedit'| CTRL-F default value for 'cedit': opens the
command-line window; otherwise not used
|c_CTRL-G| CTRL-G next match when 'incsearch' is active
|c_<BS>| <BS> delete the character in front of the cursor
|c_digraph| {char1} <BS> {char2}
enter digraph when 'digraph' is on
|c_CTRL-H| CTRL-H same as <BS>
|c_<Tab>| <Tab> if 'wildchar' is <Tab>: Do completion on
the pattern in front of the cursor
|c_<S-Tab>| <S-Tab> same as CTRL-P
|c_wildchar| 'wildchar' Do completion on the pattern in front of the
cursor (default: <Tab>)
|c_CTRL-I| CTRL-I same as <Tab>
|c_<NL>| <NL> same as <CR>
|c_CTRL-J| CTRL-J same as <CR>
|c_CTRL-K| CTRL-K {char1} {char2}
enter digraph
|c_CTRL-L| CTRL-L do completion on the pattern in front of the
cursor and insert the longest common part
|c_<CR>| <CR> execute entered command
|c_CTRL-M| CTRL-M same as <CR>
|c_CTRL-N| CTRL-N after using 'wildchar' with multiple matches:
go to next match, otherwise: recall older
command-line from history.
CTRL-O not used
|c_CTRL-P| CTRL-P after using 'wildchar' with multiple matches:
go to previous match, otherwise: recall older
command-line from history.
|c_CTRL-Q| CTRL-Q same as CTRL-V, unless it's used for terminal
control flow
|c_CTRL-R| CTRL-R {0-9a-z"%#*:= CTRL-F CTRL-P CTRL-W CTRL-A}
insert the contents of a register or object
under the cursor as if typed
|c_CTRL-R_CTRL-R| CTRL-R CTRL-R {0-9a-z"%#*:= CTRL-F CTRL-P CTRL-W CTRL-A}
insert the contents of a register or object
under the cursor literally
CTRL-S (used for terminal control flow)
|c_CTRL-T| CTRL-T previous match when 'incsearch' is active
|c_CTRL-U| CTRL-U remove all characters
|c_CTRL-V| CTRL-V insert next non-digit literally, insert three
digit decimal number as a single byte.
|c_CTRL-W| CTRL-W delete the word in front of the cursor
CTRL-X not used (reserved for completion)
CTRL-Y copy (yank) modeless selection
CTRL-Z not used (reserved for suspend)
|c_<Esc>| <Esc> abandon command-line without executing it
|c_CTRL-[| CTRL-[ same as <Esc>
|c_CTRL-\_CTRL-N| CTRL-\ CTRL-N go to Normal mode, abandon command-line
|c_CTRL-\_CTRL-G| CTRL-\ CTRL-G go to mode specified with 'insertmode',
abandon command-line
CTRL-\ a - d reserved for extensions
|c_CTRL-\_e| CTRL-\ e {expr} replace the command line with the result of
{expr}
CTRL-\ f - z reserved for extensions
CTRL-\ others not used
|c_CTRL-]| CTRL-] trigger abbreviation
|c_CTRL-^| CTRL-^ toggle use of |:lmap| mappings
|c_CTRL-_| CTRL-_ when 'allowrevins' set: change language
(Hebrew, Farsi)
|c_<Del>| <Del> delete the character under the cursor
|c_<Left>| <Left> cursor left
|c_<S-Left>| <S-Left> cursor one word left
|c_<C-Left>| <C-Left> cursor one word left
|c_<Right>| <Right> cursor right
|c_<S-Right>| <S-Right> cursor one word right
|c_<C-Right>| <C-Right> cursor one word right
|c_<Up>| <Up> recall previous command-line from history that
matches pattern in front of the cursor
|c_<S-Up>| <S-Up> recall previous command-line from history
|c_<Down>| <Down> recall next command-line from history that
matches pattern in front of the cursor
|c_<S-Down>| <S-Down> recall next command-line from history
|c_<Home>| <Home> cursor to start of command-line
|c_<End>| <End> cursor to end of command-line
|c_<PageDown>| <PageDown> same as <S-Down>
|c_<PageUp>| <PageUp> same as <S-Up>
|c_<Insert>| <Insert> toggle insert/overstrike mode
|c_<LeftMouse>| <LeftMouse> cursor at mouse click
You found it, Arthur! *holy-grail* *:smile*
==============================================================================
5. EX commands *ex-cmd-index* *:index*
This is a brief but complete listing of all the ":" commands, without
mentioning any arguments. The optional part of the command name is inside [].
The commands are sorted on the non-optional part of their name.
tag command action ~
------------------------------------------------------------------------------
|:!| :! filter lines or execute an external command
|:!!| :!! repeat last ":!" command
|:#| :# same as ":number"
|:&| :& repeat last ":substitute"
|:star| :* execute contents of a register
|:<| :< shift lines one 'shiftwidth' left
|:=| := print the cursor line number
|:>| :> shift lines one 'shiftwidth' right
|:@| :@ execute contents of a register
|:@@| :@@ repeat the previous ":@"
|:Next| :N[ext] go to previous file in the argument list
|:Print| :P[rint] print lines
|:X| :X ask for encryption key
|:append| :a[ppend] append text
|:abbreviate| :ab[breviate] enter abbreviation
|:abclear| :abc[lear] remove all abbreviations
|:aboveleft| :abo[veleft] make split window appear left or above
|:all| :al[l] open a window for each file in the argument
list
|:amenu| :am[enu] enter new menu item for all modes
|:anoremenu| :an[oremenu] enter a new menu for all modes that will not
be remapped
|:args| :ar[gs] print the argument list
|:argadd| :arga[dd] add items to the argument list
|:argdelete| :argd[elete] delete items from the argument list
|:argedit| :arge[dit] add item to the argument list and edit it
|:argdo| :argdo do a command on all items in the argument list
|:argglobal| :argg[lobal] define the global argument list
|:arglocal| :argl[ocal] define a local argument list
|:argument| :argu[ment] go to specific file in the argument list
|:ascii| :as[cii] print ascii value of character under the cursor
|:autocmd| :au[tocmd] enter or show autocommands
|:augroup| :aug[roup] select the autocommand group to use
|:aunmenu| :aun[menu] remove menu for all modes
|:buffer| :b[uffer] go to specific buffer in the buffer list
|:bNext| :bN[ext] go to previous buffer in the buffer list
|:ball| :ba[ll] open a window for each buffer in the buffer list
|:badd| :bad[d] add buffer to the buffer list
|:bdelete| :bd[elete] remove a buffer from the buffer list
|:behave| :be[have] set mouse and selection behavior
|:belowright| :bel[owright] make split window appear right or below
|:bfirst| :bf[irst] go to first buffer in the buffer list
|:blast| :bl[ast] go to last buffer in the buffer list
|:bmodified| :bm[odified] go to next buffer in the buffer list that has
been modified
|:bnext| :bn[ext] go to next buffer in the buffer list
|:botright| :bo[tright] make split window appear at bottom or far right
|:bprevious| :bp[revious] go to previous buffer in the buffer list
|:brewind| :br[ewind] go to first buffer in the buffer list
|:break| :brea[k] break out of while loop
|:breakadd| :breaka[dd] add a debugger breakpoint
|:breakdel| :breakd[el] delete a debugger breakpoint
|:breaklist| :breakl[ist] list debugger breakpoints
|:browse| :bro[wse] use file selection dialog
|:bufdo| :bufdo execute command in each listed buffer
|:buffers| :buffers list all files in the buffer list
|:bunload| :bun[load] unload a specific buffer
|:bwipeout| :bw[ipeout] really delete a buffer
|:change| :c[hange] replace a line or series of lines
|:cNext| :cN[ext] go to previous error
|:cNfile| :cNf[ile] go to last error in previous file
|:cabbrev| :ca[bbrev] like ":abbreviate" but for Command-line mode
|:cabclear| :cabc[lear] clear all abbreviations for Command-line mode
|:caddbuffer| :cad[dbuffer] add errors from buffer
|:caddexpr| :cadde[xpr] add errors from expr
|:caddfile| :caddf[ile] add error message to current quickfix list
|:call| :cal[l] call a function
|:catch| :cat[ch] part of a :try command
|:cbottom| :cbo[ttom] scroll to the bottom of the quickfix window
|:cbuffer| :cb[uffer] parse error messages and jump to first error
|:cc| :cc go to specific error
|:cclose| :ccl[ose] close quickfix window
|:cd| :cd change directory
|:cdo| :cdo execute command in each valid error list entry
|:cfdo| :cfd[o] execute command in each file in error list
|:center| :ce[nter] format lines at the center
|:cexpr| :cex[pr] read errors from expr and jump to first
|:cfile| :cf[ile] read file with error messages and jump to first
|:cfirst| :cfir[st] go to the specified error, default first one
|:cgetbuffer| :cgetb[uffer] get errors from buffer
|:cgetexpr| :cgete[xpr] get errors from expr
|:cgetfile| :cg[etfile] read file with error messages
|:changes| :changes print the change list
|:chdir| :chd[ir] change directory
|:checkpath| :che[ckpath] list included files
|:checktime| :checkt[ime] check timestamp of loaded buffers
|:chistory| :chi[story] list the error lists
|:clast| :cla[st] go to the specified error, default last one
|:clearjumps| :cle[arjumps] clear the jump list
|:clist| :cl[ist] list all errors
|:close| :clo[se] close current window
|:cmap| :cm[ap] like ":map" but for Command-line mode
|:cmapclear| :cmapc[lear] clear all mappings for Command-line mode
|:cmenu| :cme[nu] add menu for Command-line mode
|:cnext| :cn[ext] go to next error
|:cnewer| :cnew[er] go to newer error list
|:cnfile| :cnf[ile] go to first error in next file
|:cnoremap| :cno[remap] like ":noremap" but for Command-line mode
|:cnoreabbrev| :cnorea[bbrev] like ":noreabbrev" but for Command-line mode
|:cnoremenu| :cnoreme[nu] like ":noremenu" but for Command-line mode
|:copy| :co[py] copy lines
|:colder| :col[der] go to older error list
|:colorscheme| :colo[rscheme] load a specific color scheme
|:command| :com[mand] create user-defined command
|:comclear| :comc[lear] clear all user-defined commands
|:compiler| :comp[iler] do settings for a specific compiler
|:continue| :con[tinue] go back to :while
|:confirm| :conf[irm] prompt user when confirmation required
|:copen| :cope[n] open quickfix window
|:cprevious| :cp[revious] go to previous error
|:cpfile| :cpf[ile] go to last error in previous file
|:cquit| :cq[uit] quit Vim with an error code
|:crewind| :cr[ewind] go to the specified error, default first one
|:cscope| :cs[cope] execute cscope command
|:cstag| :cst[ag] use cscope to jump to a tag
|:cunmap| :cu[nmap] like ":unmap" but for Command-line mode
|:cunabbrev| :cuna[bbrev] like ":unabbrev" but for Command-line mode
|:cunmenu| :cunme[nu] remove menu for Command-line mode
|:cwindow| :cw[indow] open or close quickfix window
|:delete| :d[elete] delete lines
|:delmarks| :delm[arks] delete marks
|:debug| :deb[ug] run a command in debugging mode
|:debuggreedy| :debugg[reedy] read debug mode commands from normal input
|:delcommand| :delc[ommand] delete user-defined command
|:delfunction| :delf[unction] delete a user function
|:diffupdate| :dif[fupdate] update 'diff' buffers
|:diffget| :diffg[et] remove differences in current buffer
|:diffoff| :diffo[ff] switch off diff mode
|:diffpatch| :diffp[atch] apply a patch and show differences
|:diffput| :diffpu[t] remove differences in other buffer
|:diffsplit| :diffs[plit] show differences with another file
|:diffthis| :diffthis make current window a diff window
|:digraphs| :dig[raphs] show or enter digraphs
|:display| :di[splay] display registers
|:djump| :dj[ump] jump to #define
|:dl| :dl short for |:delete| with the 'l' flag
|:del| :del[ete]l short for |:delete| with the 'l' flag
|:dlist| :dli[st] list #defines
|:doautocmd| :do[autocmd] apply autocommands to current buffer
|:doautoall| :doautoa[ll] apply autocommands for all loaded buffers
|:dp| :d[elete]p short for |:delete| with the 'p' flag
|:drop| :dr[op] jump to window editing file or edit file in
current window
|:dsearch| :ds[earch] list one #define
|:dsplit| :dsp[lit] split window and jump to #define
|:edit| :e[dit] edit a file
|:earlier| :ea[rlier] go to older change, undo
|:echo| :ec[ho] echoes the result of expressions
|:echoerr| :echoe[rr] like :echo, show like an error and use history
|:echohl| :echoh[l] set highlighting for echo commands
|:echomsg| :echom[sg] same as :echo, put message in history
|:echon| :echon same as :echo, but without <EOL>
|:else| :el[se] part of an :if command
|:elseif| :elsei[f] part of an :if command
|:emenu| :em[enu] execute a menu by name
|:endif| :en[dif] end previous :if
|:endfor| :endfo[r] end previous :for
|:endfunction| :endf[unction] end of a user function
|:endtry| :endt[ry] end previous :try
|:endwhile| :endw[hile] end previous :while
|:enew| :ene[w] edit a new, unnamed buffer
|:ex| :ex same as ":edit"
|:execute| :exe[cute] execute result of expressions
|:exit| :exi[t] same as ":xit"
|:exusage| :exu[sage] overview of Ex commands
|:file| :f[ile] show or set the current file name
|:files| :files list all files in the buffer list
|:filetype| :filet[ype] switch file type detection on/off
|:filter| :filt[er] filter output of following command
|:find| :fin[d] find file in 'path' and edit it
|:finally| :fina[lly] part of a :try command
|:finish| :fini[sh] quit sourcing a Vim script
|:first| :fir[st] go to the first file in the argument list
|:fixdel| :fix[del] set key code of <Del>
|:fold| :fo[ld] create a fold
|:foldclose| :foldc[lose] close folds
|:folddoopen| :foldd[oopen] execute command on lines not in a closed fold
|:folddoclosed| :folddoc[losed] execute command on lines in a closed fold
|:foldopen| :foldo[pen] open folds
|:for| :for for loop
|:function| :fu[nction] define a user function
|:global| :g[lobal] execute commands for matching lines
|:goto| :go[to] go to byte in the buffer
|:grep| :gr[ep] run 'grepprg' and jump to first match
|:grepadd| :grepa[dd] like :grep, but append to current list
|:gui| :gu[i] start the GUI
|:gvim| :gv[im] start the GUI
|:hardcopy| :ha[rdcopy] send text to the printer
|:help| :h[elp] open a help window
|:helpclose| :helpc[lose] close one help window
|:helpfind| :helpf[ind] dialog to open a help window
|:helpgrep| :helpg[rep] like ":grep" but searches help files
|:helptags| :helpt[ags] generate help tags for a directory
|:highlight| :hi[ghlight] specify highlighting methods
|:hide| :hid[e] hide current buffer for a command
|:history| :his[tory] print a history list
|:insert| :i[nsert] insert text
|:iabbrev| :ia[bbrev] like ":abbrev" but for Insert mode
|:iabclear| :iabc[lear] like ":abclear" but for Insert mode
|:if| :if execute commands when condition met
|:ijump| :ij[ump] jump to definition of identifier
|:ilist| :il[ist] list lines where identifier matches
|:imap| :im[ap] like ":map" but for Insert mode
|:imapclear| :imapc[lear] like ":mapclear" but for Insert mode
|:imenu| :ime[nu] add menu for Insert mode
|:inoremap| :ino[remap] like ":noremap" but for Insert mode
|:inoreabbrev| :inorea[bbrev] like ":noreabbrev" but for Insert mode
|:inoremenu| :inoreme[nu] like ":noremenu" but for Insert mode
|:intro| :int[ro] print the introductory message
|:isearch| :is[earch] list one line where identifier matches
|:isplit| :isp[lit] split window and jump to definition of
identifier
|:iunmap| :iu[nmap] like ":unmap" but for Insert mode
|:iunabbrev| :iuna[bbrev] like ":unabbrev" but for Insert mode
|:iunmenu| :iunme[nu] remove menu for Insert mode
|:join| :j[oin] join lines
|:jumps| :ju[mps] print the jump list
|:k| :k set a mark
|:keepalt| :keepa[lt] following command keeps the alternate file
|:keepmarks| :kee[pmarks] following command keeps marks where they are
|:keepjumps| :keepj[umps] following command keeps jumplist and marks
|:keeppatterns| :keepp[atterns] following command keeps search pattern history
|:lNext| :lN[ext] go to previous entry in location list
|:lNfile| :lNf[ile] go to last entry in previous file
|:list| :l[ist] print lines
|:laddexpr| :lad[dexpr] add locations from expr
|:laddbuffer| :laddb[uffer] add locations from buffer
|:laddfile| :laddf[ile] add locations to current location list
|:last| :la[st] go to the last file in the argument list
|:language| :lan[guage] set the language (locale)
|:later| :lat[er] go to newer change, redo
|:lbottom| :lbo[ttom] scroll to the bottom of the location window
|:lbuffer| :lb[uffer] parse locations and jump to first location
|:lcd| :lc[d] change directory locally
|:lchdir| :lch[dir] change directory locally
|:lclose| :lcl[ose] close location window
|:lcscope| :lcs[cope] like ":cscope" but uses location list
|:ldo| :ld[o] execute command in valid location list entries
|:lfdo| :lfd[o] execute command in each file in location list
|:left| :le[ft] left align lines
|:leftabove| :lefta[bove] make split window appear left or above
|:let| :let assign a value to a variable or option
|:lexpr| :lex[pr] read locations from expr and jump to first
|:lfile| :lf[ile] read file with locations and jump to first
|:lfirst| :lfir[st] go to the specified location, default first one
|:lgetbuffer| :lgetb[uffer] get locations from buffer
|:lgetexpr| :lgete[xpr] get locations from expr
|:lgetfile| :lg[etfile] read file with locations
|:lgrep| :lgr[ep] run 'grepprg' and jump to first match
|:lgrepadd| :lgrepa[dd] like :grep, but append to current list
|:lhelpgrep| :lh[elpgrep] like ":helpgrep" but uses location list
|:lhistory| :lhi[story] list the location lists
|:ll| :ll go to specific location
|:llast| :lla[st] go to the specified location, default last one
|:llist| :lli[st] list all locations
|:lmake| :lmak[e] execute external command 'makeprg' and parse
error messages
|:lmap| :lm[ap] like ":map!" but includes Lang-Arg mode
|:lmapclear| :lmapc[lear] like ":mapclear!" but includes Lang-Arg mode
|:lnext| :lne[xt] go to next location
|:lnewer| :lnew[er] go to newer location list
|:lnfile| :lnf[ile] go to first location in next file
|:lnoremap| :ln[oremap] like ":noremap!" but includes Lang-Arg mode
|:loadkeymap| :loadk[eymap] load the following keymaps until EOF
|:loadview| :lo[adview] load view for current window from a file
|:lockmarks| :loc[kmarks] following command keeps marks where they are
|:lockvar| :lockv[ar] lock variables
|:lolder| :lol[der] go to older location list
|:lopen| :lope[n] open location window
|:lprevious| :lp[revious] go to previous location
|:lpfile| :lpf[ile] go to last location in previous file
|:lrewind| :lr[ewind] go to the specified location, default first one
|:ls| :ls list all buffers
|:ltag| :lt[ag] jump to tag and add matching tags to the
location list
|:lunmap| :lu[nmap] like ":unmap!" but includes Lang-Arg mode
|:lua| :lua execute |Lua| command
|:luado| :luad[o] execute Lua command for each line
|:luafile| :luaf[ile] execute |Lua| script file
|:lvimgrep| :lv[imgrep] search for pattern in files
|:lvimgrepadd| :lvimgrepa[dd] like :vimgrep, but append to current list
|:lwindow| :lw[indow] open or close location window
|:move| :m[ove] move lines
|:mark| :ma[rk] set a mark
|:make| :mak[e] execute external command 'makeprg' and parse
error messages
|:map| :map show or enter a mapping
|:mapclear| :mapc[lear] clear all mappings for Normal and Visual mode
|:marks| :marks list all marks
|:match| :mat[ch] define a match to highlight
|:menu| :me[nu] enter a new menu item
|:menutranslate| :menut[ranslate] add a menu translation item
|:messages| :mes[sages] view previously displayed messages
|:mkexrc| :mk[exrc] write current mappings and settings to a file
|:mksession| :mks[ession] write session info to a file
|:mkspell| :mksp[ell] produce .spl spell file
|:mkvimrc| :mkv[imrc] write current mappings and settings to a file
|:mkview| :mkvie[w] write view of current window to a file
|:mode| :mod[e] show or change the screen mode
|:mzscheme| :mz[scheme] execute MzScheme command
|:mzfile| :mzf[ile] execute MzScheme script file
|:nbclose| :nbc[lose] close the current Netbeans session
|:nbkey| :nb[key] pass a key to Netbeans
|:nbstart| :nbs[art] start a new Netbeans session
|:next| :n[ext] go to next file in the argument list
|:new| :new create a new empty window
|:nmap| :nm[ap] like ":map" but for Normal mode
|:nmapclear| :nmapc[lear] clear all mappings for Normal mode
|:nmenu| :nme[nu] add menu for Normal mode
|:nnoremap| :nn[oremap] like ":noremap" but for Normal mode
|:nnoremenu| :nnoreme[nu] like ":noremenu" but for Normal mode
|:noautocmd| :noa[utocmd] following commands don't trigger autocommands
|:noremap| :no[remap] enter a mapping that will not be remapped
|:nohlsearch| :noh[lsearch] suspend 'hlsearch' highlighting
|:noreabbrev| :norea[bbrev] enter an abbreviation that will not be
remapped
|:noremenu| :noreme[nu] enter a menu that will not be remapped
|:normal| :norm[al] execute Normal mode commands
|:noswapfile| :nos[wapfile] following commands don't create a swap file
|:number| :nu[mber] print lines with line number
|:nunmap| :nun[map] like ":unmap" but for Normal mode
|:nunmenu| :nunme[nu] remove menu for Normal mode
|:oldfiles| :ol[dfiles] list files that have marks in the viminfo file
|:open| :o[pen] start open mode (not implemented)
|:omap| :om[ap] like ":map" but for Operator-pending mode
|:omapclear| :omapc[lear] remove all mappings for Operator-pending mode
|:omenu| :ome[nu] add menu for Operator-pending mode
|:only| :on[ly] close all windows except the current one
|:onoremap| :ono[remap] like ":noremap" but for Operator-pending mode
|:onoremenu| :onoreme[nu] like ":noremenu" but for Operator-pending mode
|:options| :opt[ions] open the options-window
|:ounmap| :ou[nmap] like ":unmap" but for Operator-pending mode
|:ounmenu| :ounme[nu] remove menu for Operator-pending mode
|:ownsyntax| :ow[nsyntax] set new local syntax highlight for this window
|:packadd| :pa[ckadd] add a plugin from 'packpath'
|:packloadall| :packl[oadall] load all packages under 'packpath'
|:pclose| :pc[lose] close preview window
|:pedit| :ped[it] edit file in the preview window
|:perl| :pe[rl] execute Perl command
|:print| :p[rint] print lines
|:profdel| :profd[el] stop profiling a function or script
|:profile| :prof[ile] profiling functions and scripts
|:promptfind| :pro[mptfind] open GUI dialog for searching
|:promptrepl| :promptr[epl] open GUI dialog for search/replace
|:perldo| :perld[o] execute Perl command for each line
|:pop| :po[p] jump to older entry in tag stack
|:popup| :popu[p] popup a menu by name
|:ppop| :pp[op] ":pop" in preview window
|:preserve| :pre[serve] write all text to swap file
|:previous| :prev[ious] go to previous file in argument list
|:psearch| :ps[earch] like ":ijump" but shows match in preview window
|:ptag| :pt[ag] show tag in preview window
|:ptNext| :ptN[ext] |:tNext| in preview window
|:ptfirst| :ptf[irst] |:trewind| in preview window
|:ptjump| :ptj[ump] |:tjump| and show tag in preview window
|:ptlast| :ptl[ast] |:tlast| in preview window
|:ptnext| :ptn[ext] |:tnext| in preview window
|:ptprevious| :ptp[revious] |:tprevious| in preview window
|:ptrewind| :ptr[ewind] |:trewind| in preview window
|:ptselect| :pts[elect] |:tselect| and show tag in preview window
|:put| :pu[t] insert contents of register in the text
|:pwd| :pw[d] print current directory
|:py3| :py3 execute Python 3 command
|:python3| :python3 same as :py3
|:py3do| :py3d[o] execute Python 3 command for each line
|:py3file| :py3f[ile] execute Python 3 script file
|:python| :py[thon] execute Python command
|:pydo| :pyd[o] execute Python command for each line
|:pyfile| :pyf[ile] execute Python script file
|:pyx| :pyx execute |python_x| command
|:pythonx| :pythonx same as :pyx
|:pyxdo| :pyxd[o] execute |python_x| command for each line
|:pyxfile| :pyxf[ile] execute |python_x| script file
|:quit| :q[uit] quit current window (when one window quit Vim)
|:quitall| :quita[ll] quit Vim
|:qall| :qa[ll] quit Vim
|:read| :r[ead] read file into the text
|:recover| :rec[over] recover a file from a swap file
|:redo| :red[o] redo one undone change
|:redir| :redi[r] redirect messages to a file or register
|:redraw| :redr[aw] force a redraw of the display
|:redrawstatus| :redraws[tatus] force a redraw of the status line(s)
|:registers| :reg[isters] display the contents of registers
|:resize| :res[ize] change current window height
|:retab| :ret[ab] change tab size
|:return| :retu[rn] return from a user function
|:rewind| :rew[ind] go to the first file in the argument list
|:right| :ri[ght] right align text
|:rightbelow| :rightb[elow] make split window appear right or below
|:ruby| :rub[y] execute Ruby command
|:rubydo| :rubyd[o] execute Ruby command for each line
|:rubyfile| :rubyf[ile] execute Ruby script file
|:rundo| :rund[o] read undo information from a file
|:runtime| :ru[ntime] source vim scripts in 'runtimepath'
|:rviminfo| :rv[iminfo] read from viminfo file
|:substitute| :s[ubstitute] find and replace text
|:sNext| :sN[ext] split window and go to previous file in
argument list
|:sandbox| :san[dbox] execute a command in the sandbox
|:sargument| :sa[rgument] split window and go to specific file in
argument list
|:sall| :sal[l] open a window for each file in argument list
|:saveas| :sav[eas] save file under another name.
|:sbuffer| :sb[uffer] split window and go to specific file in the
buffer list
|:sbNext| :sbN[ext] split window and go to previous file in the
buffer list
|:sball| :sba[ll] open a window for each file in the buffer list
|:sbfirst| :sbf[irst] split window and go to first file in the
buffer list
|:sblast| :sbl[ast] split window and go to last file in buffer
list
|:sbmodified| :sbm[odified] split window and go to modified file in the
buffer list
|:sbnext| :sbn[ext] split window and go to next file in the buffer
list
|:sbprevious| :sbp[revious] split window and go to previous file in the
buffer list
|:sbrewind| :sbr[ewind] split window and go to first file in the
buffer list
|:scriptnames| :scr[iptnames] list names of all sourced Vim scripts
|:scriptencoding| :scripte[ncoding] encoding used in sourced Vim script
|:scscope| :scs[cope] split window and execute cscope command
|:set| :se[t] show or set options
|:setfiletype| :setf[iletype] set 'filetype', unless it was set already
|:setglobal| :setg[lobal] show global values of options
|:setlocal| :setl[ocal] show or set options locally
|:sfind| :sf[ind] split current window and edit file in 'path'
|:sfirst| :sfir[st] split window and go to first file in the
argument list
|:shell| :sh[ell] escape to a shell
|:simalt| :sim[alt] Win32 GUI: simulate Windows ALT key
|:sign| :sig[n] manipulate signs
|:silent| :sil[ent] run a command silently
|:sleep| :sl[eep] do nothing for a few seconds
|:slast| :sla[st] split window and go to last file in the
argument list
|:smagic| :sm[agic] :substitute with 'magic'
|:smap| :smap like ":map" but for Select mode
|:smapclear| :smapc[lear] remove all mappings for Select mode
|:smenu| :sme[nu] add menu for Select mode
|:smile| :smi[le] make the user happy
|:snext| :sn[ext] split window and go to next file in the
argument list
|:snomagic| :sno[magic] :substitute with 'nomagic'
|:snoremap| :snor[emap] like ":noremap" but for Select mode
|:snoremenu| :snoreme[nu] like ":noremenu" but for Select mode
|:sort| :sor[t] sort lines
|:source| :so[urce] read Vim or Ex commands from a file
|:spelldump| :spelld[ump] split window and fill with all correct words
|:spellgood| :spe[llgood] add good word for spelling
|:spellinfo| :spelli[nfo] show info about loaded spell files
|:spellrepall| :spellr[epall] replace all bad words like last |z=|
|:spellundo| :spellu[ndo] remove good or bad word
|:spellwrong| :spellw[rong] add spelling mistake
|:split| :sp[lit] split current window
|:sprevious| :spr[evious] split window and go to previous file in the
argument list
|:srewind| :sre[wind] split window and go to first file in the
argument list
|:stop| :st[op] suspend the editor or escape to a shell
|:stag| :sta[g] split window and jump to a tag
|:startinsert| :star[tinsert] start Insert mode
|:startgreplace| :startg[replace] start Virtual Replace mode
|:startreplace| :startr[eplace] start Replace mode
|:stopinsert| :stopi[nsert] stop Insert mode
|:stjump| :stj[ump] do ":tjump" and split window
|:stselect| :sts[elect] do ":tselect" and split window
|:sunhide| :sun[hide] same as ":unhide"
|:sunmap| :sunm[ap] like ":unmap" but for Select mode
|:sunmenu| :sunme[nu] remove menu for Select mode
|:suspend| :sus[pend] same as ":stop"
|:sview| :sv[iew] split window and edit file read-only
|:swapname| :sw[apname] show the name of the current swap file
|:syntax| :sy[ntax] syntax highlighting
|:syntime| :synti[me] measure syntax highlighting speed
|:syncbind| :sync[bind] sync scroll binding
|:t| :t same as ":copy"
|:tNext| :tN[ext] jump to previous matching tag
|:tabNext| :tabN[ext] go to previous tab page
|:tabclose| :tabc[lose] close current tab page
|:tabdo| :tabdo execute command in each tab page
|:tabedit| :tabe[dit] edit a file in a new tab page
|:tabfind| :tabf[ind] find file in 'path', edit it in a new tab page
|:tabfirst| :tabfir[st] go to first tab page
|:tablast| :tabl[ast] go to last tab page
|:tabmove| :tabm[ove] move tab page to other position
|:tabnew| :tabnew edit a file in a new tab page
|:tabnext| :tabn[ext] go to next tab page
|:tabonly| :tabo[nly] close all tab pages except the current one
|:tabprevious| :tabp[revious] go to previous tab page
|:tabrewind| :tabr[ewind] go to first tab page
|:tabs| :tabs list the tab pages and what they contain
|:tab| :tab create new tab when opening new window
|:tag| :ta[g] jump to tag
|:tags| :tags show the contents of the tag stack
|:tcl| :tc[l] execute Tcl command
|:tcldo| :tcld[o] execute Tcl command for each line
|:tclfile| :tclf[ile] execute Tcl script file
|:tearoff| :te[aroff] tear-off a menu
|:terminal| :ter[minal] open a terminal window
|:tfirst| :tf[irst] jump to first matching tag
|:throw| :th[row] throw an exception
|:tjump| :tj[ump] like ":tselect", but jump directly when there
is only one match
|:tlast| :tl[ast] jump to last matching tag
|:tmapclear| :tmapc[lear] remove all mappings for Terminal-Job mode
|:tmap| :tma[p] like ":map" but for Terminal-Job mode
|:tmenu| :tm[enu] define menu tooltip
|:tnext| :tn[ext] jump to next matching tag
|:tnoremap| :tno[remap] like ":noremap" but for Terminal-Job mode
|:topleft| :to[pleft] make split window appear at top or far left
|:tprevious| :tp[revious] jump to previous matching tag
|:trewind| :tr[ewind] jump to first matching tag
|:try| :try execute commands, abort on error or exception
|:tselect| :ts[elect] list matching tags and select one
|:tunmap| :tunma[p] like ":unmap" but for Terminal-Job mode
|:tunmenu| :tu[nmenu] remove menu tooltip
|:undo| :u[ndo] undo last change(s)
|:undojoin| :undoj[oin] join next change with previous undo block
|:undolist| :undol[ist] list leafs of the undo tree
|:unabbreviate| :una[bbreviate] remove abbreviation
|:unhide| :unh[ide] open a window for each loaded file in the
buffer list
|:unlet| :unl[et] delete variable
|:unlockvar| :unlo[ckvar] unlock variables
|:unmap| :unm[ap] remove mapping
|:unmenu| :unme[nu] remove menu
|:unsilent| :uns[ilent] run a command not silently
|:update| :up[date] write buffer if modified
|:vglobal| :v[global] execute commands for not matching lines
|:version| :ve[rsion] print version number and other info
|:verbose| :verb[ose] execute command with 'verbose' set
|:vertical| :vert[ical] make following command split vertically
|:vimgrep| :vim[grep] search for pattern in files
|:vimgrepadd| :vimgrepa[dd] like :vimgrep, but append to current list
|:visual| :vi[sual] same as ":edit", but turns off "Ex" mode
|:viusage| :viu[sage] overview of Normal mode commands
|:view| :vie[w] edit a file read-only
|:vmap| :vm[ap] like ":map" but for Visual+Select mode
|:vmapclear| :vmapc[lear] remove all mappings for Visual+Select mode
|:vmenu| :vme[nu] add menu for Visual+Select mode
|:vnew| :vne[w] create a new empty window, vertically split
|:vnoremap| :vn[oremap] like ":noremap" but for Visual+Select mode
|:vnoremenu| :vnoreme[nu] like ":noremenu" but for Visual+Select mode
|:vsplit| :vs[plit] split current window vertically
|:vunmap| :vu[nmap] like ":unmap" but for Visual+Select mode
|:vunmenu| :vunme[nu] remove menu for Visual+Select mode
|:windo| :windo execute command in each window
|:write| :w[rite] write to a file
|:wNext| :wN[ext] write to a file and go to previous file in
argument list
|:wall| :wa[ll] write all (changed) buffers
|:while| :wh[ile] execute loop for as long as condition met
|:winsize| :wi[nsize] get or set window size (obsolete)
|:wincmd| :winc[md] execute a Window (CTRL-W) command
|:winpos| :winp[os] get or set window position
|:wnext| :wn[ext] write to a file and go to next file in
argument list
|:wprevious| :wp[revious] write to a file and go to previous file in
argument list
|:wq| :wq write to a file and quit window or Vim
|:wqall| :wqa[ll] write all changed buffers and quit Vim
|:wsverb| :ws[verb] pass the verb to workshop over IPC
|:wundo| :wu[ndo] write undo information to a file
|:wviminfo| :wv[iminfo] write to viminfo file
|:xit| :x[it] write if buffer changed and quit window or Vim
|:xall| :xa[ll] same as ":wqall"
|:xmapclear| :xmapc[lear] remove all mappings for Visual mode
|:xmap| :xm[ap] like ":map" but for Visual mode
|:xmenu| :xme[nu] add menu for Visual mode
|:xnoremap| :xn[oremap] like ":noremap" but for Visual mode
|:xnoremenu| :xnoreme[nu] like ":noremenu" but for Visual mode
|:xunmap| :xu[nmap] like ":unmap" but for Visual mode
|:xunmenu| :xunme[nu] remove menu for Visual mode
|:yank| :y[ank] yank lines into a register
|:z| :z print some lines
|:~| :~ repeat last ":substitute"
vim:tw=78:ts=8:ft=help:norl: