AlkantarClanX12
Your IP : 18.188.227.64
#!./perl -w
package ExtUtils::Miniperl;
use strict;
require Exporter;
use ExtUtils::Embed 1.31, qw(xsi_header xsi_protos xsi_body);
use vars qw($VERSION @ISA @EXPORT);
@ISA = qw(Exporter);
@EXPORT = qw(writemain);
$VERSION = '1.06';
# blead will run this with miniperl, hence we can't use autodie or File::Temp
my $temp;
END {
return if !defined $temp || !-e $temp;
unlink $temp or warn "Can't unlink '$temp': $!";
}
sub writemain{
my ($fh, $real);
if (ref $_[0] eq 'SCALAR') {
$real = ${+shift};
$temp = $real;
$temp =~ s/(?:.c)?\z/.new/;
open $fh, '>', $temp
or die "Can't open '$temp' for writing: $!";
} elsif (ref $_[0]) {
$fh = shift;
} else {
$fh = \*STDOUT;
}
my(@exts) = @_;
printf $fh <<'EOF!HEAD', xsi_header();
/* miniperlmain.c or perlmain.c - a generated file
*
* Copyright (C) 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003,
* 2004, 2005, 2006, 2007, 2016 by Larry Wall and others
*
* You may distribute under the terms of either the GNU General Public
* License or the Artistic License, as specified in the README file.
*
*/
/*
* The Road goes ever on and on
* Down from the door where it began.
*
* [Bilbo on p.35 of _The Lord of the Rings_, I/i: "A Long-Expected Party"]
* [Frodo on p.73 of _The Lord of the Rings_, I/iii: "Three Is Company"]
*/
/* This file contains the main() function for the perl interpreter.
* Note that miniperlmain.c contains main() for the 'miniperl' binary,
* while perlmain.c contains main() for the 'perl' binary. The typical
* difference being that the latter includes Dynaloader.
*
* Miniperl is like perl except that it does not support dynamic loading,
* and in fact is used to build the dynamic modules needed for the 'real'
* perl executable.
*
* The content of the body of this generated file is mostly contained
* in Miniperl.pm - edit that file if you want to change anything.
* miniperlmain.c is generated by running regen/miniperlmain.pl.pl, while
* perlmain.c is built automatically by Makefile (so the former is
* included in the tarball while the latter isn't).
*/
#ifdef OEMVS
#ifdef MYMALLOC
/* sbrk is limited to first heap segment so make it big */
#pragma runopts(HEAP(8M,500K,ANYWHERE,KEEP,8K,4K) STACK(,,ANY,) ALL31(ON))
#else
#pragma runopts(HEAP(2M,500K,ANYWHERE,KEEP,8K,4K) STACK(,,ANY,) ALL31(ON))
#endif
#endif
#define PERL_IN_MINIPERLMAIN_C
%s
static void xs_init (pTHX);
static PerlInterpreter *my_perl;
#if defined(PERL_GLOBAL_STRUCT_PRIVATE)
/* The static struct perl_vars* may seem counterproductive since the
* whole idea PERL_GLOBAL_STRUCT_PRIVATE was to avoid statics, but note
* that this static is not in the shared perl library, the globals PL_Vars
* and PL_VarsPtr will stay away. */
static struct perl_vars* my_plvarsp;
struct perl_vars* Perl_GetVarsPrivate(void) { return my_plvarsp; }
#endif
#ifdef NO_ENV_ARRAY_IN_MAIN
extern char **environ;
int
main(int argc, char **argv)
#else
int
main(int argc, char **argv, char **env)
#endif
{
int exitstatus, i;
#ifdef PERL_GLOBAL_STRUCT
struct perl_vars *my_vars = init_global_struct();
# ifdef PERL_GLOBAL_STRUCT_PRIVATE
int veto;
my_plvarsp = my_vars;
# endif
#endif /* PERL_GLOBAL_STRUCT */
#ifndef NO_ENV_ARRAY_IN_MAIN
PERL_UNUSED_ARG(env);
#endif
#ifndef PERL_USE_SAFE_PUTENV
PL_use_safe_putenv = FALSE;
#endif /* PERL_USE_SAFE_PUTENV */
/* if user wants control of gprof profiling off by default */
/* noop unless Configure is given -Accflags=-DPERL_GPROF_CONTROL */
PERL_GPROF_MONCONTROL(0);
#ifdef NO_ENV_ARRAY_IN_MAIN
PERL_SYS_INIT3(&argc,&argv,&environ);
#else
PERL_SYS_INIT3(&argc,&argv,&env);
#endif
#if defined(USE_ITHREADS)
/* XXX Ideally, this should really be happening in perl_alloc() or
* perl_construct() to keep libperl.a transparently fork()-safe.
* It is currently done here only because Apache/mod_perl have
* problems due to lack of a call to cancel pthread_atfork()
* handlers when shared objects that contain the handlers may
* be dlclose()d. This forces applications that embed perl to
* call PTHREAD_ATFORK() explicitly, but if and only if it hasn't
* been called at least once before in the current process.
* --GSAR 2001-07-20 */
PTHREAD_ATFORK(Perl_atfork_lock,
Perl_atfork_unlock,
Perl_atfork_unlock);
#endif
PERL_SYS_FPU_INIT;
if (!PL_do_undump) {
my_perl = perl_alloc();
if (!my_perl)
exit(1);
perl_construct(my_perl);
PL_perl_destruct_level = 0;
}
PL_exit_flags |= PERL_EXIT_DESTRUCT_END;
exitstatus = perl_parse(my_perl, xs_init, argc, argv, (char **)NULL);
if (!exitstatus)
perl_run(my_perl);
#ifndef PERL_MICRO
/* Unregister our signal handler before destroying my_perl */
for (i = 1; PL_sig_name[i]; i++) {
if (rsignal_state(PL_sig_num[i]) == (Sighandler_t) PL_csighandlerp) {
rsignal(PL_sig_num[i], (Sighandler_t) SIG_DFL);
}
}
#endif
exitstatus = perl_destruct(my_perl);
perl_free(my_perl);
#if defined(USE_ENVIRON_ARRAY) && defined(PERL_TRACK_MEMPOOL) && !defined(NO_ENV_ARRAY_IN_MAIN)
/*
* The old environment may have been freed by perl_free()
* when PERL_TRACK_MEMPOOL is defined, but without having
* been restored by perl_destruct() before (this is only
* done if destruct_level > 0).
*
* It is important to have a valid environment for atexit()
* routines that are eventually called.
*/
environ = env;
#endif
PERL_SYS_TERM();
#ifdef PERL_GLOBAL_STRUCT
# ifdef PERL_GLOBAL_STRUCT_PRIVATE
veto = my_plvarsp->Gveto_cleanup;
# endif
free_global_struct(my_vars);
# ifdef PERL_GLOBAL_STRUCT_PRIVATE
if (!veto)
my_plvarsp = NULL;
/* Remember, functions registered with atexit() can run after this point,
and may access "global" variables, and hence end up calling
Perl_GetVarsPrivate() */
#endif
#endif /* PERL_GLOBAL_STRUCT */
exit(exitstatus);
}
/* Register any extra external extensions */
EOF!HEAD
print $fh xsi_protos(@exts), <<'EOT', xsi_body(@exts), "}\n";
static void
xs_init(pTHX)
{
EOT
if ($real) {
close $fh or die "Can't close '$temp': $!";
rename $temp, $real or die "Can't rename '$temp' to '$real': $!";
}
}
1;
__END__
=head1 NAME
ExtUtils::Miniperl - write the C code for miniperlmain.c and perlmain.c
=head1 SYNOPSIS
use ExtUtils::Miniperl;
writemain(@directories);
# or
writemain($fh, @directories);
# or
writemain(\$filename, @directories);
=head1 DESCRIPTION
C<writemain()> takes an argument list of zero or more directories
containing archive
libraries that relate to perl modules and should be linked into a new
perl binary. It writes a corresponding F<miniperlmain.c> or F<perlmain.c>
file that
is a plain C file containing all the bootstrap code to make the
modules associated with the libraries available from within perl.
If the first argument to C<writemain()> is a reference to a scalar it is
used as the filename to open for output. Any other reference is used as
the filehandle to write to. Otherwise output defaults to C<STDOUT>.
The typical usage is from within perl's own Makefile (to build
F<perlmain.c>) or from F<regen/miniperlmain.pl> (to build miniperlmain.c).
So under normal circumstances you won't have to deal with this module
directly.
=head1 SEE ALSO
L<ExtUtils::MakeMaker>
=cut
# ex: set ts=8 sts=4 sw=4 et: