AlkantarClanX12
Your IP : 3.135.247.17
/* perl.h
*
* Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
* 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 by Larry Wall and others
*
* You may distribute under the terms of either the GNU General Public
* License or the Artistic License, as specified in the README file.
*
*/
#ifndef H_PERL
#define H_PERL 1
#ifdef PERL_FOR_X2P
/*
* This file is being used for x2p stuff.
* Above symbol is defined via -D in 'x2p/Makefile.SH'
* Decouple x2p stuff from some of perls more extreme eccentricities.
*/
#undef MULTIPLICITY
#undef USE_STDIO
#define USE_STDIO
#endif /* PERL_FOR_X2P */
#ifdef PERL_MICRO
# include "uconfig.h"
#else
# include "config.h"
#endif
/* this is used for functions which take a depth trailing
* argument under debugging */
#ifdef DEBUGGING
#define _pDEPTH ,U32 depth
#define _aDEPTH ,depth
#else
#define _pDEPTH
#define _aDEPTH
#endif
/* NOTE 1: that with gcc -std=c89 the __STDC_VERSION__ is *not* defined
* because the __STDC_VERSION__ became a thing only with C90. Therefore,
* with gcc, HAS_C99 will never become true as long as we use -std=c89.
* NOTE 2: headers lie. Do not expect that if HAS_C99 gets to be true,
* all the C99 features are there and are correct. */
#if (defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L) || \
defined(_STDC_C99) || defined(__c99)
# define HAS_C99 1
#endif
/* See L<perlguts/"The Perl API"> for detailed notes on
* PERL_IMPLICIT_CONTEXT and PERL_IMPLICIT_SYS */
/* Note that from here --> to <-- the same logic is
* repeated in makedef.pl, so be certain to update
* both places when editing. */
#ifdef USE_ITHREADS
# if !defined(MULTIPLICITY)
# define MULTIPLICITY
# endif
#endif
#ifdef PERL_GLOBAL_STRUCT_PRIVATE
# ifndef PERL_GLOBAL_STRUCT
# define PERL_GLOBAL_STRUCT
# endif
#endif
#ifdef PERL_GLOBAL_STRUCT
# ifndef MULTIPLICITY
# define MULTIPLICITY
# endif
#endif
#ifdef MULTIPLICITY
# ifndef PERL_IMPLICIT_CONTEXT
# define PERL_IMPLICIT_CONTEXT
# endif
#endif
/* undef WIN32 when building on Cygwin (for libwin32) - gph */
#ifdef __CYGWIN__
# undef WIN32
# undef _WIN32
#endif
#if defined(__SYMBIAN32__) || (defined(__VC32__) && defined(WINS))
# ifndef SYMBIAN
# define SYMBIAN
# endif
#endif
#ifdef __SYMBIAN32__
# include "symbian/symbian_proto.h"
#endif
/* Any stack-challenged places. The limit varies (and often
* is configurable), but using more than a kilobyte of stack
* is usually dubious in these systems. */
#if defined(__SYMBIAN32__)
/* Symbian: need to work around the SDK features. *
* On WINS: MS VC5 generates calls to _chkstk, *
* if a "large" stack frame is allocated. *
* gcc on MARM does not generate calls like these. */
# define USE_HEAP_INSTEAD_OF_STACK
#endif
/* Use the reentrant APIs like localtime_r and getpwent_r */
/* Win32 has naturally threadsafe libraries, no need to use any _r variants. */
#if defined(USE_ITHREADS) && !defined(USE_REENTRANT_API) && !defined(NETWARE) && !defined(WIN32) && !defined(PERL_DARWIN)
# define USE_REENTRANT_API
#endif
/* <--- here ends the logic shared by perl.h and makedef.pl */
/* Microsoft Visual C++ 6.0 needs special treatment in numerous places */
#if defined(WIN32) && defined(_MSC_VER) && _MSC_VER >= 1200 && _MSC_VER < 1300
# define USING_MSVC6
#endif
#undef START_EXTERN_C
#undef END_EXTERN_C
#undef EXTERN_C
#ifdef __cplusplus
# define START_EXTERN_C extern "C" {
# define END_EXTERN_C }
# define EXTERN_C extern "C"
#else
# define START_EXTERN_C
# define END_EXTERN_C
# define EXTERN_C extern
#endif
/* Fallback definitions in case we don't have definitions from config.h.
This should only matter for systems that don't use Configure and
haven't been modified to define PERL_STATIC_INLINE yet.
*/
#if !defined(PERL_STATIC_INLINE)
# ifdef HAS_STATIC_INLINE
# define PERL_STATIC_INLINE static inline
# else
# define PERL_STATIC_INLINE static
# endif
#endif
#ifdef PERL_GLOBAL_STRUCT
# ifndef PERL_GET_VARS
# ifdef PERL_GLOBAL_STRUCT_PRIVATE
EXTERN_C struct perl_vars* Perl_GetVarsPrivate();
# define PERL_GET_VARS() Perl_GetVarsPrivate() /* see miniperlmain.c */
# else
# define PERL_GET_VARS() PL_VarsPtr
# endif
# endif
#endif
/* this used to be off by default, now its on, see perlio.h */
#define PERLIO_FUNCS_CONST
#define pVAR struct perl_vars* my_vars PERL_UNUSED_DECL
#ifdef PERL_GLOBAL_STRUCT
# define dVAR pVAR = (struct perl_vars*)PERL_GET_VARS()
#else
# define dVAR dNOOP
#endif
#ifdef PERL_IMPLICIT_CONTEXT
# ifndef MULTIPLICITY
# define MULTIPLICITY
# endif
# define tTHX PerlInterpreter*
# define pTHX tTHX my_perl PERL_UNUSED_DECL
# define aTHX my_perl
# define aTHXa(a) aTHX = (tTHX)a
# ifdef PERL_GLOBAL_STRUCT
# define dTHXa(a) dVAR; pTHX = (tTHX)a
# else
# define dTHXa(a) pTHX = (tTHX)a
# endif
# ifdef PERL_GLOBAL_STRUCT
# define dTHX dVAR; pTHX = PERL_GET_THX
# else
# define dTHX pTHX = PERL_GET_THX
# endif
# define pTHX_ pTHX,
# define aTHX_ aTHX,
# define pTHX_1 2
# define pTHX_2 3
# define pTHX_3 4
# define pTHX_4 5
# define pTHX_5 6
# define pTHX_6 7
# define pTHX_7 8
# define pTHX_8 9
# define pTHX_9 10
# define pTHX_12 13
# if defined(DEBUGGING) && !defined(PERL_TRACK_MEMPOOL)
# define PERL_TRACK_MEMPOOL
# endif
#else
# undef PERL_TRACK_MEMPOOL
#endif
#define STATIC static
#ifndef PERL_CORE
/* Do not use these macros. They were part of PERL_OBJECT, which was an
* implementation of multiplicity using C++ objects. They have been left
* here solely for the sake of XS code which has incorrectly
* cargo-culted them.
*/
#define CPERLscope(x) x
#define CPERLarg void
#define CPERLarg_
#define _CPERLarg
#define PERL_OBJECT_THIS
#define _PERL_OBJECT_THIS
#define PERL_OBJECT_THIS_
#define CALL_FPTR(fptr) (*fptr)
#define MEMBER_TO_FPTR(name) name
#endif /* !PERL_CORE */
#define CALLRUNOPS PL_runops
#define CALLREGCOMP(sv, flags) Perl_pregcomp(aTHX_ (sv),(flags))
#define CALLREGCOMP_ENG(prog, sv, flags) (prog)->comp(aTHX_ sv, flags)
#define CALLREGEXEC(prog,stringarg,strend,strbeg,minend,sv,data,flags) \
RX_ENGINE(prog)->exec(aTHX_ (prog),(stringarg),(strend), \
(strbeg),(minend),(sv),(data),(flags))
#define CALLREG_INTUIT_START(prog,sv,strbeg,strpos,strend,flags,data) \
RX_ENGINE(prog)->intuit(aTHX_ (prog), (sv), (strbeg), (strpos), \
(strend),(flags),(data))
#define CALLREG_INTUIT_STRING(prog) \
RX_ENGINE(prog)->checkstr(aTHX_ (prog))
#define CALLREGFREE(prog) \
Perl_pregfree(aTHX_ (prog))
#define CALLREGFREE_PVT(prog) \
if(prog) RX_ENGINE(prog)->rxfree(aTHX_ (prog))
#define CALLREG_NUMBUF_FETCH(rx,paren,usesv) \
RX_ENGINE(rx)->numbered_buff_FETCH(aTHX_ (rx),(paren),(usesv))
#define CALLREG_NUMBUF_STORE(rx,paren,value) \
RX_ENGINE(rx)->numbered_buff_STORE(aTHX_ (rx),(paren),(value))
#define CALLREG_NUMBUF_LENGTH(rx,sv,paren) \
RX_ENGINE(rx)->numbered_buff_LENGTH(aTHX_ (rx),(sv),(paren))
#define CALLREG_NAMED_BUFF_FETCH(rx, key, flags) \
RX_ENGINE(rx)->named_buff(aTHX_ (rx), (key), NULL, ((flags) | RXapif_FETCH))
#define CALLREG_NAMED_BUFF_STORE(rx, key, value, flags) \
RX_ENGINE(rx)->named_buff(aTHX_ (rx), (key), (value), ((flags) | RXapif_STORE))
#define CALLREG_NAMED_BUFF_DELETE(rx, key, flags) \
RX_ENGINE(rx)->named_buff(aTHX_ (rx),(key), NULL, ((flags) | RXapif_DELETE))
#define CALLREG_NAMED_BUFF_CLEAR(rx, flags) \
RX_ENGINE(rx)->named_buff(aTHX_ (rx), NULL, NULL, ((flags) | RXapif_CLEAR))
#define CALLREG_NAMED_BUFF_EXISTS(rx, key, flags) \
RX_ENGINE(rx)->named_buff(aTHX_ (rx), (key), NULL, ((flags) | RXapif_EXISTS))
#define CALLREG_NAMED_BUFF_FIRSTKEY(rx, flags) \
RX_ENGINE(rx)->named_buff_iter(aTHX_ (rx), NULL, ((flags) | RXapif_FIRSTKEY))
#define CALLREG_NAMED_BUFF_NEXTKEY(rx, lastkey, flags) \
RX_ENGINE(rx)->named_buff_iter(aTHX_ (rx), (lastkey), ((flags) | RXapif_NEXTKEY))
#define CALLREG_NAMED_BUFF_SCALAR(rx, flags) \
RX_ENGINE(rx)->named_buff(aTHX_ (rx), NULL, NULL, ((flags) | RXapif_SCALAR))
#define CALLREG_NAMED_BUFF_COUNT(rx) \
RX_ENGINE(rx)->named_buff(aTHX_ (rx), NULL, NULL, RXapif_REGNAMES_COUNT)
#define CALLREG_NAMED_BUFF_ALL(rx, flags) \
RX_ENGINE(rx)->named_buff(aTHX_ (rx), NULL, NULL, flags)
#define CALLREG_PACKAGE(rx) \
RX_ENGINE(rx)->qr_package(aTHX_ (rx))
#if defined(USE_ITHREADS)
#define CALLREGDUPE(prog,param) \
Perl_re_dup(aTHX_ (prog),(param))
#define CALLREGDUPE_PVT(prog,param) \
(prog ? RX_ENGINE(prog)->dupe(aTHX_ (prog),(param)) \
: (REGEXP *)NULL)
#endif
/*
* Because of backward compatibility reasons the PERL_UNUSED_DECL
* cannot be changed from postfix to PERL_UNUSED_DECL(x). Sigh.
*
* Note that there are C compilers such as MetroWerks CodeWarrior
* which do not have an "inlined" way (like the gcc __attribute__) of
* marking unused variables (they need e.g. a #pragma) and therefore
* cpp macros like PERL_UNUSED_DECL cannot work for this purpose, even
* if it were PERL_UNUSED_DECL(x), which it cannot be (see above).
*
*/
#if defined(__SYMBIAN32__) && defined(__GNUC__)
# ifdef __cplusplus
# define PERL_UNUSED_DECL
# else
# define PERL_UNUSED_DECL __attribute__((unused))
# endif
#endif
#ifndef PERL_UNUSED_DECL
# if defined(HASATTRIBUTE_UNUSED) && (!defined(__cplusplus) || (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)))
# define PERL_UNUSED_DECL __attribute__unused__
# else
# define PERL_UNUSED_DECL
# endif
#endif
/* gcc -Wall:
* for silencing unused variables that are actually used most of the time,
* but we cannot quite get rid of, such as "ax" in PPCODE+noargs xsubs,
* or variables/arguments that are used only in certain configurations.
*/
#ifndef PERL_UNUSED_ARG
# define PERL_UNUSED_ARG(x) ((void)sizeof(x))
#endif
#ifndef PERL_UNUSED_VAR
# define PERL_UNUSED_VAR(x) ((void)sizeof(x))
#endif
#if defined(USE_ITHREADS) || defined(PERL_GLOBAL_STRUCT)
# define PERL_UNUSED_CONTEXT PERL_UNUSED_ARG(my_perl)
#else
# define PERL_UNUSED_CONTEXT
#endif
/* gcc (-ansi) -pedantic doesn't allow gcc statement expressions,
* g++ allows them but seems to have problems with them
* (insane errors ensue).
* g++ does not give insane errors now (RMB 2008-01-30, gcc 4.2.2).
*/
#if defined(PERL_GCC_PEDANTIC) || \
(defined(__GNUC__) && defined(__cplusplus) && \
((__GNUC__ < 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ < 2))))
# ifndef PERL_GCC_BRACE_GROUPS_FORBIDDEN
# define PERL_GCC_BRACE_GROUPS_FORBIDDEN
# endif
#endif
/* Use PERL_UNUSED_RESULT() to suppress the warnings about unused results
* of function calls, e.g. PERL_UNUSED_RESULT(foo(a, b)).
*
* The main reason for this is that the combination of gcc -Wunused-result
* (part of -Wall) and the __attribute__((warn_unused_result)) cannot
* be silenced with casting to void. This causes trouble when the system
* header files use the attribute.
*
* Use PERL_UNUSED_RESULT sparingly, though, since usually the warning
* is there for a good reason: you might lose success/failure information,
* or leak resources, or changes in resources.
*
* But sometimes you just want to ignore the return value, e.g. on
* codepaths soon ending up in abort, or in "best effort" attempts,
* or in situations where there is no good way to handle failures.
*
* Sometimes PERL_UNUSED_RESULT might not be the most natural way:
* another possibility is that you can capture the return value
* and use PERL_UNUSED_VAR on that.
*
* The __typeof__() is used instead of typeof() since typeof() is not
* available under strict C89, and because of compilers masquerading
* as gcc (clang and icc), we want exactly the gcc extension
* __typeof__ and nothing else.
*/
#ifndef PERL_UNUSED_RESULT
# if defined(__GNUC__) && defined(HASATTRIBUTE_WARN_UNUSED_RESULT)
# define PERL_UNUSED_RESULT(v) STMT_START { __typeof__(v) z = (v); (void)sizeof(z); } STMT_END
# else
# define PERL_UNUSED_RESULT(v) ((void)(v))
# endif
#endif
/* on gcc (and clang), specify that a warning should be temporarily
* ignored; e.g.
*
* GCC_DIAG_IGNORE(-Wmultichar);
* char b = 'ab';
* GCC_DIAG_RESTORE;
*
* based on http://dbp-consulting.com/tutorials/SuppressingGCCWarnings.html
*
* Note that "pragma GCC diagnostic push/pop" was added in GCC 4.6, Mar 2011;
* clang only pretends to be GCC 4.2, but still supports push/pop.
*
* Note on usage: on non-gcc (or lookalike, like clang) compilers
* one cannot use these at file (global) level without warnings
* since they are defined as empty, which leads into the terminating
* semicolon being left alone on a line:
* ;
* which makes compilers mildly cranky. Therefore at file level one
* should use the GCC_DIAG_IGNORE and GCC_DIAG_RESTORE_FILE *without*
* the semicolons.
*
* (A dead-on-arrival solution would be to try to define the macros as
* NOOP or dNOOP, those don't work both inside functions and outside.)
*/
#if defined(__clang__) || defined(__clang) || \
(defined( __GNUC__) && ((__GNUC__ * 100) + __GNUC_MINOR__) >= 406)
# define GCC_DIAG_PRAGMA(x) _Pragma (#x)
/* clang has "clang diagnostic" pragmas, but also understands gcc. */
# define GCC_DIAG_IGNORE(x) _Pragma("GCC diagnostic push") \
GCC_DIAG_PRAGMA(GCC diagnostic ignored #x)
# define GCC_DIAG_RESTORE _Pragma("GCC diagnostic pop")
#else
# define GCC_DIAG_IGNORE(w)
# define GCC_DIAG_RESTORE
#endif
/* for clang specific pragmas */
#if defined(__clang__) || defined(__clang)
# define CLANG_DIAG_PRAGMA(x) _Pragma (#x)
# define CLANG_DIAG_IGNORE(x) _Pragma("clang diagnostic push") \
CLANG_DIAG_PRAGMA(clang diagnostic ignored #x)
# define CLANG_DIAG_RESTORE _Pragma("clang diagnostic pop")
#else
# define CLANG_DIAG_IGNORE(w)
# define CLANG_DIAG_RESTORE
#endif
#define NOOP /*EMPTY*/(void)0
/* cea2e8a9dd23747f accidentally lost the comment originally from the first
check in of thread.h, explaining why we need dNOOP at all: */
/* Rats: if dTHR is just blank then the subsequent ";" throws an error */
/* Declaring a *function*, instead of a variable, ensures that we don't rely
on being able to suppress "unused" warnings. */
#ifdef __cplusplus
#define dNOOP (void)0
#else
#define dNOOP extern int Perl___notused(void)
#endif
#ifndef pTHX
/* Don't bother defining tTHX ; using it outside
* code guarded by PERL_IMPLICIT_CONTEXT is an error.
*/
# define pTHX void
# define pTHX_
# define aTHX
# define aTHX_
# define aTHXa(a) NOOP
# define dTHXa(a) dNOOP
# define dTHX dNOOP
# define pTHX_1 1
# define pTHX_2 2
# define pTHX_3 3
# define pTHX_4 4
# define pTHX_5 5
# define pTHX_6 6
# define pTHX_7 7
# define pTHX_8 8
# define pTHX_9 9
# define pTHX_12 12
#endif
#ifndef dVAR
# define dVAR dNOOP
#endif
/* these are only defined for compatibility; should not be used internally */
#if !defined(pTHXo) && !defined(PERL_CORE)
# define pTHXo pTHX
# define pTHXo_ pTHX_
# define aTHXo aTHX
# define aTHXo_ aTHX_
# define dTHXo dTHX
# define dTHXoa(x) dTHXa(x)
#endif
#ifndef pTHXx
# define pTHXx PerlInterpreter *my_perl
# define pTHXx_ pTHXx,
# define aTHXx my_perl
# define aTHXx_ aTHXx,
# define dTHXx dTHX
#endif
/* Under PERL_IMPLICIT_SYS (used in Windows for fork emulation)
* PerlIO_foo() expands to PL_StdIO->pFOO(PL_StdIO, ...).
* dTHXs is therefore needed for all functions using PerlIO_foo(). */
#ifdef PERL_IMPLICIT_SYS
# ifdef PERL_GLOBAL_STRUCT_PRIVATE
# define dTHXs dVAR; dTHX
# else
# define dTHXs dTHX
# endif
#else
# ifdef PERL_GLOBAL_STRUCT_PRIVATE
# define dTHXs dVAR
# else
# define dTHXs dNOOP
# endif
#endif
#if defined(__GNUC__) && !defined(PERL_GCC_BRACE_GROUPS_FORBIDDEN) && !defined(__cplusplus)
# ifndef PERL_USE_GCC_BRACE_GROUPS
# define PERL_USE_GCC_BRACE_GROUPS
# endif
#endif
/*
* STMT_START { statements; } STMT_END;
* can be used as a single statement, as in
* if (x) STMT_START { ... } STMT_END; else ...
*
* Trying to select a version that gives no warnings...
*/
#if !(defined(STMT_START) && defined(STMT_END))
# ifdef PERL_USE_GCC_BRACE_GROUPS
# define STMT_START (void)( /* gcc supports "({ STATEMENTS; })" */
# define STMT_END )
# else
# define STMT_START do
# define STMT_END while (0)
# endif
#endif
#ifndef BYTEORDER /* Should never happen -- byteorder is in config.h */
# define BYTEORDER 0x1234
#endif
/* Overall memory policy? */
#ifndef CONSERVATIVE
# define LIBERAL 1
#endif
#if 'A' == 65 && 'I' == 73 && 'J' == 74 && 'Z' == 90
#define ASCIIish
#else
#undef ASCIIish
#endif
/*
* The following contortions are brought to you on behalf of all the
* standards, semi-standards, de facto standards, not-so-de-facto standards
* of the world, as well as all the other botches anyone ever thought of.
* The basic theory is that if we work hard enough here, the rest of the
* code can be a lot prettier. Well, so much for theory. Sorry, Henry...
*/
/* define this once if either system, instead of cluttering up the src */
#if defined(MSDOS) || defined(WIN32) || defined(NETWARE)
#define DOSISH 1
#endif
#if defined(__STDC__) || defined(_AIX) || defined(__stdc__) || defined(__cplusplus) || defined(NETWARE) || defined(__SYMBIAN32__)
# define STANDARD_C 1
#endif
#if defined(__cplusplus) || defined(WIN32) || defined(__sgi) || defined(__EMX__) || defined(__QNX__) || defined(NETWARE) || defined(PERL_MICRO)
# define DONT_DECLARE_STD 1
#endif
#if defined(HASVOLATILE) || defined(STANDARD_C)
# define VOL volatile
#else
# define VOL
#endif
/* By compiling a perl with -DNO_TAINT_SUPPORT or -DSILENT_NO_TAINT_SUPPORT,
* you get a perl without taint support, but doubtlessly with a lesser
* degree of support. Do not do so unless you know exactly what it means
* technically, have a good reason to do so, and know exactly how the
* perl will be used. perls with -DSILENT_NO_TAINT_SUPPORT are considered
* a potential security risk due to flat out ignoring the security-relevant
* taint flags. This being said, a perl without taint support compiled in
* has marginal run-time performance benefits.
* SILENT_NO_TAINT_SUPPORT implies NO_TAINT_SUPPORT.
* SILENT_NO_TAINT_SUPPORT is the same as NO_TAINT_SUPPORT except it
* silently ignores -t/-T instead of throwing an exception.
*
* DANGER! Using NO_TAINT_SUPPORT or SILENT_NO_TAINT_SUPPORT
* voids your nonexistent warranty!
*/
#if defined(SILENT_NO_TAINT_SUPPORT) && !defined(NO_TAINT_SUPPORT)
# define NO_TAINT_SUPPORT 1
#endif
/* NO_TAINT_SUPPORT can be set to transform virtually all taint-related
* operations into no-ops for a very modest speed-up. Enable only if you
* know what you're doing: tests and CPAN modules' tests are bound to fail.
*/
#ifdef NO_TAINT_SUPPORT
# define TAINT NOOP
# define TAINT_NOT NOOP
# define TAINT_IF(c) NOOP
# define TAINT_ENV() NOOP
# define TAINT_PROPER(s) NOOP
# define TAINT_set(s) NOOP
# define TAINT_get 0
# define TAINTING_get 0
# define TAINTING_set(s) NOOP
# define TAINT_WARN_get 0
# define TAINT_WARN_set(s) NOOP
#else
# define TAINT (PL_tainted = PL_tainting)
# define TAINT_NOT (PL_tainted = FALSE)
# define TAINT_IF(c) if (UNLIKELY(c)) { PL_tainted = PL_tainting; }
# define TAINT_ENV() if (UNLIKELY(PL_tainting)) { taint_env(); }
# define TAINT_PROPER(s) if (UNLIKELY(PL_tainting)) { taint_proper(NULL, s); }
# define TAINT_set(s) (PL_tainted = (s))
# define TAINT_get (PL_tainted)
# define TAINTING_get (PL_tainting)
# define TAINTING_set(s) (PL_tainting = (s))
# define TAINT_WARN_get (PL_taint_warn)
# define TAINT_WARN_set(s) (PL_taint_warn = (s))
#endif
/* flags used internally only within pp_subst and pp_substcont */
#ifdef PERL_CORE
# define SUBST_TAINT_STR 1 /* string tainted */
# define SUBST_TAINT_PAT 2 /* pattern tainted */
# define SUBST_TAINT_REPL 4 /* replacement tainted */
# define SUBST_TAINT_RETAINT 8 /* use re'taint' in scope */
# define SUBST_TAINT_BOOLRET 16 /* return is boolean (don't taint) */
#endif
/* XXX All process group stuff is handled in pp_sys.c. Should these
defines move there? If so, I could simplify this a lot. --AD 9/96.
*/
/* Process group stuff changed from traditional BSD to POSIX.
perlfunc.pod documents the traditional BSD-style syntax, so we'll
try to preserve that, if possible.
*/
#ifdef HAS_SETPGID
# define BSD_SETPGRP(pid, pgrp) setpgid((pid), (pgrp))
#else
# if defined(HAS_SETPGRP) && defined(USE_BSD_SETPGRP)
# define BSD_SETPGRP(pid, pgrp) setpgrp((pid), (pgrp))
# else
# ifdef HAS_SETPGRP2 /* DG/UX */
# define BSD_SETPGRP(pid, pgrp) setpgrp2((pid), (pgrp))
# endif
# endif
#endif
#if defined(BSD_SETPGRP) && !defined(HAS_SETPGRP)
# define HAS_SETPGRP /* Well, effectively it does . . . */
#endif
/* getpgid isn't POSIX, but at least Solaris and Linux have it, and it makes
our life easier :-) so we'll try it.
*/
#ifdef HAS_GETPGID
# define BSD_GETPGRP(pid) getpgid((pid))
#else
# if defined(HAS_GETPGRP) && defined(USE_BSD_GETPGRP)
# define BSD_GETPGRP(pid) getpgrp((pid))
# else
# ifdef HAS_GETPGRP2 /* DG/UX */
# define BSD_GETPGRP(pid) getpgrp2((pid))
# endif
# endif
#endif
#if defined(BSD_GETPGRP) && !defined(HAS_GETPGRP)
# define HAS_GETPGRP /* Well, effectively it does . . . */
#endif
/* These are not exact synonyms, since setpgrp() and getpgrp() may
have different behaviors, but perl.h used to define USE_BSDPGRP
(prior to 5.003_05) so some extension might depend on it.
*/
#if defined(USE_BSD_SETPGRP) || defined(USE_BSD_GETPGRP)
# ifndef USE_BSDPGRP
# define USE_BSDPGRP
# endif
#endif
/* HP-UX 10.X CMA (Common Multithreaded Architecture) insists that
pthread.h must be included before all other header files.
*/
#if defined(USE_ITHREADS) && defined(PTHREAD_H_FIRST) && defined(I_PTHREAD)
# include <pthread.h>
#endif
#include <sys/types.h>
#ifdef __cplusplus
# ifndef I_STDARG
# define I_STDARG 1
# endif
#endif
/* EVC 4 SDK headers includes a bad definition of MB_CUR_MAX in stdlib.h
which is included from stdarg.h. Bad definition not present in SD 2008
SDK headers. wince.h is not yet included, so we cant fix this from there
since by then MB_CUR_MAX will be defined from stdlib.h.
cewchar.h includes a correct definition of MB_CUR_MAX and it is copied here
since cewchar.h can't be included this early */
#if defined(UNDER_CE) && (_MSC_VER < 1300)
# define MB_CUR_MAX 1
#endif
#ifdef I_STDARG
# include <stdarg.h>
#else
# ifdef I_VARARGS
# include <varargs.h>
# endif
#endif
#ifdef I_STDINT
# include <stdint.h>
#endif
#include <ctype.h>
#ifdef METHOD /* Defined by OSF/1 v3.0 by ctype.h */
#undef METHOD
#endif
#ifdef PERL_MICRO
# define NO_LOCALE
#endif
#ifdef I_LOCALE
# include <locale.h>
#endif
#ifdef I_XLOCALE
# include <xlocale.h>
#endif
#if !defined(NO_LOCALE) && defined(HAS_SETLOCALE)
# define USE_LOCALE
# define HAS_SKIP_LOCALE_INIT /* Solely for XS code to test for this
capability */
# if !defined(NO_LOCALE_COLLATE) && defined(LC_COLLATE) \
&& defined(HAS_STRXFRM)
# define USE_LOCALE_COLLATE
# endif
# if !defined(NO_LOCALE_CTYPE) && defined(LC_CTYPE)
# define USE_LOCALE_CTYPE
# endif
# if !defined(NO_LOCALE_NUMERIC) && defined(LC_NUMERIC)
# define USE_LOCALE_NUMERIC
# endif
# if !defined(NO_LOCALE_MESSAGES) && defined(LC_MESSAGES)
# define USE_LOCALE_MESSAGES
# endif
# if !defined(NO_LOCALE_MONETARY) && defined(LC_MONETARY)
# define USE_LOCALE_MONETARY
# endif
# if !defined(NO_LOCALE_TIME) && defined(LC_TIME)
# define USE_LOCALE_TIME
# endif
# ifndef WIN32 /* No wrapper except on Windows */
# define my_setlocale(a,b) setlocale(a,b)
# endif
#endif /* !NO_LOCALE && HAS_SETLOCALE */
#include <setjmp.h>
#ifdef I_SYS_PARAM
# ifdef PARAM_NEEDS_TYPES
# include <sys/types.h>
# endif
# include <sys/param.h>
#endif
/* On BSD-derived systems, <sys/param.h> defines BSD to a year-month
value something like 199306. This may be useful if no more-specific
feature test is available.
*/
#if defined(BSD)
# ifndef BSDish
# define BSDish
# endif
#endif
/* Use all the "standard" definitions? */
#if defined(STANDARD_C) && defined(I_STDLIB)
# include <stdlib.h>
#endif
/* If this causes problems, set i_unistd=undef in the hint file. */
#ifdef I_UNISTD
# if defined(__amigaos4__)
# ifdef I_NETINET_IN
# include <netinet/in.h>
# endif
# endif
# include <unistd.h>
# if defined(__amigaos4__)
/* Under AmigaOS 4 newlib.library provides an environ. However using
* it doesn't give us enough control over inheritance of variables by
* subshells etc. so replace with custom version based on abc-shell
* code. */
extern char **myenviron;
# undef environ
# define environ myenviron
# endif
#endif
/* for WCOREDUMP */
#ifdef I_SYS_WAIT
# include <sys/wait.h>
#endif
#ifdef __SYMBIAN32__
# undef _SC_ARG_MAX /* Symbian has _SC_ARG_MAX but no sysconf() */
#endif
#if defined(HAS_SYSCALL) && !defined(HAS_SYSCALL_PROTO)
EXTERN_C int syscall(int, ...);
#endif
#if defined(HAS_USLEEP) && !defined(HAS_USLEEP_PROTO)
EXTERN_C int usleep(unsigned int);
#endif
#ifdef PERL_CORE
/* macros for correct constant construction */
# if INTSIZE >= 2
# define U16_CONST(x) ((U16)x##U)
# else
# define U16_CONST(x) ((U16)x##UL)
# endif
# if INTSIZE >= 4
# define U32_CONST(x) ((U32)x##U)
# else
# define U32_CONST(x) ((U32)x##UL)
# endif
# ifdef HAS_QUAD
# if INTSIZE >= 8
# define U64_CONST(x) ((U64)x##U)
# elif LONGSIZE >= 8
# define U64_CONST(x) ((U64)x##UL)
# elif QUADKIND == QUAD_IS_LONG_LONG
# define U64_CONST(x) ((U64)x##ULL)
# elif QUADKIND == QUAD_IS___INT64
# define U64_CONST(x) ((U64)x##UI64)
# else /* best guess we can make */
# define U64_CONST(x) ((U64)x##UL)
# endif
# endif
/* byte-swapping functions for big-/little-endian conversion */
# define _swab_16_(x) ((U16)( \
(((U16)(x) & U16_CONST(0x00ff)) << 8) | \
(((U16)(x) & U16_CONST(0xff00)) >> 8) ))
# define _swab_32_(x) ((U32)( \
(((U32)(x) & U32_CONST(0x000000ff)) << 24) | \
(((U32)(x) & U32_CONST(0x0000ff00)) << 8) | \
(((U32)(x) & U32_CONST(0x00ff0000)) >> 8) | \
(((U32)(x) & U32_CONST(0xff000000)) >> 24) ))
# ifdef HAS_QUAD
# define _swab_64_(x) ((U64)( \
(((U64)(x) & U64_CONST(0x00000000000000ff)) << 56) | \
(((U64)(x) & U64_CONST(0x000000000000ff00)) << 40) | \
(((U64)(x) & U64_CONST(0x0000000000ff0000)) << 24) | \
(((U64)(x) & U64_CONST(0x00000000ff000000)) << 8) | \
(((U64)(x) & U64_CONST(0x000000ff00000000)) >> 8) | \
(((U64)(x) & U64_CONST(0x0000ff0000000000)) >> 24) | \
(((U64)(x) & U64_CONST(0x00ff000000000000)) >> 40) | \
(((U64)(x) & U64_CONST(0xff00000000000000)) >> 56) ))
# endif
/* The old value was hard coded at 1008. (4096-16) seems to be a bit faster,
at least on FreeBSD. YMMV, so experiment. */
#ifndef PERL_ARENA_SIZE
#define PERL_ARENA_SIZE 4080
#endif
/* Maximum level of recursion */
#ifndef PERL_SUB_DEPTH_WARN
#define PERL_SUB_DEPTH_WARN 100
#endif
#endif /* PERL_CORE */
/* We no longer default to creating a new SV for GvSV.
Do this before embed. */
#ifndef PERL_CREATE_GVSV
# ifndef PERL_DONT_CREATE_GVSV
# define PERL_DONT_CREATE_GVSV
# endif
#endif
#if !defined(HAS_WAITPID) && !defined(HAS_WAIT4) || defined(HAS_WAITPID_RUNTIME)
#define PERL_USES_PL_PIDSTATUS
#endif
#if !defined(OS2) && !defined(WIN32) && !defined(DJGPP) && !defined(__SYMBIAN32__)
#define PERL_DEFAULT_DO_EXEC3_IMPLEMENTATION
#endif
#define MEM_SIZE Size_t
/* Round all values passed to malloc up, by default to a multiple of
sizeof(size_t)
*/
#ifndef PERL_STRLEN_ROUNDUP_QUANTUM
#define PERL_STRLEN_ROUNDUP_QUANTUM Size_t_size
#endif
/* sv_grow() will expand strings by at least a certain percentage of
the previously *used* length to avoid excessive calls to realloc().
The default is 25% of the current length.
*/
#ifndef PERL_STRLEN_EXPAND_SHIFT
# define PERL_STRLEN_EXPAND_SHIFT 2
#endif
#if defined(STANDARD_C) && defined(I_STDDEF) && !defined(PERL_GCC_PEDANTIC)
# include <stddef.h>
# define STRUCT_OFFSET(s,m) offsetof(s,m)
#else
# define STRUCT_OFFSET(s,m) (Size_t)(&(((s *)0)->m))
#endif
/* ptrdiff_t is C11, so undef it under pedantic builds */
#ifdef PERL_GCC_PEDANTIC
# undef HAS_PTRDIFF_T
#endif
#ifndef __SYMBIAN32__
# if defined(I_STRING) || defined(__cplusplus)
# include <string.h>
# else
# include <strings.h>
# endif
#endif
/* This comes after <stdlib.h> so we don't try to change the standard
* library prototypes; we'll use our own in proto.h instead. */
#ifdef MYMALLOC
# ifdef PERL_POLLUTE_MALLOC
# ifndef PERL_EXTMALLOC_DEF
# define Perl_malloc malloc
# define Perl_calloc calloc
# define Perl_realloc realloc
# define Perl_mfree free
# endif
# else
# define EMBEDMYMALLOC /* for compatibility */
# endif
# define safemalloc Perl_malloc
# define safecalloc Perl_calloc
# define saferealloc Perl_realloc
# define safefree Perl_mfree
# define CHECK_MALLOC_TOO_LATE_FOR_(code) STMT_START { \
if (!PL_tainting && MallocCfg_ptr[MallocCfg_cfg_env_read]) \
code; \
} STMT_END
# define CHECK_MALLOC_TOO_LATE_FOR(ch) \
CHECK_MALLOC_TOO_LATE_FOR_(MALLOC_TOO_LATE_FOR(ch))
# define panic_write2(s) write(2, s, strlen(s))
# define CHECK_MALLOC_TAINT(newval) \
CHECK_MALLOC_TOO_LATE_FOR_( \
if (newval) { \
PERL_UNUSED_RESULT(panic_write2("panic: tainting with $ENV{PERL_MALLOC_OPT}\n"));\
exit(1); })
# define MALLOC_CHECK_TAINT(argc,argv,env) STMT_START { \
if (doing_taint(argc,argv,env)) { \
MallocCfg_ptr[MallocCfg_skip_cfg_env] = 1; \
}} STMT_END;
#else /* MYMALLOC */
# define safemalloc safesysmalloc
# define safecalloc safesyscalloc
# define saferealloc safesysrealloc
# define safefree safesysfree
# define CHECK_MALLOC_TOO_LATE_FOR(ch) ((void)0)
# define CHECK_MALLOC_TAINT(newval) ((void)0)
# define MALLOC_CHECK_TAINT(argc,argv,env)
#endif /* MYMALLOC */
/* diag_listed_as: "-T" is on the #! line, it must also be used on the command line */
#define TOO_LATE_FOR_(ch,what) Perl_croak(aTHX_ "\"-%c\" is on the #! line, it must also be used on the command line%s", (char)(ch), what)
#define TOO_LATE_FOR(ch) TOO_LATE_FOR_(ch, "")
#define MALLOC_TOO_LATE_FOR(ch) TOO_LATE_FOR_(ch, " with $ENV{PERL_MALLOC_OPT}")
#define MALLOC_CHECK_TAINT2(argc,argv) MALLOC_CHECK_TAINT(argc,argv,NULL)
#if !defined(HAS_STRCHR) && defined(HAS_INDEX) && !defined(strchr)
#define strchr index
#define strrchr rindex
#endif
#ifdef I_MEMORY
# include <memory.h>
#endif
#ifdef HAS_MEMCPY
# if !defined(STANDARD_C) && !defined(I_STRING) && !defined(I_MEMORY)
# ifndef memcpy
extern char * memcpy (char*, char*, int);
# endif
# endif
#else
# ifndef memcpy
# define memcpy(d,s,l) my_bcopy(s,d,l)
# endif
#endif /* HAS_MEMCPY */
#ifdef HAS_MEMSET
# if !defined(STANDARD_C) && !defined(I_STRING) && !defined(I_MEMORY)
# ifndef memset
extern char *memset (char*, int, int);
# endif
# endif
#else
# undef memset
# define memset(d,c,l) my_memset(d,c,l)
#endif /* HAS_MEMSET */
#if !defined(HAS_MEMMOVE) && !defined(memmove)
# if defined(HAS_MEMCPY) && defined(HAS_SAFE_MEMCPY)
# define memmove(d,s,l) memcpy(d,s,l)
# else
# define memmove(d,s,l) my_bcopy(s,d,l)
# endif
#endif
#if defined(mips) && defined(ultrix) && !defined(__STDC__)
# undef HAS_MEMCMP
#endif
#if defined(HAS_MEMCMP) && defined(HAS_SANE_MEMCMP)
# if !defined(STANDARD_C) && !defined(I_STRING) && !defined(I_MEMORY)
# ifndef memcmp
extern int memcmp (char*, char*, int);
# endif
# endif
#else
# undef memcmp
# define memcmp my_memcmp
#endif /* HAS_MEMCMP && HAS_SANE_MEMCMP */
#ifndef memzero
# ifdef HAS_MEMSET
# define memzero(d,l) memset(d,0,l)
# else
# ifdef HAS_BZERO
# define memzero(d,l) bzero(d,l)
# else
# define memzero(d,l) my_bzero(d,l)
# endif
# endif
#endif
#ifndef PERL_MICRO
#ifndef memchr
# ifndef HAS_MEMCHR
# define memchr(s,c,n) ninstr((char*)(s), ((char*)(s)) + n, &(c), &(c) + 1)
# endif
#endif
#endif
#ifndef HAS_BCMP
# ifndef bcmp
# define bcmp(s1,s2,l) memcmp(s1,s2,l)
# endif
#endif /* !HAS_BCMP */
#ifdef I_NETINET_IN
# include <netinet/in.h>
#endif
#ifdef I_ARPA_INET
# include <arpa/inet.h>
#endif
#ifdef I_SYS_STAT
# include <sys/stat.h>
#endif
/* Microsoft VC's sys/stat.h defines all S_Ixxx macros except S_IFIFO.
This definition should ideally go into win32/win32.h, but S_IFIFO is
used later here in perl.h before win32/win32.h is being included. */
#if !defined(S_IFIFO) && defined(_S_IFIFO)
# define S_IFIFO _S_IFIFO
#endif
/* The stat macros for Unisoft System V/88 (and derivatives
like UTekV) are broken, sometimes giving false positives. Undefine
them here and let the code below set them to proper values.
The ghs macro stands for GreenHills Software C-1.8.5 which
is the C compiler for sysV88 and the various derivatives.
This header file bug is corrected in gcc-2.5.8 and later versions.
--Kaveh Ghazi (ghazi@noc.rutgers.edu) 10/3/94. */
#if defined(m88k) && defined(ghs)
# undef S_ISDIR
# undef S_ISCHR
# undef S_ISBLK
# undef S_ISREG
# undef S_ISFIFO
# undef S_ISLNK
#endif
#ifdef I_TIME
# include <time.h>
#endif
#ifdef I_SYS_TIME
# ifdef I_SYS_TIME_KERNEL
# define KERNEL
# endif
# include <sys/time.h>
# ifdef I_SYS_TIME_KERNEL
# undef KERNEL
# endif
#endif
#if defined(HAS_TIMES) && defined(I_SYS_TIMES)
# include <sys/times.h>
#endif
#if defined(HAS_STRERROR) && (!defined(HAS_MKDIR) || !defined(HAS_RMDIR))
# undef HAS_STRERROR
#endif
#include <errno.h>
#if defined(WIN32) && defined(PERL_IMPLICIT_SYS)
# define WIN32SCK_IS_STDSCK /* don't pull in custom wsock layer */
#endif
#if defined(HAS_SOCKET) && !defined(WIN32) /* WIN32 handles sockets via win32.h */
# include <sys/socket.h>
# if defined(USE_SOCKS) && defined(I_SOCKS)
# if !defined(INCLUDE_PROTOTYPES)
# define INCLUDE_PROTOTYPES /* for <socks.h> */
# define PERL_SOCKS_NEED_PROTOTYPES
# endif
# include <socks.h>
# ifdef PERL_SOCKS_NEED_PROTOTYPES /* keep cpp space clean */
# undef INCLUDE_PROTOTYPES
# undef PERL_SOCKS_NEED_PROTOTYPES
# endif
# endif
# ifdef I_NETDB
# ifdef NETWARE
# include<stdio.h>
# endif
# include <netdb.h>
# endif
# ifndef ENOTSOCK
# ifdef I_NET_ERRNO
# include <net/errno.h>
# endif
# endif
#endif
/* sockatmark() is so new (2001) that many places might have it hidden
* behind some -D_BLAH_BLAH_SOURCE guard. The __THROW magic is required
* e.g. in Gentoo, see http://bugs.gentoo.org/show_bug.cgi?id=12605 */
#if defined(HAS_SOCKATMARK) && !defined(HAS_SOCKATMARK_PROTO)
# if defined(__THROW) && defined(__GLIBC__)
int sockatmark(int) __THROW;
# else
int sockatmark(int);
# endif
#endif
#if defined(__osf__) && defined(__cplusplus) && !defined(_XOPEN_SOURCE_EXTENDED) /* Tru64 "cxx" (C++), see hints/dec_osf.sh for why the _XOPEN_SOURCE_EXTENDED cannot be defined. */
EXTERN_C int fchdir(int);
EXTERN_C int flock(int, int);
EXTERN_C int fseeko(FILE *, off_t, int);
EXTERN_C off_t ftello(FILE *);
#endif
#if defined(__SUNPRO_CC) /* SUNWspro CC (C++) */
EXTERN_C char *crypt(const char *, const char *);
EXTERN_C char **environ;
#endif
#if defined(__cplusplus)
# if defined(BSDish)
EXTERN_C char **environ;
# elif defined(__CYGWIN__)
EXTERN_C char *crypt(const char *, const char *);
#endif
#endif
#ifdef SETERRNO
# undef SETERRNO /* SOCKS might have defined this */
#endif
#ifdef VMS
# define SETERRNO(errcode,vmserrcode) \
STMT_START { \
set_errno(errcode); \
set_vaxc_errno(vmserrcode); \
} STMT_END
# define dSAVEDERRNO int saved_errno; unsigned saved_vms_errno
# define dSAVE_ERRNO int saved_errno = errno; unsigned saved_vms_errno = vaxc$errno
# define SAVE_ERRNO ( saved_errno = errno, saved_vms_errno = vaxc$errno )
# define RESTORE_ERRNO SETERRNO(saved_errno, saved_vms_errno)
# define LIB_INVARG LIB$_INVARG
# define RMS_DIR RMS$_DIR
# define RMS_FAC RMS$_FAC
# define RMS_FEX RMS$_FEX
# define RMS_FNF RMS$_FNF
# define RMS_IFI RMS$_IFI
# define RMS_ISI RMS$_ISI
# define RMS_PRV RMS$_PRV
# define SS_ACCVIO SS$_ACCVIO
# define SS_DEVOFFLINE SS$_DEVOFFLINE
# define SS_IVCHAN SS$_IVCHAN
# define SS_NORMAL SS$_NORMAL
# define SS_NOPRIV SS$_NOPRIV
# define SS_BUFFEROVF SS$_BUFFEROVF
#else
# define LIB_INVARG 0
# define RMS_DIR 0
# define RMS_FAC 0
# define RMS_FEX 0
# define RMS_FNF 0
# define RMS_IFI 0
# define RMS_ISI 0
# define RMS_PRV 0
# define SS_ACCVIO 0
# define SS_DEVOFFLINE 0
# define SS_IVCHAN 0
# define SS_NORMAL 0
# define SS_NOPRIV 0
# define SS_BUFFEROVF 0
#endif
#ifdef WIN32
# define dSAVEDERRNO int saved_errno; DWORD saved_win32_errno
# define dSAVE_ERRNO int saved_errno = errno; DWORD saved_win32_errno = GetLastError()
# define SAVE_ERRNO ( saved_errno = errno, saved_win32_errno = GetLastError() )
# define RESTORE_ERRNO ( errno = saved_errno, SetLastError(saved_win32_errno) )
#endif
#ifdef OS2
# define dSAVEDERRNO int saved_errno; unsigned long saved_os2_errno
# define dSAVE_ERRNO int saved_errno = errno; unsigned long saved_os2_errno = Perl_rc
# define SAVE_ERRNO ( saved_errno = errno, saved_os2_errno = Perl_rc )
# define RESTORE_ERRNO ( errno = saved_errno, Perl_rc = saved_os2_errno )
#endif
#ifndef SETERRNO
# define SETERRNO(errcode,vmserrcode) (errno = (errcode))
#endif
#ifndef dSAVEDERRNO
# define dSAVEDERRNO int saved_errno
# define dSAVE_ERRNO int saved_errno = errno
# define SAVE_ERRNO (saved_errno = errno)
# define RESTORE_ERRNO (errno = saved_errno)
#endif
#define ERRSV GvSVn(PL_errgv)
/* contains inlined gv_add_by_type */
#define CLEAR_ERRSV() STMT_START { \
SV ** const svp = &GvSV(PL_errgv); \
if (!*svp) { \
*svp = newSVpvs(""); \
} else if (SvREADONLY(*svp)) { \
SvREFCNT_dec_NN(*svp); \
*svp = newSVpvs(""); \
} else { \
SV *const errsv = *svp; \
SvPVCLEAR(errsv); \
SvPOK_only(errsv); \
if (SvMAGICAL(errsv)) { \
mg_free(errsv); \
} \
} \
} STMT_END
#ifdef PERL_CORE
# define DEFSV (0 + GvSVn(PL_defgv))
# define DEFSV_set(sv) \
(SvREFCNT_dec(GvSV(PL_defgv)), GvSV(PL_defgv) = SvREFCNT_inc(sv))
# define SAVE_DEFSV \
( \
save_gp(PL_defgv, 0), \
GvINTRO_off(PL_defgv), \
SAVEGENERICSV(GvSV(PL_defgv)), \
GvSV(PL_defgv) = NULL \
)
#else
# define DEFSV GvSVn(PL_defgv)
# define DEFSV_set(sv) (GvSV(PL_defgv) = (sv))
# define SAVE_DEFSV SAVESPTR(GvSV(PL_defgv))
#endif
#ifndef errno
extern int errno; /* ANSI allows errno to be an lvalue expr.
* For example in multithreaded environments
* something like this might happen:
* extern int *_errno(void);
* #define errno (*_errno()) */
#endif
#define UNKNOWN_ERRNO_MSG "(unknown)"
#ifdef HAS_STRERROR
# ifndef DONT_DECLARE_STD
# ifdef VMS
char *strerror (int,...);
# else
char *strerror (int);
# endif
# endif
# ifndef Strerror
# define Strerror strerror
# endif
#else
# ifdef HAS_SYS_ERRLIST
extern int sys_nerr;
extern char *sys_errlist[];
# ifndef Strerror
# define Strerror(e) \
((e) < 0 || (e) >= sys_nerr ? UNKNOWN_ERRNO_MSG : sys_errlist[e])
# endif
# endif
#endif
#ifdef I_SYS_IOCTL
# ifndef _IOCTL_
# include <sys/ioctl.h>
# endif
#endif
#if defined(mc300) || defined(mc500) || defined(mc700) || defined(mc6000)
# ifdef HAS_SOCKETPAIR
# undef HAS_SOCKETPAIR
# endif
# ifdef I_NDBM
# undef I_NDBM
# endif
#endif
#ifndef HAS_SOCKETPAIR
# ifdef HAS_SOCKET
# define socketpair Perl_my_socketpair
# endif
#endif
#if INTSIZE == 2
# define htoni htons
# define ntohi ntohs
#else
# define htoni htonl
# define ntohi ntohl
#endif
/* Configure already sets Direntry_t */
#if defined(I_DIRENT)
# include <dirent.h>
#else
# ifdef I_SYS_NDIR
# include <sys/ndir.h>
# else
# ifdef I_SYS_DIR
# ifdef hp9000s500
# include <ndir.h> /* may be wrong in the future */
# else
# include <sys/dir.h>
# endif
# endif
# endif
#endif
/*
* The following gobbledygook brought to you on behalf of __STDC__.
* (I could just use #ifndef __STDC__, but this is more bulletproof
* in the face of half-implementations.)
*/
#if defined(I_SYSMODE)
#include <sys/mode.h>
#endif
#ifndef S_IFMT
# ifdef _S_IFMT
# define S_IFMT _S_IFMT
# else
# define S_IFMT 0170000
# endif
#endif
#ifndef S_ISDIR
# define S_ISDIR(m) ((m & S_IFMT) == S_IFDIR)
#endif
#ifndef S_ISCHR
# define S_ISCHR(m) ((m & S_IFMT) == S_IFCHR)
#endif
#ifndef S_ISBLK
# ifdef S_IFBLK
# define S_ISBLK(m) ((m & S_IFMT) == S_IFBLK)
# else
# define S_ISBLK(m) (0)
# endif
#endif
#ifndef S_ISREG
# define S_ISREG(m) ((m & S_IFMT) == S_IFREG)
#endif
#ifndef S_ISFIFO
# ifdef S_IFIFO
# define S_ISFIFO(m) ((m & S_IFMT) == S_IFIFO)
# else
# define S_ISFIFO(m) (0)
# endif
#endif
#ifndef S_ISLNK
# ifdef _S_ISLNK
# define S_ISLNK(m) _S_ISLNK(m)
# else
# ifdef _S_IFLNK
# define S_ISLNK(m) ((m & S_IFMT) == _S_IFLNK)
# else
# ifdef S_IFLNK
# define S_ISLNK(m) ((m & S_IFMT) == S_IFLNK)
# else
# define S_ISLNK(m) (0)
# endif
# endif
# endif
#endif
#ifndef S_ISSOCK
# ifdef _S_ISSOCK
# define S_ISSOCK(m) _S_ISSOCK(m)
# else
# ifdef _S_IFSOCK
# define S_ISSOCK(m) ((m & S_IFMT) == _S_IFSOCK)
# else
# ifdef S_IFSOCK
# define S_ISSOCK(m) ((m & S_IFMT) == S_IFSOCK)
# else
# define S_ISSOCK(m) (0)
# endif
# endif
# endif
#endif
#ifndef S_IRUSR
# ifdef S_IREAD
# define S_IRUSR S_IREAD
# define S_IWUSR S_IWRITE
# define S_IXUSR S_IEXEC
# else
# define S_IRUSR 0400
# define S_IWUSR 0200
# define S_IXUSR 0100
# endif
#endif
#ifndef S_IRGRP
# ifdef S_IRUSR
# define S_IRGRP (S_IRUSR>>3)
# define S_IWGRP (S_IWUSR>>3)
# define S_IXGRP (S_IXUSR>>3)
# else
# define S_IRGRP 0040
# define S_IWGRP 0020
# define S_IXGRP 0010
# endif
#endif
#ifndef S_IROTH
# ifdef S_IRUSR
# define S_IROTH (S_IRUSR>>6)
# define S_IWOTH (S_IWUSR>>6)
# define S_IXOTH (S_IXUSR>>6)
# else
# define S_IROTH 0040
# define S_IWOTH 0020
# define S_IXOTH 0010
# endif
#endif
#ifndef S_ISUID
# define S_ISUID 04000
#endif
#ifndef S_ISGID
# define S_ISGID 02000
#endif
#ifndef S_IRWXU
# define S_IRWXU (S_IRUSR|S_IWUSR|S_IXUSR)
#endif
#ifndef S_IRWXG
# define S_IRWXG (S_IRGRP|S_IWGRP|S_IXGRP)
#endif
#ifndef S_IRWXO
# define S_IRWXO (S_IROTH|S_IWOTH|S_IXOTH)
#endif
/* Haiku R1 seems to define S_IREAD and S_IWRITE in <posix/fcntl.h>
* which would get included through <sys/file.h >, but that is 3000
* lines in the future. --jhi */
#if !defined(S_IREAD) && !defined(__HAIKU__)
# define S_IREAD S_IRUSR
#endif
#if !defined(S_IWRITE) && !defined(__HAIKU__)
# define S_IWRITE S_IWUSR
#endif
#ifndef S_IEXEC
# define S_IEXEC S_IXUSR
#endif
#if defined(cray) || defined(gould) || defined(i860) || defined(pyr)
# define SLOPPYDIVIDE
#endif
#ifdef UV
#undef UV
#endif
/* For the times when you want the return value of sprintf, and you want it
to be the length. Can't have a thread variable passed in, because C89 has
no varargs macros.
*/
#ifdef SPRINTF_RETURNS_STRLEN
# define my_sprintf sprintf
#else
# define my_sprintf Perl_my_sprintf
#endif
/*
* If we have v?snprintf() and the C99 variadic macros, we can just
* use just the v?snprintf(). It is nice to try to trap the buffer
* overflow, however, so if we are DEBUGGING, and we cannot use the
* gcc statement expressions, then use the function wrappers which try
* to trap the overflow. If we can use the gcc statement expressions,
* we can try that even with the version that uses the C99 variadic
* macros.
*/
/* Note that we do not check against snprintf()/vsnprintf() returning
* negative values because that is non-standard behaviour and we use
* snprintf/vsnprintf only iff HAS_VSNPRINTF has been defined, and
* that should be true only if the snprintf()/vsnprintf() are true
* to the standard. */
#define PERL_SNPRINTF_CHECK(len, max, api) STMT_START { if ((max) > 0 && (Size_t)len >= (max)) Perl_croak_nocontext("panic: %s buffer overflow", STRINGIFY(api)); } STMT_END
#ifdef USE_QUADMATH
# define my_snprintf Perl_my_snprintf
# define PERL_MY_SNPRINTF_GUARDED
#else
#if defined(HAS_SNPRINTF) && defined(HAS_C99_VARIADIC_MACROS) && !(defined(DEBUGGING) && !defined(PERL_USE_GCC_BRACE_GROUPS)) && !defined(PERL_GCC_PEDANTIC)
# ifdef PERL_USE_GCC_BRACE_GROUPS
# define my_snprintf(buffer, max, ...) ({ int len = snprintf(buffer, max, __VA_ARGS__); PERL_SNPRINTF_CHECK(len, max, snprintf); len; })
# define PERL_MY_SNPRINTF_GUARDED
# else
# define my_snprintf(buffer, max, ...) snprintf(buffer, max, __VA_ARGS__)
# endif
#else
# define my_snprintf Perl_my_snprintf
# define PERL_MY_SNPRINTF_GUARDED
#endif
#endif
/* There is no quadmath_vsnprintf, and therefore my_vsnprintf()
* dies if called under USE_QUADMATH. */
#if defined(HAS_VSNPRINTF) && defined(HAS_C99_VARIADIC_MACROS) && !(defined(DEBUGGING) && !defined(PERL_USE_GCC_BRACE_GROUPS)) && !defined(PERL_GCC_PEDANTIC)
# ifdef PERL_USE_GCC_BRACE_GROUPS
# define my_vsnprintf(buffer, max, ...) ({ int len = vsnprintf(buffer, max, __VA_ARGS__); PERL_SNPRINTF_CHECK(len, max, vsnprintf); len; })
# define PERL_MY_VSNPRINTF_GUARDED
# else
# define my_vsnprintf(buffer, max, ...) vsnprintf(buffer, max, __VA_ARGS__)
# endif
#else
# define my_vsnprintf Perl_my_vsnprintf
# define PERL_MY_VSNPRINTF_GUARDED
#endif
/* You will definitely need to use the PERL_MY_SNPRINTF_POST_GUARD()
* or PERL_MY_VSNPRINTF_POST_GUARD() if you otherwise decide to ignore
* the result of my_snprintf() or my_vsnprintf(). (No, you should not
* completely ignore it: otherwise you cannot know whether your output
* was too long.)
*
* int len = my_sprintf(buf, max, ...);
* PERL_MY_SNPRINTF_POST_GUARD(len, max);
*
* The trick is that in certain platforms [a] the my_sprintf() already
* contains the sanity check, while in certain platforms [b] it needs
* to be done as a separate step. The POST_GUARD is that step-- in [a]
* platforms the POST_GUARD actually does nothing since the check has
* already been done. Watch out for the max being the same in both calls.
*
* If you actually use the snprintf/vsnprintf return value already,
* you assumedly are checking its validity somehow. But you can
* insert the POST_GUARD() also in that case. */
#ifndef PERL_MY_SNPRINTF_GUARDED
# define PERL_MY_SNPRINTF_POST_GUARD(len, max) PERL_SNPRINTF_CHECK(len, max, snprintf)
#else
# define PERL_MY_SNPRINTF_POST_GUARD(len, max) PERL_UNUSED_VAR(len)
#endif
#ifndef PERL_MY_VSNPRINTF_GUARDED
# define PERL_MY_VSNPRINTF_POST_GUARD(len, max) PERL_SNPRINTF_CHECK(len, max, vsnprintf)
#else
# define PERL_MY_VSNPRINTF_POST_GUARD(len, max) PERL_UNUSED_VAR(len)
#endif
#ifdef HAS_STRLCAT
# define my_strlcat strlcat
#else
# define my_strlcat Perl_my_strlcat
#endif
#ifdef HAS_STRLCPY
# define my_strlcpy strlcpy
#else
# define my_strlcpy Perl_my_strlcpy
#endif
/*
The IV type is supposed to be long enough to hold any integral
value or a pointer.
--Andy Dougherty August 1996
*/
typedef IVTYPE IV;
typedef UVTYPE UV;
#if defined(USE_64_BIT_INT) && defined(HAS_QUAD)
# if QUADKIND == QUAD_IS_INT64_T && defined(INT64_MAX)
# define IV_MAX INT64_MAX
# define IV_MIN INT64_MIN
# define UV_MAX UINT64_MAX
# ifndef UINT64_MIN
# define UINT64_MIN 0
# endif
# define UV_MIN UINT64_MIN
# else
# define IV_MAX PERL_QUAD_MAX
# define IV_MIN PERL_QUAD_MIN
# define UV_MAX PERL_UQUAD_MAX
# define UV_MIN PERL_UQUAD_MIN
# endif
# define IV_IS_QUAD
# define UV_IS_QUAD
#else
# if defined(INT32_MAX) && IVSIZE == 4
# define IV_MAX INT32_MAX
# define IV_MIN INT32_MIN
# ifndef UINT32_MAX_BROKEN /* e.g. HP-UX with gcc messes this up */
# define UV_MAX UINT32_MAX
# else
# define UV_MAX 4294967295U
# endif
# ifndef UINT32_MIN
# define UINT32_MIN 0
# endif
# define UV_MIN UINT32_MIN
# else
# define IV_MAX PERL_LONG_MAX
# define IV_MIN PERL_LONG_MIN
# define UV_MAX PERL_ULONG_MAX
# define UV_MIN PERL_ULONG_MIN
# endif
# if IVSIZE == 8
# define IV_IS_QUAD
# define UV_IS_QUAD
# ifndef HAS_QUAD
# define HAS_QUAD
# endif
# else
# undef IV_IS_QUAD
# undef UV_IS_QUAD
#if !defined(PERL_CORE) || defined(USING_MSVC6)
/* We think that removing this decade-old undef this will cause too much
breakage on CPAN for too little gain. (See RT #119753)
However, we do need HAS_QUAD in the core for use by the drand48 code,
but not for Win32 VC6 because it has poor __int64 support. */
# undef HAS_QUAD
#endif
# endif
#endif
#define Size_t_MAX (~(Size_t)0)
#define SSize_t_MAX (SSize_t)(~(Size_t)0 >> 1)
#define IV_DIG (BIT_DIGITS(IVSIZE * 8))
#define UV_DIG (BIT_DIGITS(UVSIZE * 8))
#ifndef NO_PERL_PRESERVE_IVUV
#define PERL_PRESERVE_IVUV /* We like our integers to stay integers. */
#endif
/*
* The macros INT2PTR and NUM2PTR are (despite their names)
* bi-directional: they will convert int/float to or from pointers.
* However the conversion to int/float are named explicitly:
* PTR2IV, PTR2UV, PTR2NV.
*
* For int conversions we do not need two casts if pointers are
* the same size as IV and UV. Otherwise we need an explicit
* cast (PTRV) to avoid compiler warnings.
*/
#if (IVSIZE == PTRSIZE) && (UVSIZE == PTRSIZE)
# define PTRV UV
# define INT2PTR(any,d) (any)(d)
#else
# if PTRSIZE == LONGSIZE
# define PTRV unsigned long
# define PTR2ul(p) (unsigned long)(p)
# else
# define PTRV unsigned
# endif
#endif
#ifndef INT2PTR
# define INT2PTR(any,d) (any)(PTRV)(d)
#endif
#ifndef PTR2ul
# define PTR2ul(p) INT2PTR(unsigned long,p)
#endif
#define NUM2PTR(any,d) (any)(PTRV)(d)
#define PTR2IV(p) INT2PTR(IV,p)
#define PTR2UV(p) INT2PTR(UV,p)
#define PTR2NV(p) NUM2PTR(NV,p)
#define PTR2nat(p) (PTRV)(p) /* pointer to integer of PTRSIZE */
/* According to strict ANSI C89 one cannot freely cast between
* data pointers and function (code) pointers. There are at least
* two ways around this. One (used below) is to do two casts,
* first the other pointer to an (unsigned) integer, and then
* the integer to the other pointer. The other way would be
* to use unions to "overlay" the pointers. For an example of
* the latter technique, see union dirpu in struct xpvio in sv.h.
* The only feasible use is probably temporarily storing
* function pointers in a data pointer (such as a void pointer). */
#define DPTR2FPTR(t,p) ((t)PTR2nat(p)) /* data pointer to function pointer */
#define FPTR2DPTR(t,p) ((t)PTR2nat(p)) /* function pointer to data pointer */
#ifdef USE_LONG_DOUBLE
# if LONG_DOUBLESIZE == DOUBLESIZE
# define LONG_DOUBLE_EQUALS_DOUBLE
# undef USE_LONG_DOUBLE /* Ouch! */
# endif
#endif
#ifdef OVR_DBL_DIG
/* Use an overridden DBL_DIG */
# ifdef DBL_DIG
# undef DBL_DIG
# endif
# define DBL_DIG OVR_DBL_DIG
#else
/* The following is all to get DBL_DIG, in order to pick a nice
default value for printing floating point numbers in Gconvert
(see config.h). (It also has other uses, such as figuring out if
a given precision of printing can be done with a double instead of
a long double - Allen).
*/
#ifdef I_LIMITS
#include <limits.h>
#endif
#ifdef I_FLOAT
#include <float.h>
#endif
#ifndef HAS_DBL_DIG
#define DBL_DIG 15 /* A guess that works lots of places */
#endif
#endif
#ifdef OVR_LDBL_DIG
/* Use an overridden LDBL_DIG */
# ifdef LDBL_DIG
# undef LDBL_DIG
# endif
# define LDBL_DIG OVR_LDBL_DIG
#else
/* The following is all to get LDBL_DIG, in order to pick a nice
default value for printing floating point numbers in Gconvert.
(see config.h)
*/
# ifdef I_LIMITS
# include <limits.h>
# endif
# ifdef I_FLOAT
# include <float.h>
# endif
# ifndef HAS_LDBL_DIG
# if LONG_DOUBLESIZE == 10
# define LDBL_DIG 18 /* assume IEEE */
# else
# if LONG_DOUBLESIZE == 12
# define LDBL_DIG 18 /* gcc? */
# else
# if LONG_DOUBLESIZE == 16
# define LDBL_DIG 33 /* assume IEEE */
# else
# if LONG_DOUBLESIZE == DOUBLESIZE
# define LDBL_DIG DBL_DIG /* bummer */
# endif
# endif
# endif
# endif
# endif
#endif
/*
* This is for making sure we have a good DBL_MAX value, if possible,
* either for usage as NV_MAX or for usage in figuring out if we can
* fit a given long double into a double, if bug-fixing makes it
* necessary to do so. - Allen <allens@cpan.org>
*/
#ifdef I_LIMITS
# include <limits.h>
#endif
#ifdef I_VALUES
# if !(defined(DBL_MIN) && defined(DBL_MAX) && defined(I_LIMITS))
# include <values.h>
# if defined(MAXDOUBLE) && !defined(DBL_MAX)
# define DBL_MAX MAXDOUBLE
# endif
# if defined(MINDOUBLE) && !defined(DBL_MIN)
# define DBL_MIN MINDOUBLE
# endif
# endif
#endif /* defined(I_VALUES) */
typedef NVTYPE NV;
#ifdef I_IEEEFP
# include <ieeefp.h>
#endif
#ifdef USING_MSVC6
/* VC6 has broken NaN semantics: NaN == NaN returns true instead of false,
* and for example NaN < IV_MIN. */
# define NAN_COMPARE_BROKEN
#endif
#if defined(__DECC) && defined(__osf__)
/* Also Tru64 cc has broken NaN comparisons. */
# define NAN_COMPARE_BROKEN
#endif
#if defined(__sgi)
# define NAN_COMPARE_BROKEN
#endif
#ifdef USE_LONG_DOUBLE
# ifdef I_SUNMATH
# include <sunmath.h>
# endif
# if defined(LDBL_DIG)
# define NV_DIG LDBL_DIG
# ifdef LDBL_MANT_DIG
# define NV_MANT_DIG LDBL_MANT_DIG
# endif
# ifdef LDBL_MIN
# define NV_MIN LDBL_MIN
# endif
# ifdef LDBL_MAX
# define NV_MAX LDBL_MAX
# endif
# ifdef LDBL_MIN_EXP
# define NV_MIN_EXP LDBL_MIN_EXP
# endif
# ifdef LDBL_MAX_EXP
# define NV_MAX_EXP LDBL_MAX_EXP
# endif
# ifdef LDBL_MIN_10_EXP
# define NV_MIN_10_EXP LDBL_MIN_10_EXP
# endif
# ifdef LDBL_MAX_10_EXP
# define NV_MAX_10_EXP LDBL_MAX_10_EXP
# endif
# ifdef LDBL_EPSILON
# define NV_EPSILON LDBL_EPSILON
# endif
# ifdef LDBL_MAX
# define NV_MAX LDBL_MAX
/* Having LDBL_MAX doesn't necessarily mean that we have LDBL_MIN... -Allen */
# else
# ifdef HUGE_VALL
# define NV_MAX HUGE_VALL
# endif
# endif
# endif
# if defined(HAS_SQRTL)
# define Perl_acos acosl
# define Perl_asin asinl
# define Perl_atan atanl
# define Perl_atan2 atan2l
# define Perl_ceil ceill
# define Perl_cos cosl
# define Perl_cosh coshl
# define Perl_exp expl
/* no Perl_fabs, but there's PERL_ABS */
# define Perl_floor floorl
# define Perl_fmod fmodl
# define Perl_log logl
# define Perl_log10 log10l
# define Perl_pow powl
# define Perl_sin sinl
# define Perl_sinh sinhl
# define Perl_sqrt sqrtl
# define Perl_tan tanl
# define Perl_tanh tanhl
# endif
/* e.g. libsunmath doesn't have modfl and frexpl as of mid-March 2000 */
# ifndef Perl_modf
# ifdef HAS_MODFL
# define Perl_modf(x,y) modfl(x,y)
/* eg glibc 2.2 series seems to provide modfl on ppc and arm, but has no
prototype in <math.h> */
# ifndef HAS_MODFL_PROTO
EXTERN_C long double modfl(long double, long double *);
# endif
# elif (defined(HAS_TRUNCL) || defined(HAS_AINTL)) && defined(HAS_COPYSIGNL)
extern long double Perl_my_modfl(long double x, long double *ip);
# define Perl_modf(x,y) Perl_my_modfl(x,y)
# endif
# endif
# ifndef Perl_frexp
# ifdef HAS_FREXPL
# define Perl_frexp(x,y) frexpl(x,y)
# else
# if defined(HAS_ILOGBL) && defined(HAS_SCALBNL)
extern long double Perl_my_frexpl(long double x, int *e);
# define Perl_frexp(x,y) Perl_my_frexpl(x,y)
# endif
# endif
# endif
# ifndef Perl_ldexp
# ifdef HAS_LDEXPL
# define Perl_ldexp(x, y) ldexpl(x,y)
# else
# if defined(HAS_SCALBNL) && FLT_RADIX == 2
# define Perl_ldexp(x,y) scalbnl(x,y)
# endif
# endif
# endif
# ifndef Perl_isnan
# if defined(HAS_ISNANL) && !(defined(isnan) && defined(HAS_C99))
# define Perl_isnan(x) isnanl(x)
# elif defined(__sgi) && defined(__c99) /* XXX Configure test needed */
# define Perl_isnan(x) isnan(x)
# endif
# endif
# ifndef Perl_isinf
# if defined(HAS_ISINFL) && !(defined(isinf) && defined(HAS_C99))
# define Perl_isinf(x) isinfl(x)
# elif defined(__sgi) && defined(__c99) /* XXX Configure test needed */
# define Perl_isinf(x) isinf(x)
# elif defined(LDBL_MAX) && !defined(NAN_COMPARE_BROKEN)
# define Perl_isinf(x) ((x) > LDBL_MAX || (x) < -LDBL_MAX)
# endif
# endif
# ifndef Perl_isfinite
# define Perl_isfinite(x) Perl_isfinitel(x)
# endif
#elif defined(USE_QUADMATH) && defined(I_QUADMATH)
# include <quadmath.h>
# define NV_DIG FLT128_DIG
# define NV_MANT_DIG FLT128_MANT_DIG
# define NV_MIN FLT128_MIN
# define NV_MAX FLT128_MAX
# define NV_MIN_EXP FLT128_MIN_EXP
# define NV_MAX_EXP FLT128_MAX_EXP
# define NV_EPSILON FLT128_EPSILON
# define NV_MIN_10_EXP FLT128_MIN_10_EXP
# define NV_MAX_10_EXP FLT128_MAX_10_EXP
# define Perl_acos acosq
# define Perl_asin asinq
# define Perl_atan atanq
# define Perl_atan2 atan2q
# define Perl_ceil ceilq
# define Perl_cos cosq
# define Perl_cosh coshq
# define Perl_exp expq
/* no Perl_fabs, but there's PERL_ABS */
# define Perl_floor floorq
# define Perl_fmod fmodq
# define Perl_log logq
# define Perl_log10 log10q
# define Perl_pow powq
# define Perl_sin sinq
# define Perl_sinh sinhq
# define Perl_sqrt sqrtq
# define Perl_tan tanq
# define Perl_tanh tanhq
# define Perl_modf(x,y) modfq(x,y)
# define Perl_frexp(x,y) frexpq(x,y)
# define Perl_ldexp(x, y) ldexpq(x,y)
# define Perl_isinf(x) isinfq(x)
# define Perl_isnan(x) isnanq(x)
# define Perl_isfinite(x) !(isnanq(x) || isinfq(x))
# define Perl_fp_class(x) ((x) == 0.0Q ? 0 : isinfq(x) ? 3 : isnanq(x) ? 4 : PERL_ABS(x) < FLT128_MIN ? 2 : 1)
# define Perl_fp_class_inf(x) (Perl_fp_class(x) == 3)
# define Perl_fp_class_nan(x) (Perl_fp_class(x) == 4)
# define Perl_fp_class_norm(x) (Perl_fp_class(x) == 1)
# define Perl_fp_class_denorm(x) (Perl_fp_class(x) == 2)
# define Perl_fp_class_zero(x) (Perl_fp_class(x) == 0)
#else
# define NV_DIG DBL_DIG
# ifdef DBL_MANT_DIG
# define NV_MANT_DIG DBL_MANT_DIG
# endif
# ifdef DBL_MIN
# define NV_MIN DBL_MIN
# endif
# ifdef DBL_MAX
# define NV_MAX DBL_MAX
# endif
# ifdef DBL_MIN_EXP
# define NV_MIN_EXP DBL_MIN_EXP
# endif
# ifdef DBL_MAX_EXP
# define NV_MAX_EXP DBL_MAX_EXP
# endif
# ifdef DBL_MIN_10_EXP
# define NV_MIN_10_EXP DBL_MIN_10_EXP
# endif
# ifdef DBL_MAX_10_EXP
# define NV_MAX_10_EXP DBL_MAX_10_EXP
# endif
# ifdef DBL_EPSILON
# define NV_EPSILON DBL_EPSILON
# endif
# ifdef DBL_MAX /* XXX Does DBL_MAX imply having DBL_MIN? */
# define NV_MAX DBL_MAX
# define NV_MIN DBL_MIN
# else
# ifdef HUGE_VAL
# define NV_MAX HUGE_VAL
# endif
# endif
/* These math interfaces are C89. */
# define Perl_acos acos
# define Perl_asin asin
# define Perl_atan atan
# define Perl_atan2 atan2
# define Perl_ceil ceil
# define Perl_cos cos
# define Perl_cosh cosh
# define Perl_exp exp
/* no Perl_fabs, but there's PERL_ABS */
# define Perl_floor floor
# define Perl_fmod fmod
# define Perl_log log
# define Perl_log10 log10
# define Perl_pow pow
# define Perl_sin sin
# define Perl_sinh sinh
# define Perl_sqrt sqrt
# define Perl_tan tan
# define Perl_tanh tanh
# define Perl_modf(x,y) modf(x,y)
# define Perl_frexp(x,y) frexp(x,y)
# define Perl_ldexp(x,y) ldexp(x,y)
# ifndef Perl_isnan
# ifdef HAS_ISNAN
# define Perl_isnan(x) isnan(x)
# endif
# endif
# ifndef Perl_isinf
# if defined(HAS_ISINF)
# define Perl_isinf(x) isinf(x)
# elif defined(DBL_MAX) && !defined(NAN_COMPARE_BROKEN)
# define Perl_isinf(x) ((x) > DBL_MAX || (x) < -DBL_MAX)
# endif
# endif
# ifndef Perl_isfinite
# ifdef HAS_ISFINITE
# define Perl_isfinite(x) isfinite(x)
# elif defined(HAS_FINITE)
# define Perl_isfinite(x) finite(x)
# endif
# endif
#endif
/* fpclassify(): C99. It is supposed to be a macro that switches on
* the sizeof() of its argument, so there's no need for e.g. fpclassifyl().*/
#if !defined(Perl_fp_class) && defined(HAS_FPCLASSIFY)
# include <math.h>
# if defined(FP_INFINITE) && defined(FP_NAN)
# define Perl_fp_class(x) fpclassify(x)
# define Perl_fp_class_inf(x) (Perl_fp_class(x)==FP_INFINITE)
# define Perl_fp_class_nan(x) (Perl_fp_class(x)==FP_NAN)
# define Perl_fp_class_norm(x) (Perl_fp_class(x)==FP_NORMAL)
# define Perl_fp_class_denorm(x) (Perl_fp_class(x)==FP_SUBNORMAL)
# define Perl_fp_class_zero(x) (Perl_fp_class(x)==FP_ZERO)
# elif defined(FP_PLUS_INF) && defined(FP_QNAN)
/* Some versions of HP-UX (10.20) have (only) fpclassify() but which is
* actually not the C99 fpclassify, with its own set of return defines. */
# define Perl_fp_class(x) fpclassify(x)
# define Perl_fp_class_pinf(x) (Perl_fp_class(x)==FP_PLUS_INF)
# define Perl_fp_class_ninf(x) (Perl_fp_class(x)==FP_MINUS_INF)
# define Perl_fp_class_snan(x) (Perl_fp_class(x)==FP_SNAN)
# define Perl_fp_class_qnan(x) (Perl_fp_class(x)==FP_QNAN)
# define Perl_fp_class_pnorm(x) (Perl_fp_class(x)==FP_PLUS_NORM)
# define Perl_fp_class_nnorm(x) (Perl_fp_class(x)==FP_MINUS_NORM)
# define Perl_fp_class_pdenorm(x) (Perl_fp_class(x)==FP_PLUS_DENORM)
# define Perl_fp_class_ndenorm(x) (Perl_fp_class(x)==FP_MINUS_DENORM)
# define Perl_fp_class_pzero(x) (Perl_fp_class(x)==FP_PLUS_ZERO)
# define Perl_fp_class_nzero(x) (Perl_fp_class(x)==FP_MINUS_ZERO)
# else
# undef Perl_fp_class /* Unknown set of defines */
# endif
#endif
/* fp_classify(): Legacy: VMS, maybe Unicos? The values, however,
* are identical to the C99 fpclassify(). */
#if !defined(Perl_fp_class) && defined(HAS_FP_CLASSIFY)
# include <math.h>
# ifdef __VMS
/* FP_INFINITE and others are here rather than in math.h as C99 stipulates */
# include <fp.h>
/* oh, and the isnormal macro has a typo in it! */
# undef isnormal
# define isnormal(x) Perl_fp_class_norm(x)
# endif
# if defined(FP_INFINITE) && defined(FP_NAN)
# define Perl_fp_class(x) fp_classify(x)
# define Perl_fp_class_inf(x) (Perl_fp_class(x)==FP_INFINITE)
# define Perl_fp_class_nan(x) (Perl_fp_class(x)==FP_NAN)
# define Perl_fp_class_norm(x) (Perl_fp_class(x)==FP_NORMAL)
# define Perl_fp_class_denorm(x) (Perl_fp_class(x)==FP_SUBNORMAL)
# define Perl_fp_class_zero(x) (Perl_fp_class(x)==FP_ZERO)
# else
# undef Perl_fp_class /* Unknown set of defines */
# endif
#endif
/* Feel free to check with me for the SGI manpages, SGI testing,
* etcetera, if you want to try getting this to work with IRIX.
*
* - Allen <allens@cpan.org> */
/* fpclass(): SysV, at least Solaris and some versions of IRIX. */
#if !defined(Perl_fp_class) && (defined(HAS_FPCLASS)||defined(HAS_FPCLASSL))
/* Solaris and IRIX have fpclass/fpclassl, but they are using
* an enum typedef, not cpp symbols, and Configure doesn't detect that.
* Define some symbols also as cpp symbols so we can detect them. */
# if defined(__sun) || defined(__sgi) /* XXX Configure test instead */
# define FP_PINF FP_PINF
# define FP_QNAN FP_QNAN
# endif
# include <math.h>
# ifdef I_IEEFP
# include <ieeefp.h>
# endif
# ifdef I_FP
# include <fp.h>
# endif
# if defined(USE_LONG_DOUBLE) && defined(HAS_FPCLASSL)
# define Perl_fp_class(x) fpclassl(x)
# else
# define Perl_fp_class(x) fpclass(x)
# endif
# if defined(FP_CLASS_PINF) && defined(FP_CLASS_SNAN)
# define Perl_fp_class_snan(x) (Perl_fp_class(x)==FP_CLASS_SNAN)
# define Perl_fp_class_qnan(x) (Perl_fp_class(x)==FP_CLASS_QNAN)
# define Perl_fp_class_ninf(x) (Perl_fp_class(x)==FP_CLASS_NINF)
# define Perl_fp_class_pinf(x) (Perl_fp_class(x)==FP_CLASS_PINF)
# define Perl_fp_class_nnorm(x) (Perl_fp_class(x)==FP_CLASS_NNORM)
# define Perl_fp_class_pnorm(x) (Perl_fp_class(x)==FP_CLASS_PNORM)
# define Perl_fp_class_ndenorm(x) (Perl_fp_class(x)==FP_CLASS_NDENORM)
# define Perl_fp_class_pdenorm(x) (Perl_fp_class(x)==FP_CLASS_PDENORM)
# define Perl_fp_class_nzero(x) (Perl_fp_class(x)==FP_CLASS_NZERO)
# define Perl_fp_class_pzero(x) (Perl_fp_class(x)==FP_CLASS_PZERO)
# elif defined(FP_PINF) && defined(FP_QNAN)
# define Perl_fp_class_snan(x) (Perl_fp_class(x)==FP_SNAN)
# define Perl_fp_class_qnan(x) (Perl_fp_class(x)==FP_QNAN)
# define Perl_fp_class_ninf(x) (Perl_fp_class(x)==FP_NINF)
# define Perl_fp_class_pinf(x) (Perl_fp_class(x)==FP_PINF)
# define Perl_fp_class_nnorm(x) (Perl_fp_class(x)==FP_NNORM)
# define Perl_fp_class_pnorm(x) (Perl_fp_class(x)==FP_PNORM)
# define Perl_fp_class_ndenorm(x) (Perl_fp_class(x)==FP_NDENORM)
# define Perl_fp_class_pdenorm(x) (Perl_fp_class(x)==FP_PDENORM)
# define Perl_fp_class_nzero(x) (Perl_fp_class(x)==FP_NZERO)
# define Perl_fp_class_pzero(x) (Perl_fp_class(x)==FP_PZERO)
# else
# undef Perl_fp_class /* Unknown set of defines */
# endif
#endif
/* fp_class(): Legacy: at least Tru64, some versions of IRIX. */
#if !defined(Perl_fp_class) && (defined(HAS_FP_CLASS)||defined(HAS_FP_CLASSL))
# include <math.h>
# if !defined(FP_SNAN) && defined(I_FP_CLASS)
# include <fp_class.h>
# endif
# if defined(FP_POS_INF) && defined(FP_QNAN)
# ifdef __sgi /* XXX Configure test instead */
# ifdef USE_LONG_DOUBLE
# define Perl_fp_class(x) fp_class_l(x)
# else
# define Perl_fp_class(x) fp_class_d(x)
# endif
# else
# if defined(USE_LONG_DOUBLE) && defined(HAS_FP_CLASSL)
# define Perl_fp_class(x) fp_classl(x)
# else
# define Perl_fp_class(x) fp_class(x)
# endif
# endif
# if defined(FP_POS_INF) && defined(FP_QNAN)
# define Perl_fp_class_snan(x) (Perl_fp_class(x)==FP_SNAN)
# define Perl_fp_class_qnan(x) (Perl_fp_class(x)==FP_QNAN)
# define Perl_fp_class_ninf(x) (Perl_fp_class(x)==FP_NEG_INF)
# define Perl_fp_class_pinf(x) (Perl_fp_class(x)==FP_POS_INF)
# define Perl_fp_class_nnorm(x) (Perl_fp_class(x)==FP_NEG_NORM)
# define Perl_fp_class_pnorm(x) (Perl_fp_class(x)==FP_POS_NORM)
# define Perl_fp_class_ndenorm(x) (Perl_fp_class(x)==FP_NEG_DENORM)
# define Perl_fp_class_pdenorm(x) (Perl_fp_class(x)==FP_POS_DENORM)
# define Perl_fp_class_nzero(x) (Perl_fp_class(x)==FP_NEG_ZERO)
# define Perl_fp_class_pzero(x) (Perl_fp_class(x)==FP_POS_ZERO)
# else
# undef Perl_fp_class /* Unknown set of defines */
# endif
# endif
#endif
/* class(), _class(): Legacy: AIX. */
#if !defined(Perl_fp_class) && defined(HAS_CLASS)
# include <math.h>
# if defined(FP_PLUS_NORM) && defined(FP_PLUS_INF)
# ifndef _cplusplus
# define Perl_fp_class(x) class(x)
# else
# define Perl_fp_class(x) _class(x)
# endif
# if defined(FP_PLUS_INF) && defined(FP_NANQ)
# define Perl_fp_class_snan(x) (Perl_fp_class(x)==FP_NANS)
# define Perl_fp_class_qnan(x) (Perl_fp_class(x)==FP_NANQ)
# define Perl_fp_class_ninf(x) (Perl_fp_class(x)==FP_MINUS_INF)
# define Perl_fp_class_pinf(x) (Perl_fp_class(x)==FP_PLUS_INF)
# define Perl_fp_class_nnorm(x) (Perl_fp_class(x)==FP_MINUS_NORM)
# define Perl_fp_class_pnorm(x) (Perl_fp_class(x)==FP_PLUS_NORM)
# define Perl_fp_class_ndenorm(x) (Perl_fp_class(x)==FP_MINUS_DENORM)
# define Perl_fp_class_pdenorm(x) (Perl_fp_class(x)==FP_PLUS_DENORM)
# define Perl_fp_class_nzero(x) (Perl_fp_class(x)==FP_MINUS_ZERO)
# define Perl_fp_class_pzero(x) (Perl_fp_class(x)==FP_PLUS_ZERO)
# else
# undef Perl_fp_class /* Unknown set of defines */
# endif
# endif
#endif
/* Win32: _fpclass(), _isnan(), _finite(). */
#ifdef WIN32
# ifndef Perl_isnan
# define Perl_isnan(x) _isnan(x)
# endif
# ifndef Perl_isfinite
# define Perl_isfinite(x) _finite(x)
# endif
# ifndef Perl_fp_class_snan
/* No simple way to #define Perl_fp_class because _fpclass()
* returns a set of bits. */
# define Perl_fp_class_snan(x) (_fpclass(x) & _FPCLASS_SNAN)
# define Perl_fp_class_qnan(x) (_fpclass(x) & _FPCLASS_QNAN)
# define Perl_fp_class_nan(x) (_fpclass(x) & (_FPCLASS_SNAN|_FPCLASS_QNAN))
# define Perl_fp_class_ninf(x) (_fpclass(x) & _FPCLASS_NINF))
# define Perl_fp_class_pinf(x) (_fpclass(x) & _FPCLASS_PINF))
# define Perl_fp_class_inf(x) (_fpclass(x) & (_FPCLASS_NINF|_FPCLASS_PINF))
# define Perl_fp_class_nnorm(x) (_fpclass(x) & _FPCLASS_NN)
# define Perl_fp_class_pnorm(x) (_fpclass(x) & _FPCLASS_PN)
# define Perl_fp_class_norm(x) (_fpclass(x) & (_FPCLASS_NN|_FPCLASS_PN))
# define Perl_fp_class_ndenorm(x) (_fpclass(x) & _FPCLASS_ND)
# define Perl_fp_class_pdenorm(x) (_fpclass(x) & _FPCLASS_PD)
# define Perl_fp_class_denorm(x) (_fpclass(x) & (_FPCLASS_ND|_FPCLASS_PD))
# define Perl_fp_class_nzero(x) (_fpclass(x) & _FPCLASS_NZ)
# define Perl_fp_class_pzero(x) (_fpclass(x) & _FPCLASS_PZ)
# define Perl_fp_class_zero(x) (_fpclass(x) & (_FPCLASS_NZ|_FPCLASS_PZ))
# endif
#endif
#if !defined(Perl_fp_class_inf) && \
defined(Perl_fp_class_pinf) && defined(Perl_fp_class_ninf)
# define Perl_fp_class_inf(x) \
(Perl_fp_class_pinf(x) || Perl_fp_class_ninf(x))
#endif
#if !defined(Perl_fp_class_nan) && \
defined(Perl_fp_class_snan) && defined(Perl_fp_class_qnan)
# define Perl_fp_class_nan(x) \
(Perl_fp_class_snan(x) || Perl_fp_class_qnan(x))
#endif
#if !defined(Perl_fp_class_zero) && \
defined(Perl_fp_class_pzero) && defined(Perl_fp_class_nzero)
# define Perl_fp_class_zero(x) \
(Perl_fp_class_pzero(x) || Perl_fp_class_nzero(x))
#endif
#if !defined(Perl_fp_class_norm) && \
defined(Perl_fp_class_pnorm) && defined(Perl_fp_class_nnorm)
# define Perl_fp_class_norm(x) \
(Perl_fp_class_pnorm(x) || Perl_fp_class_nnorm(x))
#endif
#if !defined(Perl_fp_class_denorm) && \
defined(Perl_fp_class_pdenorm) && defined(Perl_fp_class_ndenorm)
# define Perl_fp_class_denorm(x) \
(Perl_fp_class_pdenorm(x) || Perl_fp_class_ndenorm(x))
#endif
#ifdef UNDER_CE
int isnan(double d);
#endif
#ifndef Perl_isnan
# ifdef Perl_fp_class_nan
# define Perl_isnan(x) Perl_fp_class_nan(x)
# else
# ifdef HAS_UNORDERED
# define Perl_isnan(x) unordered((x), 0.0)
# else
# define Perl_isnan(x) ((x)!=(x))
# endif
# endif
#endif
#ifndef Perl_isinf
# ifdef Perl_fp_class_inf
# define Perl_isinf(x) Perl_fp_class_inf(x)
# endif
#endif
#ifndef Perl_isfinite
# if defined(HAS_ISFINITE) && !defined(isfinite)
# define Perl_isfinite(x) isfinite((double)(x))
# elif defined(HAS_FINITE)
# define Perl_isfinite(x) finite((double)(x))
# elif defined(Perl_fp_class_finite)
# define Perl_isfinite(x) Perl_fp_class_finite(x)
# else
/* For the infinities the multiplication returns nan,
* for the nan the multiplication also returns nan,
* for everything else (that is, finite) zero should be returned. */
# define Perl_isfinite(x) (((x) * 0) == 0)
# endif
#endif
#ifndef Perl_isinf
# if defined(Perl_isfinite) && defined(Perl_isnan)
# define Perl_isinf(x) !(Perl_isfinite(x)||Perl_isnan(x))
# endif
#endif
/* We need Perl_isfinitel (ends with ell) (if available) even when
* not USE_LONG_DOUBLE because the printf code (sv_catpvfn_flags)
* needs that. */
#if defined(HAS_LONG_DOUBLE) && !defined(Perl_isfinitel)
/* If isfinite() is a macro and looks like we have C99,
* we assume it's the type-aware C99 isfinite(). */
# if defined(HAS_ISFINITE) && defined(isfinite) && defined(HAS_C99)
# define Perl_isfinitel(x) isfinite(x)
# elif defined(HAS_ISFINITEL)
# define Perl_isfinitel(x) isfinitel(x)
# elif defined(HAS_FINITEL)
# define Perl_isfinitel(x) finitel(x)
# elif defined(HAS_INFL) && defined(HAS_NANL)
# define Perl_isfinitel(x) !(isinfl(x)||isnanl(x))
# else
# define Perl_isfinitel(x) ((x) * 0 == 0) /* See Perl_isfinite. */
# endif
#endif
/* The default is to use Perl's own atof() implementation (in numeric.c).
* Usually that is the one to use but for some platforms (e.g. UNICOS)
* it is however best to use the native implementation of atof.
* You can experiment with using your native one by -DUSE_PERL_ATOF=0.
* Some good tests to try out with either setting are t/base/num.t,
* t/op/numconvert.t, and t/op/pack.t. Note that if using long doubles
* you may need to be using a different function than atof! */
#ifndef USE_PERL_ATOF
# ifndef _UNICOS
# define USE_PERL_ATOF
# endif
#else
# if USE_PERL_ATOF == 0
# undef USE_PERL_ATOF
# endif
#endif
#ifdef USE_PERL_ATOF
# define Perl_atof(s) Perl_my_atof(s)
# define Perl_atof2(s, n) Perl_my_atof2(aTHX_ (s), &(n))
#else
# define Perl_atof(s) (NV)atof(s)
# define Perl_atof2(s, n) ((n) = atof(s))
#endif
/* Previously these definitions used hardcoded figures.
* It is hoped these formula are more portable, although
* no data one way or another is presently known to me.
* The "PERL_" names are used because these calculated constants
* do not meet the ANSI requirements for LONG_MAX, etc., which
* need to be constants acceptable to #if - kja
* define PERL_LONG_MAX 2147483647L
* define PERL_LONG_MIN (-LONG_MAX - 1)
* define PERL ULONG_MAX 4294967295L
*/
#ifdef I_LIMITS /* Needed for cast_xxx() functions below. */
# include <limits.h>
#endif
/* Included values.h above if necessary; still including limits.h down here,
* despite doing above, because math.h might have overridden... XXX - Allen */
/*
* Try to figure out max and min values for the integral types. THE CORRECT
* SOLUTION TO THIS MESS: ADAPT enquire.c FROM GCC INTO CONFIGURE. The
* following hacks are used if neither limits.h or values.h provide them:
* U<TYPE>_MAX: for types >= int: ~(unsigned TYPE)0
* for types < int: (unsigned TYPE)~(unsigned)0
* The argument to ~ must be unsigned so that later signed->unsigned
* conversion can't modify the value's bit pattern (e.g. -0 -> +0),
* and it must not be smaller than int because ~ does integral promotion.
* <type>_MAX: (<type>) (U<type>_MAX >> 1)
* <type>_MIN: -<type>_MAX - <is_twos_complement_architecture: (3 & -1) == 3>.
* The latter is a hack which happens to work on some machines but
* does *not* catch any random system, or things like integer types
* with NaN if that is possible.
*
* All of the types are explicitly cast to prevent accidental loss of
* numeric range, and in the hope that they will be less likely to confuse
* over-eager optimizers.
*
*/
#define PERL_UCHAR_MIN ((unsigned char)0)
#ifdef UCHAR_MAX
# define PERL_UCHAR_MAX ((unsigned char)UCHAR_MAX)
#else
# ifdef MAXUCHAR
# define PERL_UCHAR_MAX ((unsigned char)MAXUCHAR)
# else
# define PERL_UCHAR_MAX ((unsigned char)~(unsigned)0)
# endif
#endif
/*
* CHAR_MIN and CHAR_MAX are not included here, as the (char) type may be
* ambiguous. It may be equivalent to (signed char) or (unsigned char)
* depending on local options. Until Configure detects this (or at least
* detects whether the "signed" keyword is available) the CHAR ranges
* will not be included. UCHAR functions normally.
* - kja
*/
#define PERL_USHORT_MIN ((unsigned short)0)
#ifdef USHORT_MAX
# define PERL_USHORT_MAX ((unsigned short)USHORT_MAX)
#else
# ifdef MAXUSHORT
# define PERL_USHORT_MAX ((unsigned short)MAXUSHORT)
# else
# ifdef USHRT_MAX
# define PERL_USHORT_MAX ((unsigned short)USHRT_MAX)
# else
# define PERL_USHORT_MAX ((unsigned short)~(unsigned)0)
# endif
# endif
#endif
#ifdef SHORT_MAX
# define PERL_SHORT_MAX ((short)SHORT_MAX)
#else
# ifdef MAXSHORT /* Often used in <values.h> */
# define PERL_SHORT_MAX ((short)MAXSHORT)
# else
# ifdef SHRT_MAX
# define PERL_SHORT_MAX ((short)SHRT_MAX)
# else
# define PERL_SHORT_MAX ((short) (PERL_USHORT_MAX >> 1))
# endif
# endif
#endif
#ifdef SHORT_MIN
# define PERL_SHORT_MIN ((short)SHORT_MIN)
#else
# ifdef MINSHORT
# define PERL_SHORT_MIN ((short)MINSHORT)
# else
# ifdef SHRT_MIN
# define PERL_SHORT_MIN ((short)SHRT_MIN)
# else
# define PERL_SHORT_MIN (-PERL_SHORT_MAX - ((3 & -1) == 3))
# endif
# endif
#endif
#ifdef UINT_MAX
# define PERL_UINT_MAX ((unsigned int)UINT_MAX)
#else
# ifdef MAXUINT
# define PERL_UINT_MAX ((unsigned int)MAXUINT)
# else
# define PERL_UINT_MAX (~(unsigned int)0)
# endif
#endif
#define PERL_UINT_MIN ((unsigned int)0)
#ifdef INT_MAX
# define PERL_INT_MAX ((int)INT_MAX)
#else
# ifdef MAXINT /* Often used in <values.h> */
# define PERL_INT_MAX ((int)MAXINT)
# else
# define PERL_INT_MAX ((int)(PERL_UINT_MAX >> 1))
# endif
#endif
#ifdef INT_MIN
# define PERL_INT_MIN ((int)INT_MIN)
#else
# ifdef MININT
# define PERL_INT_MIN ((int)MININT)
# else
# define PERL_INT_MIN (-PERL_INT_MAX - ((3 & -1) == 3))
# endif
#endif
#ifdef ULONG_MAX
# define PERL_ULONG_MAX ((unsigned long)ULONG_MAX)
#else
# ifdef MAXULONG
# define PERL_ULONG_MAX ((unsigned long)MAXULONG)
# else
# define PERL_ULONG_MAX (~(unsigned long)0)
# endif
#endif
#define PERL_ULONG_MIN ((unsigned long)0L)
#ifdef LONG_MAX
# define PERL_LONG_MAX ((long)LONG_MAX)
#else
# ifdef MAXLONG /* Often used in <values.h> */
# define PERL_LONG_MAX ((long)MAXLONG)
# else
# define PERL_LONG_MAX ((long) (PERL_ULONG_MAX >> 1))
# endif
#endif
#ifdef LONG_MIN
# define PERL_LONG_MIN ((long)LONG_MIN)
#else
# ifdef MINLONG
# define PERL_LONG_MIN ((long)MINLONG)
# else
# define PERL_LONG_MIN (-PERL_LONG_MAX - ((3 & -1) == 3))
# endif
#endif
#ifdef UV_IS_QUAD
# define PERL_UQUAD_MAX (~(UV)0)
# define PERL_UQUAD_MIN ((UV)0)
# define PERL_QUAD_MAX ((IV) (PERL_UQUAD_MAX >> 1))
# define PERL_QUAD_MIN (-PERL_QUAD_MAX - ((3 & -1) == 3))
#endif
typedef MEM_SIZE STRLEN;
typedef struct op OP;
typedef struct cop COP;
typedef struct unop UNOP;
typedef struct unop_aux UNOP_AUX;
typedef struct binop BINOP;
typedef struct listop LISTOP;
typedef struct logop LOGOP;
typedef struct pmop PMOP;
typedef struct svop SVOP;
typedef struct padop PADOP;
typedef struct pvop PVOP;
typedef struct loop LOOP;
typedef struct methop METHOP;
#ifdef PERL_CORE
typedef struct opslab OPSLAB;
typedef struct opslot OPSLOT;
#endif
typedef struct block_hooks BHK;
typedef struct custom_op XOP;
typedef struct interpreter PerlInterpreter;
/* SGI's <sys/sema.h> has struct sv */
#if defined(__sgi)
# define STRUCT_SV perl_sv
#else
# define STRUCT_SV sv
#endif
typedef struct STRUCT_SV SV;
typedef struct av AV;
typedef struct hv HV;
typedef struct cv CV;
typedef struct p5rx REGEXP;
typedef struct gp GP;
typedef struct gv GV;
typedef struct io IO;
typedef struct context PERL_CONTEXT;
typedef struct block BLOCK;
typedef struct magic MAGIC;
typedef struct xpv XPV;
typedef struct xpviv XPVIV;
typedef struct xpvuv XPVUV;
typedef struct xpvnv XPVNV;
typedef struct xpvmg XPVMG;
typedef struct xpvlv XPVLV;
typedef struct xpvinvlist XINVLIST;
typedef struct xpvav XPVAV;
typedef struct xpvhv XPVHV;
typedef struct xpvgv XPVGV;
typedef struct xpvcv XPVCV;
typedef struct xpvbm XPVBM;
typedef struct xpvfm XPVFM;
typedef struct xpvio XPVIO;
typedef struct mgvtbl MGVTBL;
typedef union any ANY;
typedef struct ptr_tbl_ent PTR_TBL_ENT_t;
typedef struct ptr_tbl PTR_TBL_t;
typedef struct clone_params CLONE_PARAMS;
/* a pad is currently just an AV; but that might change,
* so hide the type. */
typedef struct padlist PADLIST;
typedef AV PAD;
typedef struct padnamelist PADNAMELIST;
typedef struct padname PADNAME;
/* enable PERL_OP_PARENT by default */
#if !defined(PERL_OP_PARENT) && !defined(PERL_NO_OP_PARENT)
# define PERL_OP_PARENT
#endif
/* enable PERL_COPY_ON_WRITE by default */
#if !defined(PERL_COPY_ON_WRITE) && !defined(PERL_NO_COW)
# define PERL_COPY_ON_WRITE
#endif
#ifdef PERL_COPY_ON_WRITE
# define PERL_ANY_COW
#else
# define PERL_SAWAMPERSAND
#endif
#if defined(PERL_DEBUG_READONLY_OPS) && !defined(USE_ITHREADS)
# error PERL_DEBUG_READONLY_OPS only works with ithreads
#endif
#include "handy.h"
#include "charclass_invlists.h"
#if defined(USE_LARGE_FILES) && !defined(NO_64_BIT_RAWIO)
# if LSEEKSIZE == 8 && !defined(USE_64_BIT_RAWIO)
# define USE_64_BIT_RAWIO /* implicit */
# endif
#endif
/* Notice the use of HAS_FSEEKO: now we are obligated to always use
* fseeko/ftello if possible. Don't go #defining ftell to ftello yourself,
* however, because operating systems like to do that themself. */
#ifndef FSEEKSIZE
# ifdef HAS_FSEEKO
# define FSEEKSIZE LSEEKSIZE
# else
# define FSEEKSIZE LONGSIZE
# endif
#endif
#if defined(USE_LARGE_FILES) && !defined(NO_64_BIT_STDIO)
# if FSEEKSIZE == 8 && !defined(USE_64_BIT_STDIO)
# define USE_64_BIT_STDIO /* implicit */
# endif
#endif
#ifdef USE_64_BIT_RAWIO
# ifdef HAS_OFF64_T
# undef Off_t
# define Off_t off64_t
# undef LSEEKSIZE
# define LSEEKSIZE 8
# endif
/* Most 64-bit environments have defines like _LARGEFILE_SOURCE that
* will trigger defines like the ones below. Some 64-bit environments,
* however, do not. Therefore we have to explicitly mix and match. */
# if defined(USE_OPEN64)
# define open open64
# endif
# if defined(USE_LSEEK64)
# define lseek lseek64
# else
# if defined(USE_LLSEEK)
# define lseek llseek
# endif
# endif
# if defined(USE_STAT64)
# define stat stat64
# endif
# if defined(USE_FSTAT64)
# define fstat fstat64
# endif
# if defined(USE_LSTAT64)
# define lstat lstat64
# endif
# if defined(USE_FLOCK64)
# define flock flock64
# endif
# if defined(USE_LOCKF64)
# define lockf lockf64
# endif
# if defined(USE_FCNTL64)
# define fcntl fcntl64
# endif
# if defined(USE_TRUNCATE64)
# define truncate truncate64
# endif
# if defined(USE_FTRUNCATE64)
# define ftruncate ftruncate64
# endif
#endif
#ifdef USE_64_BIT_STDIO
# ifdef HAS_FPOS64_T
# undef Fpos_t
# define Fpos_t fpos64_t
# endif
/* Most 64-bit environments have defines like _LARGEFILE_SOURCE that
* will trigger defines like the ones below. Some 64-bit environments,
* however, do not. */
# if defined(USE_FOPEN64)
# define fopen fopen64
# endif
# if defined(USE_FSEEK64)
# define fseek fseek64 /* don't do fseeko here, see perlio.c */
# endif
# if defined(USE_FTELL64)
# define ftell ftell64 /* don't do ftello here, see perlio.c */
# endif
# if defined(USE_FSETPOS64)
# define fsetpos fsetpos64
# endif
# if defined(USE_FGETPOS64)
# define fgetpos fgetpos64
# endif
# if defined(USE_TMPFILE64)
# define tmpfile tmpfile64
# endif
# if defined(USE_FREOPEN64)
# define freopen freopen64
# endif
#endif
#if defined(OS2)
# include "iperlsys.h"
#endif
#ifdef DOSISH
# if defined(OS2)
# include "os2ish.h"
# else
# include "dosish.h"
# endif
#elif defined(VMS)
# include "vmsish.h"
#elif defined(PLAN9)
# include "./plan9/plan9ish.h"
#elif defined(__VOS__)
# ifdef __GNUC__
# include "./vos/vosish.h"
# else
# include "vos/vosish.h"
# endif
#elif defined(__SYMBIAN32__)
# include "symbian/symbianish.h"
#elif defined(__HAIKU__)
# include "haiku/haikuish.h"
#else
# include "unixish.h"
#endif
#ifdef __amigaos4__
# include "amigaos.h"
# undef FD_CLOEXEC /* a lie in AmigaOS */
#endif
/* NSIG logic from Configure --> */
/* Strange style to avoid deeply-nested #if/#else/#endif */
#ifndef NSIG
# ifdef _NSIG
# define NSIG (_NSIG)
# endif
#endif
#ifndef NSIG
# ifdef SIGMAX
# define NSIG (SIGMAX+1)
# endif
#endif
#ifndef NSIG
# ifdef SIG_MAX
# define NSIG (SIG_MAX+1)
# endif
#endif
#ifndef NSIG
# ifdef _SIG_MAX
# define NSIG (_SIG_MAX+1)
# endif
#endif
#ifndef NSIG
# ifdef MAXSIG
# define NSIG (MAXSIG+1)
# endif
#endif
#ifndef NSIG
# ifdef MAX_SIG
# define NSIG (MAX_SIG+1)
# endif
#endif
#ifndef NSIG
# ifdef SIGARRAYSIZE
# define NSIG SIGARRAYSIZE /* Assume ary[SIGARRAYSIZE] */
# endif
#endif
#ifndef NSIG
# ifdef _sys_nsig
# define NSIG (_sys_nsig) /* Solaris 2.5 */
# endif
#endif
/* Default to some arbitrary number that's big enough to get most
of the common signals.
*/
#ifndef NSIG
# define NSIG 50
#endif
/* <-- NSIG logic from Configure */
#ifndef NO_ENVIRON_ARRAY
# define USE_ENVIRON_ARRAY
#endif
/*
* initialise to avoid floating-point exceptions from overflow, etc
*/
#ifndef PERL_FPU_INIT
# ifdef HAS_FPSETMASK
# if HAS_FLOATINGPOINT_H
# include <floatingpoint.h>
# endif
/* Some operating systems have this as a macro, which in turn expands to a comma
expression, and the last sub-expression is something that gets calculated,
and then they have the gall to warn that a value computed is not used. Hence
cast to void. */
# define PERL_FPU_INIT (void)fpsetmask(0)
# else
# if defined(SIGFPE) && defined(SIG_IGN) && !defined(PERL_MICRO)
# define PERL_FPU_INIT PL_sigfpe_saved = (Sighandler_t) signal(SIGFPE, SIG_IGN)
# define PERL_FPU_PRE_EXEC { Sigsave_t xfpe; rsignal_save(SIGFPE, PL_sigfpe_saved, &xfpe);
# define PERL_FPU_POST_EXEC rsignal_restore(SIGFPE, &xfpe); }
# else
# define PERL_FPU_INIT
# endif
# endif
#endif
#ifndef PERL_FPU_PRE_EXEC
# define PERL_FPU_PRE_EXEC {
# define PERL_FPU_POST_EXEC }
#endif
/* In Tru64 the cc -ieee enables the IEEE math but disables traps.
* We need to reenable the "invalid" trap because otherwise generation
* of NaN values leaves the IEEE fp flags in bad state, leaving any further
* fp ops behaving strangely (Inf + 1 resulting in zero, for example). */
#ifdef __osf__
# include <machine/fpu.h>
# define PERL_SYS_FPU_INIT \
STMT_START { \
ieee_set_fp_control(IEEE_TRAP_ENABLE_INV); \
signal(SIGFPE, SIG_IGN); \
} STMT_END
#endif
/* In IRIX the default for Flush to Zero bit is true,
* which means that results going below the minimum of normal
* floating points go to zero, instead of going denormal/subnormal.
* This is unlike almost any other system running Perl, so let's clear it.
* [perl #123767] IRIX64 blead (ddce084a) opbasic/arith.t failure, originally
* [perl #120426] small numbers shouldn't round to zero if they have extra floating digits
*
* XXX The flush-to-zero behaviour should be a Configure scan.
* To change the behaviour usually requires some system-specific
* incantation, though, like the below. */
#ifdef __sgi
# include <sys/fpu.h>
# define PERL_SYS_FPU_INIT \
STMT_START { \
union fpc_csr csr; \
csr.fc_word = get_fpc_csr(); \
csr.fc_struct.flush = 0; \
set_fpc_csr(csr.fc_word); \
} STMT_END
#endif
#ifndef PERL_SYS_FPU_INIT
# define PERL_SYS_FPU_INIT NOOP
#endif
#ifndef PERL_SYS_INIT3_BODY
# define PERL_SYS_INIT3_BODY(argvp,argcp,envp) PERL_SYS_INIT_BODY(argvp,argcp)
#endif
/*
=head1 Miscellaneous Functions
=for apidoc Am|void|PERL_SYS_INIT|int *argc|char*** argv
Provides system-specific tune up of the C runtime environment necessary to
run Perl interpreters. This should be called only once, before creating
any Perl interpreters.
=for apidoc Am|void|PERL_SYS_INIT3|int *argc|char*** argv|char*** env
Provides system-specific tune up of the C runtime environment necessary to
run Perl interpreters. This should be called only once, before creating
any Perl interpreters.
=for apidoc Am|void|PERL_SYS_TERM|
Provides system-specific clean up of the C runtime environment after
running Perl interpreters. This should be called only once, after
freeing any remaining Perl interpreters.
=cut
*/
#define PERL_SYS_INIT(argc, argv) Perl_sys_init(argc, argv)
#define PERL_SYS_INIT3(argc, argv, env) Perl_sys_init3(argc, argv, env)
#define PERL_SYS_TERM() Perl_sys_term()
#ifndef PERL_WRITE_MSG_TO_CONSOLE
# define PERL_WRITE_MSG_TO_CONSOLE(io, msg, len) PerlIO_write(io, msg, len)
#endif
#ifndef MAXPATHLEN
# ifdef PATH_MAX
# ifdef _POSIX_PATH_MAX
# if PATH_MAX > _POSIX_PATH_MAX
/* POSIX 1990 (and pre) was ambiguous about whether PATH_MAX
* included the null byte or not. Later amendments of POSIX,
* XPG4, the Austin Group, and the Single UNIX Specification
* all explicitly include the null byte in the PATH_MAX.
* Ditto for _POSIX_PATH_MAX. */
# define MAXPATHLEN PATH_MAX
# else
# define MAXPATHLEN _POSIX_PATH_MAX
# endif
# else
# define MAXPATHLEN (PATH_MAX+1)
# endif
# else
# define MAXPATHLEN 1024 /* Err on the large side. */
# endif
#endif
/* In case Configure was not used (we are using a "canned config"
* such as Win32, or a cross-compilation setup, for example) try going
* by the gcc major and minor versions. One useful URL is
* http://www.ohse.de/uwe/articles/gcc-attributes.html,
* but contrary to this information warn_unused_result seems
* not to be in gcc 3.3.5, at least. --jhi
* Also, when building extensions with an installed perl, this allows
* the user to upgrade gcc and get the right attributes, rather than
* relying on the list generated at Configure time. --AD
* Set these up now otherwise we get confused when some of the <*thread.h>
* includes below indirectly pull in <perlio.h> (which needs to know if we
* have HASATTRIBUTE_FORMAT).
*/
#ifndef PERL_MICRO
#if defined __GNUC__ && !defined(__INTEL_COMPILER)
# if __GNUC__ == 3 && __GNUC_MINOR__ >= 1 || __GNUC__ > 3 /* 3.1 -> */
# define HASATTRIBUTE_DEPRECATED
# endif
# if __GNUC__ >= 3 /* 3.0 -> */ /* XXX Verify this version */
# define HASATTRIBUTE_FORMAT
# if defined __MINGW32__
# define PRINTF_FORMAT_NULL_OK
# endif
# endif
# if __GNUC__ >= 3 /* 3.0 -> */
# define HASATTRIBUTE_MALLOC
# endif
# if __GNUC__ == 3 && __GNUC_MINOR__ >= 3 || __GNUC__ > 3 /* 3.3 -> */
# define HASATTRIBUTE_NONNULL
# endif
# if __GNUC__ == 2 && __GNUC_MINOR__ >= 5 || __GNUC__ > 2 /* 2.5 -> */
# define HASATTRIBUTE_NORETURN
# endif
# if __GNUC__ >= 3 /* gcc 3.0 -> */
# define HASATTRIBUTE_PURE
# endif
# if __GNUC__ == 3 && __GNUC_MINOR__ >= 4 || __GNUC__ > 3 /* 3.4 -> */
# define HASATTRIBUTE_UNUSED
# endif
# if __GNUC__ == 3 && __GNUC_MINOR__ == 3 && !defined(__cplusplus)
# define HASATTRIBUTE_UNUSED /* gcc-3.3, but not g++-3.3. */
# endif
# if __GNUC__ == 3 && __GNUC_MINOR__ >= 4 || __GNUC__ > 3 /* 3.4 -> */
# define HASATTRIBUTE_WARN_UNUSED_RESULT
# endif
#endif
#endif /* #ifndef PERL_MICRO */
/* USE_5005THREADS needs to be after unixish.h as <pthread.h> includes
* <sys/signal.h> which defines NSIG - which will stop inclusion of <signal.h>
* this results in many functions being undeclared which bothers C++
* May make sense to have threads after "*ish.h" anyway
*/
/* clang Thread Safety Analysis/Annotations/Attributes
* http://clang.llvm.org/docs/ThreadSafetyAnalysis.html
*
* Available since clang 3.6-ish (appeared in 3.4, but shaky still in 3.5).
* Apple XCode hijacks __clang_major__ and __clang_minor__
* (6.1 means really clang 3.6), so needs extra hijinks
* (could probably also test the contents of __apple_build_version__).
*/
#if defined(USE_ITHREADS) && defined(I_PTHREAD) && \
defined(__clang__) && \
!defined(PERL_GLOBAL_STRUCT) && \
!defined(PERL_GLOBAL_STRUCT_PRIVATE) && \
!defined(SWIG) && \
((!defined(__apple_build_version__) && \
((__clang_major__ == 3 && __clang_minor__ >= 6) || \
(__clang_major__ >= 4))) || \
(defined(__apple_build_version__) && \
((__clang_major__ == 6 && __clang_minor__ >= 1) || \
(__clang_major__ >= 7))))
# define PERL_TSA__(x) __attribute__((x))
# define PERL_TSA_ACTIVE
#else
# define PERL_TSA__(x) /* No TSA, make TSA attributes no-ops. */
# undef PERL_TSA_ACTIVE
#endif
/* PERL_TSA_CAPABILITY() is used to annotate typedefs.
* typedef old_type PERL_TSA_CAPABILITY("mutex") new_type;
*/
#define PERL_TSA_CAPABILITY(x) \
PERL_TSA__(capability(x))
/* In the below examples the mutex must be lexically visible, usually
* either as global variables, or as function arguments. */
/* PERL_TSA_GUARDED_BY() is used to annotate global variables.
*
* Foo foo PERL_TSA_GUARDED_BY(mutex);
*/
#define PERL_TSA_GUARDED_BY(x) \
PERL_TSA__(guarded_by(x))
/* PERL_TSA_PT_GUARDED_BY() is used to annotate global pointers.
* The data _behind_ the pointer is guarded.
*
* Foo* ptr PERL_TSA_PT_GUARDED_BY(mutex);
*/
#define PERL_TSA_PT_GUARDED_BY(x) \
PERL_TSA__(pt_guarded_by(x))
/* PERL_TSA_REQUIRES() is used to annotate functions.
* The caller MUST hold the resource when calling the function.
*
* void Foo() PERL_TSA_REQUIRES(mutex);
*/
#define PERL_TSA_REQUIRES(x) \
PERL_TSA__(requires_capability(x))
/* PERL_TSA_EXCLUDES() is used to annotate functions.
* The caller MUST NOT hold resource when calling the function.
*
* EXCLUDES should be used when the function first acquires
* the resource and then releases it. Use to avoid deadlock.
*
* void Foo() PERL_TSA_EXCLUDES(mutex);
*/
#define PERL_TSA_EXCLUDES(x) \
PERL_TSA__(locks_excluded(x))
/* PERL_TSA_ACQUIRE() is used to annotate functions.
* The caller MUST NOT hold the resource when calling the function,
* and the function will acquire the resource.
*
* void Foo() PERL_TSA_ACQUIRE(mutex);
*/
#define PERL_TSA_ACQUIRE(x) \
PERL_TSA__(acquire_capability(x))
/* PERL_TSA_RELEASE() is used to annotate functions.
* The caller MUST hold the resource when calling the function,
* and the function will release the resource.
*
* void Foo() PERL_TSA_RELEASE(mutex);
*/
#define PERL_TSA_RELEASE(x) \
PERL_TSA__(release_capability(x))
/* PERL_TSA_NO_TSA is used to annotate functions.
* Used when being intentionally unsafe, or when the code is too
* complicated for the analysis. Use sparingly.
*
* void Foo() PERL_TSA_NO_TSA;
*/
#define PERL_TSA_NO_TSA \
PERL_TSA__(no_thread_safety_analysis)
/* There are more annotations/attributes available, see the clang
* documentation for details. */
#if defined(USE_ITHREADS)
# ifdef NETWARE
# include <nw5thread.h>
# else
# ifdef WIN32
# include <win32thread.h>
# else
# ifdef OS2
# include "os2thread.h"
# else
# ifdef I_MACH_CTHREADS
# include <mach/cthreads.h>
typedef cthread_t perl_os_thread;
typedef mutex_t perl_mutex;
typedef condition_t perl_cond;
typedef void * perl_key;
# else /* Posix threads */
# ifdef I_PTHREAD
# include <pthread.h>
# endif
typedef pthread_t perl_os_thread;
typedef pthread_mutex_t PERL_TSA_CAPABILITY("mutex") perl_mutex;
typedef pthread_cond_t perl_cond;
typedef pthread_key_t perl_key;
# endif /* I_MACH_CTHREADS */
# endif /* OS2 */
# endif /* WIN32 */
# endif /* NETWARE */
#endif /* USE_ITHREADS */
#ifdef PERL_TSA_ACTIVE
/* Since most pthread mutex interfaces have not been annotated, we
* need to have these wrappers. The NO_TSA annotation is quite ugly
* but it cannot be avoided in plain C, unlike in C++, where one could
* e.g. use ACQUIRE() with no arg on a mutex lock method.
*
* The bodies of these wrappers are in util.c
*
* TODO: however, some platforms are starting to get these clang
* thread safety annotations for pthreads, for example FreeBSD.
* Do we need a way to a bypass these wrappers? */
EXTERN_C int perl_tsa_mutex_lock(perl_mutex* mutex)
PERL_TSA_ACQUIRE(*mutex)
PERL_TSA_NO_TSA;
EXTERN_C int perl_tsa_mutex_unlock(perl_mutex* mutex)
PERL_TSA_RELEASE(*mutex)
PERL_TSA_NO_TSA;
#endif
#if defined(WIN32)
# include "win32.h"
#endif
#ifdef NETWARE
# include "netware.h"
#endif
#define STATUS_UNIX PL_statusvalue
#ifdef VMS
# define STATUS_NATIVE PL_statusvalue_vms
/*
* vaxc$errno is only guaranteed to be valid if errno == EVMSERR, otherwise
* its contents can not be trusted. Unfortunately, Perl seems to check
* it on exit, so it when PL_statusvalue_vms is updated, vaxc$errno should
* be updated also.
*/
# include <stsdef.h>
# include <ssdef.h>
/* Presume this because if VMS changes it, it will require a new
* set of APIs for waiting on children for binary compatibility.
*/
# define child_offset_bits (8)
# ifndef C_FAC_POSIX
# define C_FAC_POSIX 0x35A000
# endif
/* STATUS_EXIT - validates and returns a NATIVE exit status code for the
* platform from the existing UNIX or Native status values.
*/
# define STATUS_EXIT \
(((I32)PL_statusvalue_vms == -1 ? SS$_ABORT : PL_statusvalue_vms) | \
(VMSISH_HUSHED ? STS$M_INHIB_MSG : 0))
/* STATUS_NATIVE_CHILD_SET - Calculate UNIX status that matches the child
* exit code and shifts the UNIX value over the correct number of bits to
* be a child status. Usually the number of bits is 8, but that could be
* platform dependent. The NATIVE status code is presumed to have either
* from a child process.
*/
/* This is complicated. The child processes return a true native VMS
status which must be saved. But there is an assumption in Perl that
the UNIX child status has some relationship to errno values, so
Perl tries to translate it to text in some of the tests.
In order to get the string translation correct, for the error, errno
must be EVMSERR, but that generates a different text message
than what the test programs are expecting. So an errno value must
be derived from the native status value when an error occurs.
That will hide the true native status message. With this version of
perl, the true native child status can always be retrieved so that
is not a problem. But in this case, Pl_statusvalue and errno may
have different values in them.
*/
# define STATUS_NATIVE_CHILD_SET(n) \
STMT_START { \
I32 evalue = (I32)n; \
if (evalue == EVMSERR) { \
PL_statusvalue_vms = vaxc$errno; \
PL_statusvalue = evalue; \
} else { \
PL_statusvalue_vms = evalue; \
if (evalue == -1) { \
PL_statusvalue = -1; \
PL_statusvalue_vms = SS$_ABORT; /* Should not happen */ \
} else \
PL_statusvalue = Perl_vms_status_to_unix(evalue, 1); \
set_vaxc_errno(evalue); \
if ((PL_statusvalue_vms & C_FAC_POSIX) == C_FAC_POSIX) \
set_errno(EVMSERR); \
else set_errno(Perl_vms_status_to_unix(evalue, 0)); \
PL_statusvalue = PL_statusvalue << child_offset_bits; \
} \
} STMT_END
# ifdef VMSISH_STATUS
# define STATUS_CURRENT (VMSISH_STATUS ? STATUS_NATIVE : STATUS_UNIX)
# else
# define STATUS_CURRENT STATUS_UNIX
# endif
/* STATUS_UNIX_SET - takes a UNIX/POSIX errno value and attempts to update
* the NATIVE status to an equivalent value. Can not be used to translate
* exit code values as exit code values are not guaranteed to have any
* relationship at all to errno values.
* This is used when Perl is forcing errno to have a specific value.
*/
# define STATUS_UNIX_SET(n) \
STMT_START { \
I32 evalue = (I32)n; \
PL_statusvalue = evalue; \
if (PL_statusvalue != -1) { \
if (PL_statusvalue != EVMSERR) { \
PL_statusvalue &= 0xFFFF; \
if (MY_POSIX_EXIT) \
PL_statusvalue_vms=PL_statusvalue ? SS$_ABORT : SS$_NORMAL;\
else PL_statusvalue_vms = Perl_unix_status_to_vms(evalue); \
} \
else { \
PL_statusvalue_vms = vaxc$errno; \
} \
} \
else PL_statusvalue_vms = SS$_ABORT; \
set_vaxc_errno(PL_statusvalue_vms); \
} STMT_END
/* STATUS_UNIX_EXIT_SET - Takes a UNIX/POSIX exit code and sets
* the NATIVE error status based on it.
*
* When in the default mode to comply with the Perl VMS documentation,
* 0 is a success and any other code sets the NATIVE status to a failure
* code of SS$_ABORT.
*
* In the new POSIX EXIT mode, native status will be set so that the
* actual exit code will can be retrieved by the calling program or
* shell.
*
* If the exit code is not clearly a UNIX parent or child exit status,
* it will be passed through as a VMS status.
*/
# define STATUS_UNIX_EXIT_SET(n) \
STMT_START { \
I32 evalue = (I32)n; \
PL_statusvalue = evalue; \
if (MY_POSIX_EXIT) { \
if (evalue <= 0xFF00) { \
if (evalue > 0xFF) \
evalue = (evalue >> child_offset_bits) & 0xFF; \
PL_statusvalue_vms = \
(C_FAC_POSIX | (evalue << 3 ) | \
((evalue == 1) ? (STS$K_ERROR | STS$M_INHIB_MSG) : 1)); \
} else /* forgive them Perl, for they have sinned */ \
PL_statusvalue_vms = evalue; \
} else { \
if (evalue == 0) \
PL_statusvalue_vms = SS$_NORMAL; \
else if (evalue <= 0xFF00) \
PL_statusvalue_vms = SS$_ABORT; \
else { /* forgive them Perl, for they have sinned */ \
if (evalue != EVMSERR) PL_statusvalue_vms = evalue; \
else PL_statusvalue_vms = vaxc$errno; \
/* And obviously used a VMS status value instead of UNIX */ \
PL_statusvalue = EVMSERR; \
} \
set_vaxc_errno(PL_statusvalue_vms); \
} \
} STMT_END
/* STATUS_EXIT_SET - Takes a NATIVE/UNIX/POSIX exit code
* and sets the NATIVE error status based on it. This special case
* is needed to maintain compatibility with past VMS behavior.
*
* In the default mode on VMS, this number is passed through as
* both the NATIVE and UNIX status. Which makes it different
* that the STATUS_UNIX_EXIT_SET.
*
* In the new POSIX EXIT mode, native status will be set so that the
* actual exit code will can be retrieved by the calling program or
* shell.
*
* A POSIX exit code is from 0 to 255. If the exit code is higher
* than this, it needs to be assumed that it is a VMS exit code and
* passed through.
*/
# define STATUS_EXIT_SET(n) \
STMT_START { \
I32 evalue = (I32)n; \
PL_statusvalue = evalue; \
if (MY_POSIX_EXIT) \
if (evalue > 255) PL_statusvalue_vms = evalue; else { \
PL_statusvalue_vms = \
(C_FAC_POSIX | (evalue << 3 ) | \
((evalue == 1) ? (STS$K_ERROR | STS$M_INHIB_MSG) : 1));} \
else \
PL_statusvalue_vms = evalue ? evalue : SS$_NORMAL; \
set_vaxc_errno(PL_statusvalue_vms); \
} STMT_END
/* This macro forces a success status */
# define STATUS_ALL_SUCCESS \
(PL_statusvalue = 0, PL_statusvalue_vms = SS$_NORMAL)
/* This macro forces a failure status */
# define STATUS_ALL_FAILURE (PL_statusvalue = 1, \
vaxc$errno = PL_statusvalue_vms = MY_POSIX_EXIT ? \
(C_FAC_POSIX | (1 << 3) | STS$K_ERROR | STS$M_INHIB_MSG) : SS$_ABORT)
#elif defined(__amigaos4__)
/* A somewhat experimental attempt to simulate posix return code values */
# define STATUS_NATIVE PL_statusvalue_posix
# define STATUS_NATIVE_CHILD_SET(n) \
STMT_START { \
PL_statusvalue_posix = (n); \
if (PL_statusvalue_posix < 0) { \
PL_statusvalue = -1; \
} \
else { \
PL_statusvalue = n << 8; \
} \
} STMT_END
# define STATUS_UNIX_SET(n) \
STMT_START { \
PL_statusvalue = (n); \
if (PL_statusvalue != -1) \
PL_statusvalue &= 0xFFFF; \
} STMT_END
# define STATUS_UNIX_EXIT_SET(n) STATUS_UNIX_SET(n)
# define STATUS_EXIT_SET(n) STATUS_UNIX_SET(n)
# define STATUS_CURRENT STATUS_UNIX
# define STATUS_EXIT STATUS_UNIX
# define STATUS_ALL_SUCCESS (PL_statusvalue = 0, PL_statusvalue_posix = 0)
# define STATUS_ALL_FAILURE (PL_statusvalue = 1, PL_statusvalue_posix = 1)
#else
# define STATUS_NATIVE PL_statusvalue_posix
# if defined(WCOREDUMP)
# define STATUS_NATIVE_CHILD_SET(n) \
STMT_START { \
PL_statusvalue_posix = (n); \
if (PL_statusvalue_posix == -1) \
PL_statusvalue = -1; \
else { \
PL_statusvalue = \
(WIFEXITED(PL_statusvalue_posix) ? (WEXITSTATUS(PL_statusvalue_posix) << 8) : 0) | \
(WIFSIGNALED(PL_statusvalue_posix) ? (WTERMSIG(PL_statusvalue_posix) & 0x7F) : 0) | \
(WIFSIGNALED(PL_statusvalue_posix) && WCOREDUMP(PL_statusvalue_posix) ? 0x80 : 0); \
} \
} STMT_END
# elif defined(WIFEXITED)
# define STATUS_NATIVE_CHILD_SET(n) \
STMT_START { \
PL_statusvalue_posix = (n); \
if (PL_statusvalue_posix == -1) \
PL_statusvalue = -1; \
else { \
PL_statusvalue = \
(WIFEXITED(PL_statusvalue_posix) ? (WEXITSTATUS(PL_statusvalue_posix) << 8) : 0) | \
(WIFSIGNALED(PL_statusvalue_posix) ? (WTERMSIG(PL_statusvalue_posix) & 0x7F) : 0); \
} \
} STMT_END
# else
# define STATUS_NATIVE_CHILD_SET(n) \
STMT_START { \
PL_statusvalue_posix = (n); \
if (PL_statusvalue_posix == -1) \
PL_statusvalue = -1; \
else { \
PL_statusvalue = \
PL_statusvalue_posix & 0xFFFF; \
} \
} STMT_END
# endif
# define STATUS_UNIX_SET(n) \
STMT_START { \
PL_statusvalue = (n); \
if (PL_statusvalue != -1) \
PL_statusvalue &= 0xFFFF; \
} STMT_END
# define STATUS_UNIX_EXIT_SET(n) STATUS_UNIX_SET(n)
# define STATUS_EXIT_SET(n) STATUS_UNIX_SET(n)
# define STATUS_CURRENT STATUS_UNIX
# define STATUS_EXIT STATUS_UNIX
# define STATUS_ALL_SUCCESS (PL_statusvalue = 0, PL_statusvalue_posix = 0)
# define STATUS_ALL_FAILURE (PL_statusvalue = 1, PL_statusvalue_posix = 1)
#endif
/* flags in PL_exit_flags for nature of exit() */
#define PERL_EXIT_EXPECTED 0x01
#define PERL_EXIT_DESTRUCT_END 0x02 /* Run END in perl_destruct */
#define PERL_EXIT_WARN 0x04 /* Warn if Perl_my_exit() or Perl_my_failure_exit() called */
#define PERL_EXIT_ABORT 0x08 /* Call abort() if Perl_my_exit() or Perl_my_failure_exit() called */
#ifndef PERL_CORE
/* format to use for version numbers in file/directory names */
/* XXX move to Configure? */
/* This was only ever used for the current version, and that can be done at
compile time, as PERL_FS_VERSION, so should we just delete it? */
# ifndef PERL_FS_VER_FMT
# define PERL_FS_VER_FMT "%d.%d.%d"
# endif
#endif
#ifndef PERL_FS_VERSION
# define PERL_FS_VERSION PERL_VERSION_STRING
#endif
/* This defines a way to flush all output buffers. This may be a
* performance issue, so we allow people to disable it. Also, if
* we are using stdio, there are broken implementations of fflush(NULL)
* out there, Solaris being the most prominent.
*/
#ifndef PERL_FLUSHALL_FOR_CHILD
# if defined(USE_PERLIO) || defined(FFLUSH_NULL)
# define PERL_FLUSHALL_FOR_CHILD PerlIO_flush((PerlIO*)NULL)
# else
# ifdef FFLUSH_ALL
# define PERL_FLUSHALL_FOR_CHILD my_fflush_all()
# else
# define PERL_FLUSHALL_FOR_CHILD NOOP
# endif
# endif
#endif
#ifndef PERL_WAIT_FOR_CHILDREN
# define PERL_WAIT_FOR_CHILDREN NOOP
#endif
/* the traditional thread-unsafe notion of "current interpreter". */
#ifndef PERL_SET_INTERP
# define PERL_SET_INTERP(i) (PL_curinterp = (PerlInterpreter*)(i))
#endif
#ifndef PERL_GET_INTERP
# define PERL_GET_INTERP (PL_curinterp)
#endif
#if defined(PERL_IMPLICIT_CONTEXT) && !defined(PERL_GET_THX)
# ifdef MULTIPLICITY
# define PERL_GET_THX ((PerlInterpreter *)PERL_GET_CONTEXT)
# endif
# define PERL_SET_THX(t) PERL_SET_CONTEXT(t)
#endif
/*
This replaces the previous %_ "hack" by the "%p" hacks.
All that is required is that the perl source does not
use "%-p" or "%-<number>p" or "%<number>p" formats.
These formats will still work in perl code.
See comments in sv.c for further details.
Robin Barker 2005-07-14
No longer use %1p for VDf = %vd. RMB 2007-10-19
*/
#ifndef SVf_
# define SVf_(n) "-" STRINGIFY(n) "p"
#endif
#ifndef SVf
# define SVf "-p"
#endif
#ifndef SVf32
# define SVf32 SVf_(32)
#endif
#ifndef SVf256
# define SVf256 SVf_(256)
#endif
#define SVfARG(p) ((void*)(p))
#ifndef HEKf
# define HEKf "2p"
#endif
/* Not ideal, but we cannot easily include a number in an already-numeric
* format sequence. */
#ifndef HEKf256
# define HEKf256 "3p"
#endif
#define HEKfARG(p) ((void*)(p))
/* Takes three arguments: is_utf8, length, str */
#ifndef UTF8f
# define UTF8f "d%" UVuf "%4p"
#endif
#define UTF8fARG(u,l,p) (int)cBOOL(u), (UV)(l), (void*)(p)
#define PNf UTF8f
#define PNfARG(pn) (int)1, (UV)PadnameLEN(pn), (void *)PadnamePV(pn)
#ifdef PERL_CORE
/* not used; but needed for backward compatibility with XS code? - RMB */
# undef UVf
#else
# ifndef UVf
# define UVf UVuf
# endif
#endif
#ifdef HASATTRIBUTE_DEPRECATED
# define __attribute__deprecated__ __attribute__((deprecated))
#endif
#ifdef HASATTRIBUTE_FORMAT
# define __attribute__format__(x,y,z) __attribute__((format(x,y,z)))
#endif
#ifdef HASATTRIBUTE_MALLOC
# define __attribute__malloc__ __attribute__((__malloc__))
#endif
#ifdef HASATTRIBUTE_NONNULL
# define __attribute__nonnull__(a) __attribute__((nonnull(a)))
#endif
#ifdef HASATTRIBUTE_NORETURN
# define __attribute__noreturn__ __attribute__((noreturn))
#endif
#ifdef HASATTRIBUTE_PURE
# define __attribute__pure__ __attribute__((pure))
#endif
#ifdef HASATTRIBUTE_UNUSED
# define __attribute__unused__ __attribute__((unused))
#endif
#ifdef HASATTRIBUTE_WARN_UNUSED_RESULT
# define __attribute__warn_unused_result__ __attribute__((warn_unused_result))
#endif
/* If we haven't defined the attributes yet, define them to blank. */
#ifndef __attribute__deprecated__
# define __attribute__deprecated__
#endif
#ifndef __attribute__format__
# define __attribute__format__(x,y,z)
#endif
#ifndef __attribute__malloc__
# define __attribute__malloc__
#endif
#ifndef __attribute__nonnull__
# define __attribute__nonnull__(a)
#endif
#ifndef __attribute__noreturn__
# define __attribute__noreturn__
#endif
#ifndef __attribute__pure__
# define __attribute__pure__
#endif
#ifndef __attribute__unused__
# define __attribute__unused__
#endif
#ifndef __attribute__warn_unused_result__
# define __attribute__warn_unused_result__
#endif
#ifdef I_ASSERT
# if !defined(DEBUGGING) && !defined(NDEBUG)
# define NDEBUG 1
# endif
# include <assert.h>
#endif
/* For functions that are marked as __attribute__noreturn__, it's not
appropriate to call return. In either case, include the lint directive.
*/
#ifdef HASATTRIBUTE_NORETURN
# define NORETURN_FUNCTION_END NOT_REACHED;
#else
# define NORETURN_FUNCTION_END NOT_REACHED; return 0
#endif
/* Some OS warn on NULL format to printf */
#ifdef PRINTF_FORMAT_NULL_OK
# define __attribute__format__null_ok__(x,y,z) __attribute__format__(x,y,z)
#else
# define __attribute__format__null_ok__(x,y,z)
#endif
#ifdef HAS_BUILTIN_EXPECT
# define EXPECT(expr,val) __builtin_expect(expr,val)
#else
# define EXPECT(expr,val) (expr)
#endif
#define LIKELY(cond) EXPECT(cBOOL(cond),TRUE)
#define UNLIKELY(cond) EXPECT(cBOOL(cond),FALSE)
#ifdef HAS_BUILTIN_CHOOSE_EXPR
/* placeholder */
#endif
/* STATIC_ASSERT_GLOBAL/STATIC_ASSERT_STMT are like assert(), but for compile
time invariants. That is, their argument must be a constant expression that
can be verified by the compiler. This expression can contain anything that's
known to the compiler, e.g. #define constants, enums, or sizeof (...). If
the expression evaluates to 0, compilation fails.
Because they generate no runtime code (i.e. their use is "free"), they're
always active, even under non-DEBUGGING builds.
STATIC_ASSERT_GLOBAL expands to a declaration and is suitable for use at
file scope (outside of any function).
STATIC_ASSERT_STMT expands to a statement and is suitable for use inside a
function.
*/
#if (defined(static_assert) || (defined(__cplusplus) && __cplusplus >= 201103L)) && (!defined(__IBMC__) || __IBMC__ >= 1210)
/* static_assert is a macro defined in <assert.h> in C11 or a compiler
builtin in C++11.
*/
/* IBM XL C V11 does not support _Static_assert, no matter what <assert.h> says */
# define STATIC_ASSERT_GLOBAL(COND) static_assert(COND, #COND)
#else
/* We use a bit-field instead of an array because gcc accepts
'typedef char x[n]' where n is not a compile-time constant.
We want to enforce constantness.
*/
# define STATIC_ASSERT_2(COND, SUFFIX) \
typedef struct { \
unsigned int _static_assertion_failed_##SUFFIX : (COND) ? 1 : -1; \
} _static_assertion_failed_##SUFFIX PERL_UNUSED_DECL
# define STATIC_ASSERT_1(COND, SUFFIX) STATIC_ASSERT_2(COND, SUFFIX)
# define STATIC_ASSERT_GLOBAL(COND) STATIC_ASSERT_1(COND, __LINE__)
#endif
/* We need this wrapper even in C11 because 'case X: static_assert(...);' is an
error (static_assert is a declaration, and only statements can have labels).
*/
#define STATIC_ASSERT_STMT(COND) do { STATIC_ASSERT_GLOBAL(COND); } while (0)
#ifndef __has_builtin
# define __has_builtin(x) 0 /* not a clang style compiler */
#endif
/* ASSUME is like assert(), but it has a benefit in a release build. It is a
hint to a compiler about a statement of fact in a function call free
expression, which allows the compiler to generate better machine code.
In a debug build, ASSUME(x) is a synonym for assert(x). ASSUME(0) means
the control path is unreachable. In a for loop, ASSUME can be used to hint
that a loop will run at least X times. ASSUME is based off MSVC's __assume
intrinsic function, see its documents for more details.
*/
#ifndef DEBUGGING
# if __has_builtin(__builtin_unreachable) \
|| (__GNUC__ == 4 && __GNUC_MINOR__ >= 5 || __GNUC__ > 4) /* 4.5 -> */
# define ASSUME(x) ((x) ? (void) 0 : __builtin_unreachable())
# elif defined(_MSC_VER)
# define ASSUME(x) __assume(x)
# elif defined(__ARMCC_VERSION) /* untested */
# define ASSUME(x) __promise(x)
# else
/* a random compiler might define assert to its own special optimization token
so pass it through to C lib as a last resort */
# define ASSUME(x) assert(x)
# endif
#else
# define ASSUME(x) assert(x)
#endif
#define NOT_REACHED ASSUME(0)
/* Some unistd.h's give a prototype for pause() even though
HAS_PAUSE ends up undefined. This causes the #define
below to be rejected by the compiler. Sigh.
*/
#ifdef HAS_PAUSE
#define Pause pause
#else
#define Pause() sleep((32767<<16)+32767)
#endif
#ifndef IOCPARM_LEN
# ifdef IOCPARM_MASK
/* on BSDish systems we're safe */
# define IOCPARM_LEN(x) (((x) >> 16) & IOCPARM_MASK)
# else
# if defined(_IOC_SIZE) && defined(__GLIBC__)
/* on Linux systems we're safe; except when we're not [perl #38223] */
# define IOCPARM_LEN(x) (_IOC_SIZE(x) < 256 ? 256 : _IOC_SIZE(x))
# else
/* otherwise guess at what's safe */
# define IOCPARM_LEN(x) 256
# endif
# endif
#endif
#if defined(__CYGWIN__)
/* USEMYBINMODE
* This symbol, if defined, indicates that the program should
* use the routine my_binmode(FILE *fp, char iotype, int mode) to insure
* that a file is in "binary" mode -- that is, that no translation
* of bytes occurs on read or write operations.
*/
# define USEMYBINMODE /**/
# include <io.h> /* for setmode() prototype */
# define my_binmode(fp, iotype, mode) \
cBOOL(PerlLIO_setmode(fileno(fp), mode) != -1)
#endif
#ifdef __CYGWIN__
void init_os_extras(void);
#endif
#ifdef UNION_ANY_DEFINITION
UNION_ANY_DEFINITION;
#else
union any {
void* any_ptr;
SV* any_sv;
SV** any_svp;
GV* any_gv;
AV* any_av;
HV* any_hv;
OP* any_op;
char* any_pv;
char** any_pvp;
I32 any_i32;
U32 any_u32;
IV any_iv;
UV any_uv;
long any_long;
bool any_bool;
void (*any_dptr) (void*);
void (*any_dxptr) (pTHX_ void*);
};
#endif
typedef I32 (*filter_t) (pTHX_ int, SV *, int);
#define FILTER_READ(idx, sv, len) filter_read(idx, sv, len)
#define FILTER_DATA(idx) \
(PL_parser ? AvARRAY(PL_parser->rsfp_filters)[idx] : NULL)
#define FILTER_ISREADER(idx) \
(PL_parser && PL_parser->rsfp_filters \
&& idx >= AvFILLp(PL_parser->rsfp_filters))
#define PERL_FILTER_EXISTS(i) \
(PL_parser && PL_parser->rsfp_filters \
&& (i) <= av_tindex(PL_parser->rsfp_filters))
#if defined(_AIX) && !defined(_AIX43)
#if defined(USE_REENTRANT) || defined(_REENTRANT) || defined(_THREAD_SAFE)
/* We cannot include <crypt.h> to get the struct crypt_data
* because of setkey prototype problems when threading */
typedef struct crypt_data { /* straight from /usr/include/crypt.h */
/* From OSF, Not needed in AIX
char C[28], D[28];
*/
char E[48];
char KS[16][48];
char block[66];
char iobuf[16];
} CRYPTD;
#endif /* threading */
#endif /* AIX */
#ifndef PERL_CALLCONV
# ifdef __cplusplus
# define PERL_CALLCONV extern "C"
# else
# define PERL_CALLCONV
# endif
#endif
#ifndef PERL_CALLCONV_NO_RET
# define PERL_CALLCONV_NO_RET PERL_CALLCONV
#endif
/* PERL_STATIC_NO_RET is supposed to be equivalent to STATIC on builds that
dont have a noreturn as a declaration specifier
*/
#ifndef PERL_STATIC_NO_RET
# define PERL_STATIC_NO_RET STATIC
#endif
/* PERL_STATIC_NO_RET is supposed to be equivalent to PERL_STATIC_INLINE on
builds that dont have a noreturn as a declaration specifier
*/
#ifndef PERL_STATIC_INLINE_NO_RET
# define PERL_STATIC_INLINE_NO_RET PERL_STATIC_INLINE
#endif
#if !defined(OS2)
# include "iperlsys.h"
#endif
#ifdef __LIBCATAMOUNT__
#undef HAS_PASSWD /* unixish.h but not unixish enough. */
#undef HAS_GROUP
#define FAKE_BIT_BUCKET
#endif
/* [perl #22371] Algorimic Complexity Attack on Perl 5.6.1, 5.8.0.
* Note that the USE_HASH_SEED and USE_HASH_SEED_EXPLICIT are *NOT*
* defined by Configure, despite their names being similar to the
* other defines like USE_ITHREADS. Configure in fact knows nothing
* about the randomised hashes. Therefore to enable/disable the hash
* randomisation defines use the Configure -Accflags=... instead. */
#if !defined(NO_HASH_SEED) && !defined(USE_HASH_SEED) && !defined(USE_HASH_SEED_EXPLICIT)
# define USE_HASH_SEED
#endif
#include "perly.h"
/* macros to define bit-fields in structs. */
#ifndef PERL_BITFIELD8
# define PERL_BITFIELD8 unsigned
#endif
#ifndef PERL_BITFIELD16
# define PERL_BITFIELD16 unsigned
#endif
#ifndef PERL_BITFIELD32
# define PERL_BITFIELD32 unsigned
#endif
#include "sv.h"
#include "regexp.h"
#include "util.h"
#include "form.h"
#include "gv.h"
#include "pad.h"
#include "cv.h"
#include "opnames.h"
#include "op.h"
#include "hv.h"
#include "cop.h"
#include "av.h"
#include "mg.h"
#include "scope.h"
#include "warnings.h"
#include "utf8.h"
/* these would be in doio.h if there was such a file */
#define my_stat() my_stat_flags(SV_GMAGIC)
#define my_lstat() my_lstat_flags(SV_GMAGIC)
/* defined in sv.c, but also used in [ach]v.c */
#undef _XPV_HEAD
#undef _XPVMG_HEAD
#undef _XPVCV_COMMON
#include "parser.h"
typedef struct magic_state MGS; /* struct magic_state defined in mg.c */
#if defined(PERL_IN_REGCOMP_C) || defined(PERL_IN_REGEXEC_C)
/* These have to be predeclared, as they are used in proto.h which is #included
* before their definitions in regcomp.h. */
struct scan_data_t;
typedef struct regnode_charclass regnode_charclass;
struct regnode_charclass_class;
/* A hopefully less confusing name. The sub-classes are all Posix classes only
* used under /l matching */
typedef struct regnode_charclass_class regnode_charclass_posixl;
typedef struct regnode_ssc regnode_ssc;
typedef struct RExC_state_t RExC_state_t;
struct _reg_trie_data;
#endif
struct ptr_tbl_ent {
struct ptr_tbl_ent* next;
const void* oldval;
void* newval;
};
struct ptr_tbl {
struct ptr_tbl_ent** tbl_ary;
UV tbl_max;
UV tbl_items;
struct ptr_tbl_arena *tbl_arena;
struct ptr_tbl_ent *tbl_arena_next;
struct ptr_tbl_ent *tbl_arena_end;
};
#if defined(htonl) && !defined(HAS_HTONL)
#define HAS_HTONL
#endif
#if defined(htons) && !defined(HAS_HTONS)
#define HAS_HTONS
#endif
#if defined(ntohl) && !defined(HAS_NTOHL)
#define HAS_NTOHL
#endif
#if defined(ntohs) && !defined(HAS_NTOHS)
#define HAS_NTOHS
#endif
#ifndef HAS_HTONL
#define HAS_HTONS
#define HAS_HTONL
#define HAS_NTOHS
#define HAS_NTOHL
# if (BYTEORDER & 0xffff) == 0x4321
/* Big endian system, so ntohl, ntohs, htonl and htons do not need to
re-order their values. However, to behave identically to the alternative
implementations, they should truncate to the correct size. */
# define ntohl(x) ((x)&0xFFFFFFFF)
# define htonl(x) ntohl(x)
# define ntohs(x) ((x)&0xFFFF)
# define htons(x) ntohs(x)
# elif BYTEORDER == 0x1234 || BYTEORDER == 0x12345678
/* Note that we can't straight out declare our own htonl and htons because
the Win32 build process forcibly undefines HAS_HTONL etc for its miniperl,
to avoid the overhead of initialising the socket subsystem, but the headers
that *declare* the various functions are still seen. If we declare our own
htonl etc they will clash with the declarations in the Win32 headers. */
PERL_STATIC_INLINE U32
my_swap32(const U32 x) {
return ((x & 0xFF) << 24) | ((x >> 24) & 0xFF)
| ((x & 0x0000FF00) << 8) | ((x & 0x00FF0000) >> 8);
}
PERL_STATIC_INLINE U16
my_swap16(const U16 x) {
return ((x & 0xFF) << 8) | ((x >> 8) & 0xFF);
}
# define htonl(x) my_swap32(x)
# define ntohl(x) my_swap32(x)
# define ntohs(x) my_swap16(x)
# define htons(x) my_swap16(x)
# else
# error "Unsupported byteorder"
/* The C pre-processor doesn't let us return the value of BYTEORDER as part of
the error message. Please check the value of the macro BYTEORDER, as defined
in config.h. The values of BYTEORDER we expect are
big endian little endian
32 bit 0x4321 0x1234
64 bit 0x87654321 0x12345678
If you have a system with a different byte order, please see
pod/perlhack.pod for how to submit a patch to add supporting code.
*/
# endif
#endif
/*
* Little-endian byte order functions - 'v' for 'VAX', or 'reVerse'.
* -DWS
*/
#if BYTEORDER == 0x1234 || BYTEORDER == 0x12345678
/* Little endian system, so vtohl, vtohs, htovl and htovs do not need to
re-order their values. However, to behave identically to the alternative
implementations, they should truncate to the correct size. */
# define vtohl(x) ((x)&0xFFFFFFFF)
# define vtohs(x) ((x)&0xFFFF)
# define htovl(x) vtohl(x)
# define htovs(x) vtohs(x)
#elif BYTEORDER == 0x4321 || BYTEORDER == 0x87654321
# define vtohl(x) ((((x)&0xFF)<<24) \
+(((x)>>24)&0xFF) \
+(((x)&0x0000FF00)<<8) \
+(((x)&0x00FF0000)>>8) )
# define vtohs(x) ((((x)&0xFF)<<8) + (((x)>>8)&0xFF))
# define htovl(x) vtohl(x)
# define htovs(x) vtohs(x)
#else
# error "Unsupported byteorder"
/* If you have need for current perl on PDP-11 or similar, and can help test
that blead keeps working on a mixed-endian system, then see
pod/perlhack.pod for how to submit patches to things working again. */
#endif
/* *MAX Plus 1. A floating point value.
Hopefully expressed in a way that dodgy floating point can't mess up.
>> 2 rather than 1, so that value is safely less than I32_MAX after 1
is added to it
May find that some broken compiler will want the value cast to I32.
[after the shift, as signed >> may not be as secure as unsigned >>]
*/
#define I32_MAX_P1 (2.0 * (1 + (((U32)I32_MAX) >> 1)))
#define U32_MAX_P1 (4.0 * (1 + ((U32_MAX) >> 2)))
/* For compilers that can't correctly cast NVs over 0x7FFFFFFF (or
0x7FFFFFFFFFFFFFFF) to an unsigned integer. In the future, sizeof(UV)
may be greater than sizeof(IV), so don't assume that half max UV is max IV.
*/
#define U32_MAX_P1_HALF (2.0 * (1 + ((U32_MAX) >> 2)))
#define UV_MAX_P1 (4.0 * (1 + ((UV_MAX) >> 2)))
#define IV_MAX_P1 (2.0 * (1 + (((UV)IV_MAX) >> 1)))
#define UV_MAX_P1_HALF (2.0 * (1 + ((UV_MAX) >> 2)))
/* This may look like unnecessary jumping through hoops, but converting
out of range floating point values to integers *is* undefined behaviour,
and it is starting to bite.
*/
#ifndef CAST_INLINE
#define I_32(what) (cast_i32((NV)(what)))
#define U_32(what) (cast_ulong((NV)(what)))
#define I_V(what) (cast_iv((NV)(what)))
#define U_V(what) (cast_uv((NV)(what)))
#else
#define I_32(n) ((n) < I32_MAX_P1 ? ((n) < I32_MIN ? I32_MIN : (I32) (n)) \
: ((n) < U32_MAX_P1 ? (I32)(U32) (n) \
: ((n) > 0 ? (I32) U32_MAX : 0 /* NaN */)))
#define U_32(n) ((n) < 0.0 ? ((n) < I32_MIN ? (UV) I32_MIN : (U32)(I32) (n)) \
: ((n) < U32_MAX_P1 ? (U32) (n) \
: ((n) > 0 ? U32_MAX : 0 /* NaN */)))
#define I_V(n) (LIKELY((n) < IV_MAX_P1) ? (UNLIKELY((n) < IV_MIN) ? IV_MIN : (IV) (n)) \
: (LIKELY((n) < UV_MAX_P1) ? (IV)(UV) (n) \
: ((n) > 0 ? (IV)UV_MAX : 0 /* NaN */)))
#define U_V(n) ((n) < 0.0 ? (UNLIKELY((n) < IV_MIN) ? (UV) IV_MIN : (UV)(IV) (n)) \
: (LIKELY((n) < UV_MAX_P1) ? (UV) (n) \
: ((n) > 0 ? UV_MAX : 0 /* NaN */)))
#endif
#define U_S(what) ((U16)U_32(what))
#define U_I(what) ((unsigned int)U_32(what))
#define U_L(what) U_32(what)
#ifdef HAS_SIGNBIT
# define Perl_signbit signbit
#endif
/* These do not care about the fractional part, only about the range. */
#define NV_WITHIN_IV(nv) (I_V(nv) >= IV_MIN && I_V(nv) <= IV_MAX)
#define NV_WITHIN_UV(nv) ((nv)>=0.0 && U_V(nv) >= UV_MIN && U_V(nv) <= UV_MAX)
/* Used with UV/IV arguments: */
/* XXXX: need to speed it up */
#define CLUMP_2UV(iv) ((iv) < 0 ? 0 : (UV)(iv))
#define CLUMP_2IV(uv) ((uv) > (UV)IV_MAX ? IV_MAX : (IV)(uv))
#ifndef MAXSYSFD
# define MAXSYSFD 2
#endif
#ifndef __cplusplus
#if !(defined(WIN32) || defined(UNDER_CE) || defined(SYMBIAN))
Uid_t getuid (void);
Uid_t geteuid (void);
Gid_t getgid (void);
Gid_t getegid (void);
#endif
#endif
#ifndef Perl_debug_log
# define Perl_debug_log PerlIO_stderr()
#endif
#ifndef Perl_error_log
# define Perl_error_log (PL_stderrgv \
&& isGV(PL_stderrgv) \
&& GvIOp(PL_stderrgv) \
&& IoOFP(GvIOp(PL_stderrgv)) \
? IoOFP(GvIOp(PL_stderrgv)) \
: PerlIO_stderr())
#endif
#define DEBUG_p_FLAG 0x00000001 /* 1 */
#define DEBUG_s_FLAG 0x00000002 /* 2 */
#define DEBUG_l_FLAG 0x00000004 /* 4 */
#define DEBUG_t_FLAG 0x00000008 /* 8 */
#define DEBUG_o_FLAG 0x00000010 /* 16 */
#define DEBUG_c_FLAG 0x00000020 /* 32 */
#define DEBUG_P_FLAG 0x00000040 /* 64 */
#define DEBUG_m_FLAG 0x00000080 /* 128 */
#define DEBUG_f_FLAG 0x00000100 /* 256 */
#define DEBUG_r_FLAG 0x00000200 /* 512 */
#define DEBUG_x_FLAG 0x00000400 /* 1024 */
#define DEBUG_u_FLAG 0x00000800 /* 2048 */
/* U is reserved for Unofficial, exploratory hacking */
#define DEBUG_U_FLAG 0x00001000 /* 4096 */
#define DEBUG_H_FLAG 0x00002000 /* 8192 */
#define DEBUG_X_FLAG 0x00004000 /* 16384 */
#define DEBUG_D_FLAG 0x00008000 /* 32768 */
#define DEBUG_S_FLAG 0x00010000 /* 65536 */
#define DEBUG_T_FLAG 0x00020000 /* 131072 */
#define DEBUG_R_FLAG 0x00040000 /* 262144 */
#define DEBUG_J_FLAG 0x00080000 /* 524288 */
#define DEBUG_v_FLAG 0x00100000 /*1048576 */
#define DEBUG_C_FLAG 0x00200000 /*2097152 */
#define DEBUG_A_FLAG 0x00400000 /*4194304 */
#define DEBUG_q_FLAG 0x00800000 /*8388608 */
#define DEBUG_M_FLAG 0x01000000 /*16777216*/
#define DEBUG_B_FLAG 0x02000000 /*33554432*/
#define DEBUG_L_FLAG 0x04000000 /*67108864*/
#define DEBUG_i_FLAG 0x08000000 /*134217728*/
#define DEBUG_MASK 0x0FFFEFFF /* mask of all the standard flags */
#define DEBUG_DB_RECURSE_FLAG 0x40000000
#define DEBUG_TOP_FLAG 0x80000000 /* -D was given --> PL_debug |= FLAG */
# define DEBUG_p_TEST_ UNLIKELY(PL_debug & DEBUG_p_FLAG)
# define DEBUG_s_TEST_ UNLIKELY(PL_debug & DEBUG_s_FLAG)
# define DEBUG_l_TEST_ UNLIKELY(PL_debug & DEBUG_l_FLAG)
# define DEBUG_t_TEST_ UNLIKELY(PL_debug & DEBUG_t_FLAG)
# define DEBUG_o_TEST_ UNLIKELY(PL_debug & DEBUG_o_FLAG)
# define DEBUG_c_TEST_ UNLIKELY(PL_debug & DEBUG_c_FLAG)
# define DEBUG_P_TEST_ UNLIKELY(PL_debug & DEBUG_P_FLAG)
# define DEBUG_m_TEST_ UNLIKELY(PL_debug & DEBUG_m_FLAG)
# define DEBUG_f_TEST_ UNLIKELY(PL_debug & DEBUG_f_FLAG)
# define DEBUG_r_TEST_ UNLIKELY(PL_debug & DEBUG_r_FLAG)
# define DEBUG_x_TEST_ UNLIKELY(PL_debug & DEBUG_x_FLAG)
# define DEBUG_u_TEST_ UNLIKELY(PL_debug & DEBUG_u_FLAG)
# define DEBUG_U_TEST_ UNLIKELY(PL_debug & DEBUG_U_FLAG)
# define DEBUG_H_TEST_ UNLIKELY(PL_debug & DEBUG_H_FLAG)
# define DEBUG_X_TEST_ UNLIKELY(PL_debug & DEBUG_X_FLAG)
# define DEBUG_D_TEST_ UNLIKELY(PL_debug & DEBUG_D_FLAG)
# define DEBUG_S_TEST_ UNLIKELY(PL_debug & DEBUG_S_FLAG)
# define DEBUG_T_TEST_ UNLIKELY(PL_debug & DEBUG_T_FLAG)
# define DEBUG_R_TEST_ UNLIKELY(PL_debug & DEBUG_R_FLAG)
# define DEBUG_J_TEST_ UNLIKELY(PL_debug & DEBUG_J_FLAG)
# define DEBUG_v_TEST_ UNLIKELY(PL_debug & DEBUG_v_FLAG)
# define DEBUG_C_TEST_ UNLIKELY(PL_debug & DEBUG_C_FLAG)
# define DEBUG_A_TEST_ UNLIKELY(PL_debug & DEBUG_A_FLAG)
# define DEBUG_q_TEST_ UNLIKELY(PL_debug & DEBUG_q_FLAG)
# define DEBUG_M_TEST_ UNLIKELY(PL_debug & DEBUG_M_FLAG)
# define DEBUG_B_TEST_ UNLIKELY(PL_debug & DEBUG_B_FLAG)
# define DEBUG_L_TEST_ UNLIKELY(PL_debug & DEBUG_L_FLAG)
# define DEBUG_i_TEST_ UNLIKELY(PL_debug & DEBUG_i_FLAG)
# define DEBUG_Xv_TEST_ (DEBUG_X_TEST_ && DEBUG_v_TEST_)
# define DEBUG_Uv_TEST_ (DEBUG_U_TEST_ && DEBUG_v_TEST_)
# define DEBUG_Pv_TEST_ (DEBUG_P_TEST_ && DEBUG_v_TEST_)
# define DEBUG_Lv_TEST_ (DEBUG_L_TEST_ && DEBUG_v_TEST_)
#ifdef DEBUGGING
# define DEBUG_p_TEST DEBUG_p_TEST_
# define DEBUG_s_TEST DEBUG_s_TEST_
# define DEBUG_l_TEST DEBUG_l_TEST_
# define DEBUG_t_TEST DEBUG_t_TEST_
# define DEBUG_o_TEST DEBUG_o_TEST_
# define DEBUG_c_TEST DEBUG_c_TEST_
# define DEBUG_P_TEST DEBUG_P_TEST_
# define DEBUG_m_TEST DEBUG_m_TEST_
# define DEBUG_f_TEST DEBUG_f_TEST_
# define DEBUG_r_TEST DEBUG_r_TEST_
# define DEBUG_x_TEST DEBUG_x_TEST_
# define DEBUG_u_TEST DEBUG_u_TEST_
# define DEBUG_U_TEST DEBUG_U_TEST_
# define DEBUG_H_TEST DEBUG_H_TEST_
# define DEBUG_X_TEST DEBUG_X_TEST_
# define DEBUG_D_TEST DEBUG_D_TEST_
# define DEBUG_S_TEST DEBUG_S_TEST_
# define DEBUG_T_TEST DEBUG_T_TEST_
# define DEBUG_R_TEST DEBUG_R_TEST_
# define DEBUG_J_TEST DEBUG_J_TEST_
# define DEBUG_v_TEST DEBUG_v_TEST_
# define DEBUG_C_TEST DEBUG_C_TEST_
# define DEBUG_A_TEST DEBUG_A_TEST_
# define DEBUG_q_TEST DEBUG_q_TEST_
# define DEBUG_M_TEST DEBUG_M_TEST_
# define DEBUG_B_TEST DEBUG_B_TEST_
# define DEBUG_L_TEST DEBUG_L_TEST_
# define DEBUG_i_TEST DEBUG_i_TEST_
# define DEBUG_Xv_TEST DEBUG_Xv_TEST_
# define DEBUG_Uv_TEST DEBUG_Uv_TEST_
# define DEBUG_Pv_TEST DEBUG_Pv_TEST_
# define DEBUG_Lv_TEST DEBUG_Lv_TEST_
# define PERL_DEB(a) a
# define PERL_DEB2(a,b) a
# define PERL_DEBUG(a) if (PL_debug) a
# define DEBUG_p(a) if (DEBUG_p_TEST) a
# define DEBUG_s(a) if (DEBUG_s_TEST) a
# define DEBUG_l(a) if (DEBUG_l_TEST) a
# define DEBUG_t(a) if (DEBUG_t_TEST) a
# define DEBUG_o(a) if (DEBUG_o_TEST) a
# define DEBUG_c(a) if (DEBUG_c_TEST) a
# define DEBUG_P(a) if (DEBUG_P_TEST) a
/* Temporarily turn off memory debugging in case the a
* does memory allocation, either directly or indirectly. */
# define DEBUG_m(a) \
STMT_START { \
if (PERL_GET_INTERP) { \
dTHX; \
if (DEBUG_m_TEST) { \
PL_debug &= ~DEBUG_m_FLAG; \
a; \
PL_debug |= DEBUG_m_FLAG; \
} \
} \
} STMT_END
# define DEBUG__(t, a) \
STMT_START { \
if (t) STMT_START {a;} STMT_END; \
} STMT_END
# define DEBUG_f(a) DEBUG__(DEBUG_f_TEST, a)
#ifndef PERL_EXT_RE_BUILD
# define DEBUG_r(a) DEBUG__(DEBUG_r_TEST, a)
#else
# define DEBUG_r(a) STMT_START {a;} STMT_END
#endif /* PERL_EXT_RE_BUILD */
# define DEBUG_x(a) DEBUG__(DEBUG_x_TEST, a)
# define DEBUG_u(a) DEBUG__(DEBUG_u_TEST, a)
# define DEBUG_U(a) DEBUG__(DEBUG_U_TEST, a)
# define DEBUG_H(a) DEBUG__(DEBUG_H_TEST, a)
# define DEBUG_X(a) DEBUG__(DEBUG_X_TEST, a)
# define DEBUG_D(a) DEBUG__(DEBUG_D_TEST, a)
# define DEBUG_Xv(a) DEBUG__(DEBUG_Xv_TEST, a)
# define DEBUG_Uv(a) DEBUG__(DEBUG_Uv_TEST, a)
# define DEBUG_Pv(a) DEBUG__(DEBUG_Pv_TEST, a)
# define DEBUG_Lv(a) DEBUG__(DEBUG_Lv_TEST, a)
# define DEBUG_S(a) DEBUG__(DEBUG_S_TEST, a)
# define DEBUG_T(a) DEBUG__(DEBUG_T_TEST, a)
# define DEBUG_R(a) DEBUG__(DEBUG_R_TEST, a)
# define DEBUG_v(a) DEBUG__(DEBUG_v_TEST, a)
# define DEBUG_C(a) DEBUG__(DEBUG_C_TEST, a)
# define DEBUG_A(a) DEBUG__(DEBUG_A_TEST, a)
# define DEBUG_q(a) DEBUG__(DEBUG_q_TEST, a)
# define DEBUG_M(a) DEBUG__(DEBUG_M_TEST, a)
# define DEBUG_B(a) DEBUG__(DEBUG_B_TEST, a)
# define DEBUG_L(a) DEBUG__(DEBUG_L_TEST, a)
# define DEBUG_i(a) DEBUG__(DEBUG_i_TEST, a)
#else /* DEBUGGING */
# define DEBUG_p_TEST (0)
# define DEBUG_s_TEST (0)
# define DEBUG_l_TEST (0)
# define DEBUG_t_TEST (0)
# define DEBUG_o_TEST (0)
# define DEBUG_c_TEST (0)
# define DEBUG_P_TEST (0)
# define DEBUG_m_TEST (0)
# define DEBUG_f_TEST (0)
# define DEBUG_r_TEST (0)
# define DEBUG_x_TEST (0)
# define DEBUG_u_TEST (0)
# define DEBUG_U_TEST (0)
# define DEBUG_H_TEST (0)
# define DEBUG_X_TEST (0)
# define DEBUG_D_TEST (0)
# define DEBUG_S_TEST (0)
# define DEBUG_T_TEST (0)
# define DEBUG_R_TEST (0)
# define DEBUG_J_TEST (0)
# define DEBUG_v_TEST (0)
# define DEBUG_C_TEST (0)
# define DEBUG_A_TEST (0)
# define DEBUG_q_TEST (0)
# define DEBUG_M_TEST (0)
# define DEBUG_B_TEST (0)
# define DEBUG_L_TEST (0)
# define DEBUG_i_TEST (0)
# define DEBUG_Xv_TEST (0)
# define DEBUG_Uv_TEST (0)
# define DEBUG_Pv_TEST (0)
# define DEBUG_Lv_TEST (0)
# define PERL_DEB(a)
# define PERL_DEB2(a,b) b
# define PERL_DEBUG(a)
# define DEBUG_p(a)
# define DEBUG_s(a)
# define DEBUG_l(a)
# define DEBUG_t(a)
# define DEBUG_o(a)
# define DEBUG_c(a)
# define DEBUG_P(a)
# define DEBUG_m(a)
# define DEBUG_f(a)
# define DEBUG_r(a)
# define DEBUG_x(a)
# define DEBUG_u(a)
# define DEBUG_U(a)
# define DEBUG_H(a)
# define DEBUG_X(a)
# define DEBUG_D(a)
# define DEBUG_S(a)
# define DEBUG_T(a)
# define DEBUG_R(a)
# define DEBUG_v(a)
# define DEBUG_C(a)
# define DEBUG_A(a)
# define DEBUG_q(a)
# define DEBUG_M(a)
# define DEBUG_B(a)
# define DEBUG_L(a)
# define DEBUG_i(a)
# define DEBUG_Xv(a)
# define DEBUG_Uv(a)
# define DEBUG_Pv(a)
# define DEBUG_Lv(a)
#endif /* DEBUGGING */
#define DEBUG_SCOPE(where) \
DEBUG_l( \
Perl_deb(aTHX_ "%s scope %ld (savestack=%ld) at %s:%d\n", \
where, (long)PL_scopestack_ix, (long)PL_savestack_ix, \
__FILE__, __LINE__));
/* Keep the old croak based assert for those who want it, and as a fallback if
the platform is so heretically non-ANSI that it can't assert. */
#define Perl_assert(what) PERL_DEB2( \
((what) ? ((void) 0) : \
(Perl_croak_nocontext("Assertion %s failed: file \"" __FILE__ \
"\", line %d", STRINGIFY(what), __LINE__), \
(void) 0)), ((void)0))
/* assert() gets defined if DEBUGGING (and I_ASSERT).
* If no DEBUGGING, the <assert.h> has not been included. */
#ifndef assert
# define assert(what) Perl_assert(what)
#endif
#ifdef DEBUGGING
# define assert_(what) assert(what),
#else
# define assert_(what)
#endif
struct ufuncs {
I32 (*uf_val)(pTHX_ IV, SV*);
I32 (*uf_set)(pTHX_ IV, SV*);
IV uf_index;
};
/* In pre-5.7-Perls the PERL_MAGIC_uvar magic didn't get the thread context.
* XS code wanting to be backward compatible can do something
* like the following:
#ifndef PERL_MG_UFUNC
#define PERL_MG_UFUNC(name,ix,sv) I32 name(IV ix, SV *sv)
#endif
static PERL_MG_UFUNC(foo_get, index, val)
{
sv_setsv(val, ...);
return TRUE;
}
-- Doug MacEachern
*/
#ifndef PERL_MG_UFUNC
#define PERL_MG_UFUNC(name,ix,sv) I32 name(pTHX_ IV ix, SV *sv)
#endif
/* Fix these up for __STDC__ */
#ifndef DONT_DECLARE_STD
char *mktemp (char*);
#ifndef atof
double atof (const char*);
#endif
#endif
#ifndef STANDARD_C
/* All of these are in stdlib.h or time.h for ANSI C */
Time_t time();
struct tm *gmtime(), *localtime();
#if defined(OEMVS)
char *(strchr)(), *(strrchr)();
char *(strcpy)(), *(strcat)();
#else
char *strchr(), *strrchr();
char *strcpy(), *strcat();
#endif
#endif /* ! STANDARD_C */
#ifdef I_MATH
# include <math.h>
# ifdef __VMS
/* isfinite and others are here rather than in math.h as C99 stipulates */
# include <fp.h>
# endif
#else
START_EXTERN_C
double exp (double);
double log (double);
double log10 (double);
double sqrt (double);
double frexp (double,int*);
double ldexp (double,int);
double modf (double,double*);
double sin (double);
double cos (double);
double atan2 (double,double);
double pow (double,double);
END_EXTERN_C
#endif
#ifndef __cplusplus
# if !defined(WIN32) && !defined(VMS)
#ifndef crypt
char *crypt (const char*, const char*);
#endif
# endif /* !WIN32 */
# ifndef DONT_DECLARE_STD
# ifndef getenv
char *getenv (const char*);
# endif /* !getenv */
# if !defined(HAS_LSEEK_PROTO) && !defined(__hpux)
# ifdef _FILE_OFFSET_BITS
# if _FILE_OFFSET_BITS == 64
Off_t lseek (int,Off_t,int);
# endif
# endif
# endif
# endif /* !DONT_DECLARE_STD */
# ifndef WIN32
# ifndef getlogin
char *getlogin (void);
# endif
# endif /* !WIN32 */
#endif /* !__cplusplus */
/* Fixme on VMS. This needs to be a run-time, not build time options */
/* Also rename() is affected by this */
#ifdef UNLINK_ALL_VERSIONS /* Currently only makes sense for VMS */
#define UNLINK unlnk
I32 unlnk (pTHX_ const char*);
#else
#define UNLINK PerlLIO_unlink
#endif
/* some versions of glibc are missing the setresuid() proto */
#if defined(HAS_SETRESUID) && !defined(HAS_SETRESUID_PROTO)
int setresuid(uid_t ruid, uid_t euid, uid_t suid);
#endif
/* some versions of glibc are missing the setresgid() proto */
#if defined(HAS_SETRESGID) && !defined(HAS_SETRESGID_PROTO)
int setresgid(gid_t rgid, gid_t egid, gid_t sgid);
#endif
#ifndef HAS_SETREUID
# ifdef HAS_SETRESUID
# define setreuid(r,e) setresuid(r,e,(Uid_t)-1)
# define HAS_SETREUID
# endif
#endif
#ifndef HAS_SETREGID
# ifdef HAS_SETRESGID
# define setregid(r,e) setresgid(r,e,(Gid_t)-1)
# define HAS_SETREGID
# endif
#endif
/* Sighandler_t defined in iperlsys.h */
#ifdef HAS_SIGACTION
typedef struct sigaction Sigsave_t;
#else
typedef Sighandler_t Sigsave_t;
#endif
#define SCAN_DEF 0
#define SCAN_TR 1
#define SCAN_REPL 2
#ifdef DEBUGGING
# ifndef register
# define register
# endif
# define RUNOPS_DEFAULT Perl_runops_debug
#else
# define RUNOPS_DEFAULT Perl_runops_standard
#endif
#if defined(USE_PERLIO)
EXTERN_C void PerlIO_teardown(void);
# ifdef USE_ITHREADS
# define PERLIO_INIT MUTEX_INIT(&PL_perlio_mutex)
# define PERLIO_TERM \
STMT_START { \
PerlIO_teardown(); \
MUTEX_DESTROY(&PL_perlio_mutex);\
} STMT_END
# else
# define PERLIO_INIT
# define PERLIO_TERM PerlIO_teardown()
# endif
#else
# define PERLIO_INIT
# define PERLIO_TERM
#endif
#ifdef MYMALLOC
# ifdef MUTEX_INIT_CALLS_MALLOC
# define MALLOC_INIT \
STMT_START { \
PL_malloc_mutex = NULL; \
MUTEX_INIT(&PL_malloc_mutex); \
} STMT_END
# define MALLOC_TERM \
STMT_START { \
perl_mutex tmp = PL_malloc_mutex; \
PL_malloc_mutex = NULL; \
MUTEX_DESTROY(&tmp); \
} STMT_END
# else
# define MALLOC_INIT MUTEX_INIT(&PL_malloc_mutex)
# define MALLOC_TERM MUTEX_DESTROY(&PL_malloc_mutex)
# endif
#else
# define MALLOC_INIT
# define MALLOC_TERM
#endif
#if defined(PERL_IMPLICIT_CONTEXT)
struct perl_memory_debug_header;
struct perl_memory_debug_header {
tTHX interpreter;
# if defined(PERL_POISON) || defined(PERL_DEBUG_READONLY_COW)
MEM_SIZE size;
# endif
struct perl_memory_debug_header *prev;
struct perl_memory_debug_header *next;
# ifdef PERL_DEBUG_READONLY_COW
bool readonly;
# endif
};
#elif defined(PERL_DEBUG_READONLY_COW)
struct perl_memory_debug_header;
struct perl_memory_debug_header {
MEM_SIZE size;
};
#endif
#if defined (PERL_TRACK_MEMPOOL) || defined (PERL_DEBUG_READONLY_COW)
# define PERL_MEMORY_DEBUG_HEADER_SIZE \
(sizeof(struct perl_memory_debug_header) + \
(MEM_ALIGNBYTES - sizeof(struct perl_memory_debug_header) \
%MEM_ALIGNBYTES) % MEM_ALIGNBYTES)
#else
# define PERL_MEMORY_DEBUG_HEADER_SIZE 0
#endif
#ifdef PERL_TRACK_MEMPOOL
# ifdef PERL_DEBUG_READONLY_COW
# define INIT_TRACK_MEMPOOL(header, interp) \
STMT_START { \
(header).interpreter = (interp); \
(header).prev = (header).next = &(header); \
(header).readonly = 0; \
} STMT_END
# else
# define INIT_TRACK_MEMPOOL(header, interp) \
STMT_START { \
(header).interpreter = (interp); \
(header).prev = (header).next = &(header); \
} STMT_END
# endif
# else
# define INIT_TRACK_MEMPOOL(header, interp)
#endif
#ifdef I_MALLOCMALLOC
/* Needed for malloc_size(), malloc_good_size() on some systems */
# include <malloc/malloc.h>
#endif
#ifdef MYMALLOC
# define Perl_safesysmalloc_size(where) Perl_malloced_size(where)
#else
# if defined(HAS_MALLOC_SIZE) && !defined(PERL_DEBUG_READONLY_COW)
# ifdef PERL_TRACK_MEMPOOL
# define Perl_safesysmalloc_size(where) \
(malloc_size(((char *)(where)) - PERL_MEMORY_DEBUG_HEADER_SIZE) - PERL_MEMORY_DEBUG_HEADER_SIZE)
# else
# define Perl_safesysmalloc_size(where) malloc_size(where)
# endif
# endif
# ifdef HAS_MALLOC_GOOD_SIZE
# ifdef PERL_TRACK_MEMPOOL
# define Perl_malloc_good_size(how_much) \
(malloc_good_size((how_much) + PERL_MEMORY_DEBUG_HEADER_SIZE) - PERL_MEMORY_DEBUG_HEADER_SIZE)
# else
# define Perl_malloc_good_size(how_much) malloc_good_size(how_much)
# endif
# else
/* Having this as the identity operation makes some code simpler. */
# define Perl_malloc_good_size(how_much) (how_much)
# endif
#endif
typedef int (*runops_proc_t)(pTHX);
typedef void (*share_proc_t) (pTHX_ SV *sv);
typedef int (*thrhook_proc_t) (pTHX);
typedef OP* (*PPADDR_t[]) (pTHX);
typedef bool (*destroyable_proc_t) (pTHX_ SV *sv);
typedef void (*despatch_signals_proc_t) (pTHX);
#if defined(__DYNAMIC__) && defined(PERL_DARWIN) && defined(PERL_CORE)
# include <crt_externs.h> /* for the env array */
# define environ (*_NSGetEnviron())
#else
/* VMS and some other platforms don't use the environ array */
# ifdef USE_ENVIRON_ARRAY
# if !defined(DONT_DECLARE_STD) || \
(defined(__svr4__) && defined(__GNUC__) && defined(__sun)) || \
defined(__sgi)
extern char ** environ; /* environment variables supplied via exec */
# endif
# endif
#endif
#define PERL_PATCHLEVEL_H_IMPLICIT
#include "patchlevel.h"
#undef PERL_PATCHLEVEL_H_IMPLICIT
#define PERL_VERSION_STRING STRINGIFY(PERL_REVISION) "." \
STRINGIFY(PERL_VERSION) "." \
STRINGIFY(PERL_SUBVERSION)
#define PERL_API_VERSION_STRING STRINGIFY(PERL_API_REVISION) "." \
STRINGIFY(PERL_API_VERSION) "." \
STRINGIFY(PERL_API_SUBVERSION)
START_EXTERN_C
/* handy constants */
EXTCONST char PL_warn_uninit[]
INIT("Use of uninitialized value%s%s%s");
EXTCONST char PL_warn_uninit_sv[]
INIT("Use of uninitialized value%" SVf "%s%s");
EXTCONST char PL_warn_nosemi[]
INIT("Semicolon seems to be missing");
EXTCONST char PL_warn_reserved[]
INIT("Unquoted string \"%s\" may clash with future reserved word");
EXTCONST char PL_warn_nl[]
INIT("Unsuccessful %s on filename containing newline");
EXTCONST char PL_no_wrongref[]
INIT("Can't use %s ref as %s ref");
/* The core no longer needs this here. If you require the string constant,
please inline a copy into your own code. */
EXTCONST char PL_no_symref[] __attribute__deprecated__
INIT("Can't use string (\"%.32s\") as %s ref while \"strict refs\" in use");
EXTCONST char PL_no_symref_sv[]
INIT("Can't use string (\"%" SVf32 "\"%s) as %s ref while \"strict refs\" in use");
EXTCONST char PL_no_usym[]
INIT("Can't use an undefined value as %s reference");
EXTCONST char PL_no_aelem[]
INIT("Modification of non-creatable array value attempted, subscript %d");
EXTCONST char PL_no_helem_sv[]
INIT("Modification of non-creatable hash value attempted, subscript \"%" SVf "\"");
EXTCONST char PL_no_modify[]
INIT("Modification of a read-only value attempted");
EXTCONST char PL_no_mem[sizeof("Out of memory!\n")]
INIT("Out of memory!\n");
EXTCONST char PL_no_security[]
INIT("Insecure dependency in %s%s");
EXTCONST char PL_no_sock_func[]
INIT("Unsupported socket function \"%s\" called");
EXTCONST char PL_no_dir_func[]
INIT("Unsupported directory function \"%s\" called");
EXTCONST char PL_no_func[]
INIT("The %s function is unimplemented");
EXTCONST char PL_no_myglob[]
INIT("\"%s\" %se %s can't be in a package");
EXTCONST char PL_no_localize_ref[]
INIT("Can't localize through a reference");
EXTCONST char PL_memory_wrap[]
INIT("panic: memory wrap");
EXTCONST char PL_Yes[]
INIT("1");
EXTCONST char PL_No[]
INIT("");
EXTCONST char PL_hexdigit[]
INIT("0123456789abcdef0123456789ABCDEF");
/* This is constant on most architectures, a global on OS/2 */
#ifndef OS2
EXTCONST char PL_sh_path[]
INIT(SH_PATH); /* full path of shell */
#endif
#ifdef CSH
EXTCONST char PL_cshname[]
INIT(CSH);
# define PL_cshlen (sizeof(CSH "") - 1)
#endif
/* These are baked at compile time into any shared perl library.
In future releases this will allow us in main() to sanity test the
library we're linking against. */
EXTCONST U8 PL_revision
INIT(PERL_REVISION);
EXTCONST U8 PL_version
INIT(PERL_VERSION);
EXTCONST U8 PL_subversion
INIT(PERL_SUBVERSION);
EXTCONST char PL_uuemap[65]
INIT("`!\"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_");
/* a special string address whose value is "isa", but which perl knows
* to treat as if it were really "DOES" when printing the method name in
* the "Can't call method '%s'" error message */
EXTCONST char PL_isa_DOES[]
INIT("isa");
#ifdef DOINIT
EXTCONST char PL_uudmap[256] =
# ifdef PERL_MICRO
# include "uuudmap.h"
# else
# include "uudmap.h"
# endif
;
EXTCONST char PL_bitcount[256] =
# ifdef PERL_MICRO
# include "ubitcount.h"
#else
# include "bitcount.h"
# endif
;
EXTCONST char* const PL_sig_name[] = { SIG_NAME };
EXTCONST int PL_sig_num[] = { SIG_NUM };
#else
EXTCONST char PL_uudmap[256];
EXTCONST char PL_bitcount[256];
EXTCONST char* const PL_sig_name[];
EXTCONST int PL_sig_num[];
#endif
/* fast conversion and case folding tables. The folding tables complement the
* fold, so that 'a' maps to 'A' and 'A' maps to 'a', ignoring more complicated
* folds such as outside the range or to multiple characters. */
#ifdef DOINIT
#ifndef EBCDIC
/* The EBCDIC fold table depends on the code page, and hence is found in
* utfebcdic.h */
EXTCONST unsigned char PL_fold[] = {
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47,
48, 49, 50, 51, 52, 53, 54, 55,
56, 57, 58, 59, 60, 61, 62, 63,
64, 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', 91, 92, 93, 94, 95,
96, 'A', 'B', 'C', 'D', 'E', 'F', 'G',
'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O',
'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W',
'X', 'Y', 'Z', 123, 124, 125, 126, 127,
128, 129, 130, 131, 132, 133, 134, 135,
136, 137, 138, 139, 140, 141, 142, 143,
144, 145, 146, 147, 148, 149, 150, 151,
152, 153, 154, 155, 156, 157, 158, 159,
160, 161, 162, 163, 164, 165, 166, 167,
168, 169, 170, 171, 172, 173, 174, 175,
176, 177, 178, 179, 180, 181, 182, 183,
184, 185, 186, 187, 188, 189, 190, 191,
192, 193, 194, 195, 196, 197, 198, 199,
200, 201, 202, 203, 204, 205, 206, 207,
208, 209, 210, 211, 212, 213, 214, 215,
216, 217, 218, 219, 220, 221, 222, 223,
224, 225, 226, 227, 228, 229, 230, 231,
232, 233, 234, 235, 236, 237, 238, 239,
240, 241, 242, 243, 244, 245, 246, 247,
248, 249, 250, 251, 252, 253, 254, 255
};
EXTCONST unsigned char PL_fold_latin1[] = {
/* Full latin1 complement folding, except for three problematic code points:
* Micro sign (181 = 0xB5) and y with diearesis (255 = 0xFF) have their
* fold complements outside the Latin1 range, so can't match something
* that isn't in utf8.
* German lower case sharp s (223 = 0xDF) folds to two characters, 'ss',
* not one, so can't be represented in this table.
*
* All have to be specially handled */
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47,
48, 49, 50, 51, 52, 53, 54, 55,
56, 57, 58, 59, 60, 61, 62, 63,
64, 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', 91, 92, 93, 94, 95,
96, 'A', 'B', 'C', 'D', 'E', 'F', 'G',
'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O',
'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W',
'X', 'Y', 'Z', 123, 124, 125, 126, 127,
128, 129, 130, 131, 132, 133, 134, 135,
136, 137, 138, 139, 140, 141, 142, 143,
144, 145, 146, 147, 148, 149, 150, 151,
152, 153, 154, 155, 156, 157, 158, 159,
160, 161, 162, 163, 164, 165, 166, 167,
168, 169, 170, 171, 172, 173, 174, 175,
176, 177, 178, 179, 180, 181 /*micro */, 182, 183,
184, 185, 186, 187, 188, 189, 190, 191,
192+32, 193+32, 194+32, 195+32, 196+32, 197+32, 198+32, 199+32,
200+32, 201+32, 202+32, 203+32, 204+32, 205+32, 206+32, 207+32,
208+32, 209+32, 210+32, 211+32, 212+32, 213+32, 214+32, 215,
216+32, 217+32, 218+32, 219+32, 220+32, 221+32, 222+32, 223 /* ss */,
224-32, 225-32, 226-32, 227-32, 228-32, 229-32, 230-32, 231-32,
232-32, 233-32, 234-32, 235-32, 236-32, 237-32, 238-32, 239-32,
240-32, 241-32, 242-32, 243-32, 244-32, 245-32, 246-32, 247,
248-32, 249-32, 250-32, 251-32, 252-32, 253-32, 254-32,
255 /* y with diaeresis */
};
/* If these tables are accessed through ebcdic, the access will be converted to
* latin1 first */
EXTCONST unsigned char PL_latin1_lc[] = { /* lowercasing */
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47,
48, 49, 50, 51, 52, 53, 54, 55,
56, 57, 58, 59, 60, 61, 62, 63,
64, 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', 91, 92, 93, 94, 95,
96, 97, 98, 99, 100, 101, 102, 103,
104, 105, 106, 107, 108, 109, 110, 111,
112, 113, 114, 115, 116, 117, 118, 119,
120, 121, 122, 123, 124, 125, 126, 127,
128, 129, 130, 131, 132, 133, 134, 135,
136, 137, 138, 139, 140, 141, 142, 143,
144, 145, 146, 147, 148, 149, 150, 151,
152, 153, 154, 155, 156, 157, 158, 159,
160, 161, 162, 163, 164, 165, 166, 167,
168, 169, 170, 171, 172, 173, 174, 175,
176, 177, 178, 179, 180, 181, 182, 183,
184, 185, 186, 187, 188, 189, 190, 191,
192+32, 193+32, 194+32, 195+32, 196+32, 197+32, 198+32, 199+32,
200+32, 201+32, 202+32, 203+32, 204+32, 205+32, 206+32, 207+32,
208+32, 209+32, 210+32, 211+32, 212+32, 213+32, 214+32, 215,
216+32, 217+32, 218+32, 219+32, 220+32, 221+32, 222+32, 223,
224, 225, 226, 227, 228, 229, 230, 231,
232, 233, 234, 235, 236, 237, 238, 239,
240, 241, 242, 243, 244, 245, 246, 247,
248, 249, 250, 251, 252, 253, 254, 255
};
/* upper and title case of latin1 characters, modified so that the three tricky
* ones are mapped to 255 (which is one of the three) */
EXTCONST unsigned char PL_mod_latin1_uc[] = {
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47,
48, 49, 50, 51, 52, 53, 54, 55,
56, 57, 58, 59, 60, 61, 62, 63,
64, 65, 66, 67, 68, 69, 70, 71,
72, 73, 74, 75, 76, 77, 78, 79,
80, 81, 82, 83, 84, 85, 86, 87,
88, 89, 90, 91, 92, 93, 94, 95,
96, 'A', 'B', 'C', 'D', 'E', 'F', 'G',
'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O',
'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W',
'X', 'Y', 'Z', 123, 124, 125, 126, 127,
128, 129, 130, 131, 132, 133, 134, 135,
136, 137, 138, 139, 140, 141, 142, 143,
144, 145, 146, 147, 148, 149, 150, 151,
152, 153, 154, 155, 156, 157, 158, 159,
160, 161, 162, 163, 164, 165, 166, 167,
168, 169, 170, 171, 172, 173, 174, 175,
176, 177, 178, 179, 180, 255 /*micro*/, 182, 183,
184, 185, 186, 187, 188, 189, 190, 191,
192, 193, 194, 195, 196, 197, 198, 199,
200, 201, 202, 203, 204, 205, 206, 207,
208, 209, 210, 211, 212, 213, 214, 215,
216, 217, 218, 219, 220, 221, 222,
#if UNICODE_MAJOR_VERSION > 2 \
|| (UNICODE_MAJOR_VERSION == 2 && UNICODE_DOT_VERSION >= 1 \
&& UNICODE_DOT_DOT_VERSION >= 8)
255 /*sharp s*/,
#else /* uc() is itself in early unicode */
223,
#endif
224-32, 225-32, 226-32, 227-32, 228-32, 229-32, 230-32, 231-32,
232-32, 233-32, 234-32, 235-32, 236-32, 237-32, 238-32, 239-32,
240-32, 241-32, 242-32, 243-32, 244-32, 245-32, 246-32, 247,
248-32, 249-32, 250-32, 251-32, 252-32, 253-32, 254-32, 255
};
#endif /* !EBCDIC, but still in DOINIT */
#else /* ! DOINIT */
# ifndef EBCDIC
EXTCONST unsigned char PL_fold[];
EXTCONST unsigned char PL_fold_latin1[];
EXTCONST unsigned char PL_mod_latin1_uc[];
EXTCONST unsigned char PL_latin1_lc[];
# endif
#endif
#ifndef PERL_GLOBAL_STRUCT /* or perlvars.h */
#ifdef DOINIT
EXT unsigned char PL_fold_locale[] = { /* Unfortunately not EXTCONST. */
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47,
48, 49, 50, 51, 52, 53, 54, 55,
56, 57, 58, 59, 60, 61, 62, 63,
64, 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', 91, 92, 93, 94, 95,
96, 'A', 'B', 'C', 'D', 'E', 'F', 'G',
'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O',
'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W',
'X', 'Y', 'Z', 123, 124, 125, 126, 127,
128, 129, 130, 131, 132, 133, 134, 135,
136, 137, 138, 139, 140, 141, 142, 143,
144, 145, 146, 147, 148, 149, 150, 151,
152, 153, 154, 155, 156, 157, 158, 159,
160, 161, 162, 163, 164, 165, 166, 167,
168, 169, 170, 171, 172, 173, 174, 175,
176, 177, 178, 179, 180, 181, 182, 183,
184, 185, 186, 187, 188, 189, 190, 191,
192, 193, 194, 195, 196, 197, 198, 199,
200, 201, 202, 203, 204, 205, 206, 207,
208, 209, 210, 211, 212, 213, 214, 215,
216, 217, 218, 219, 220, 221, 222, 223,
224, 225, 226, 227, 228, 229, 230, 231,
232, 233, 234, 235, 236, 237, 238, 239,
240, 241, 242, 243, 244, 245, 246, 247,
248, 249, 250, 251, 252, 253, 254, 255
};
#else
EXT unsigned char PL_fold_locale[]; /* Unfortunately not EXTCONST. */
#endif
#endif /* !PERL_GLOBAL_STRUCT */
#ifdef DOINIT
#ifdef EBCDIC
EXTCONST unsigned char PL_freq[] = {/* EBCDIC frequencies for mixed English/C */
1, 2, 84, 151, 154, 155, 156, 157,
165, 246, 250, 3, 158, 7, 18, 29,
40, 51, 62, 73, 85, 96, 107, 118,
129, 140, 147, 148, 149, 150, 152, 153,
255, 6, 8, 9, 10, 11, 12, 13,
14, 15, 24, 25, 26, 27, 28, 226,
29, 30, 31, 32, 33, 43, 44, 45,
46, 47, 48, 49, 50, 76, 77, 78,
79, 80, 81, 82, 83, 84, 85, 86,
87, 94, 95, 234, 181, 233, 187, 190,
180, 96, 97, 98, 99, 100, 101, 102,
104, 112, 182, 174, 236, 232, 229, 103,
228, 226, 114, 115, 116, 117, 118, 119,
120, 121, 122, 235, 176, 230, 194, 162,
130, 131, 132, 133, 134, 135, 136, 137,
138, 139, 201, 205, 163, 217, 220, 224,
5, 248, 227, 244, 242, 255, 241, 231,
240, 253, 16, 197, 19, 20, 21, 187,
23, 169, 210, 245, 237, 249, 247, 239,
168, 252, 34, 196, 36, 37, 38, 39,
41, 42, 251, 254, 238, 223, 221, 213,
225, 177, 52, 53, 54, 55, 56, 57,
58, 59, 60, 61, 63, 64, 65, 66,
67, 68, 69, 70, 71, 72, 74, 75,
205, 208, 186, 202, 200, 218, 198, 179,
178, 214, 88, 89, 90, 91, 92, 93,
217, 166, 170, 207, 199, 209, 206, 204,
160, 212, 105, 106, 108, 109, 110, 111,
203, 113, 216, 215, 192, 175, 193, 243,
172, 161, 123, 124, 125, 126, 127, 128,
222, 219, 211, 195, 188, 193, 185, 184,
191, 183, 141, 142, 143, 144, 145, 146
};
#else /* ascii rather than ebcdic */
EXTCONST unsigned char PL_freq[] = { /* letter frequencies for mixed English/C */
1, 2, 84, 151, 154, 155, 156, 157,
165, 246, 250, 3, 158, 7, 18, 29,
40, 51, 62, 73, 85, 96, 107, 118,
129, 140, 147, 148, 149, 150, 152, 153,
255, 182, 224, 205, 174, 176, 180, 217,
233, 232, 236, 187, 235, 228, 234, 226,
222, 219, 211, 195, 188, 193, 185, 184,
191, 183, 201, 229, 181, 220, 194, 162,
163, 208, 186, 202, 200, 218, 198, 179,
178, 214, 166, 170, 207, 199, 209, 206,
204, 160, 212, 216, 215, 192, 175, 173,
243, 172, 161, 190, 203, 189, 164, 230,
167, 248, 227, 244, 242, 255, 241, 231,
240, 253, 169, 210, 245, 237, 249, 247,
239, 168, 252, 251, 254, 238, 223, 221,
213, 225, 177, 197, 171, 196, 159, 4,
5, 6, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 19, 20, 21, 22,
23, 24, 25, 26, 27, 28, 30, 31,
32, 33, 34, 35, 36, 37, 38, 39,
41, 42, 43, 44, 45, 46, 47, 48,
49, 50, 52, 53, 54, 55, 56, 57,
58, 59, 60, 61, 63, 64, 65, 66,
67, 68, 69, 70, 71, 72, 74, 75,
76, 77, 78, 79, 80, 81, 82, 83,
86, 87, 88, 89, 90, 91, 92, 93,
94, 95, 97, 98, 99, 100, 101, 102,
103, 104, 105, 106, 108, 109, 110, 111,
112, 113, 114, 115, 116, 117, 119, 120,
121, 122, 123, 124, 125, 126, 127, 128,
130, 131, 132, 133, 134, 135, 136, 137,
138, 139, 141, 142, 143, 144, 145, 146
};
#endif
#else
EXTCONST unsigned char PL_freq[];
#endif
/* Although only used for debugging, these constants must be available in
* non-debugging builds too, since they're used in ext/re/re_exec.c,
* which has DEBUGGING enabled always */
#ifdef DOINIT
EXTCONST char* const PL_block_type[] = {
"NULL",
"WHEN",
"BLOCK",
"GIVEN",
"LOOP_ARY",
"LOOP_LAZYSV",
"LOOP_LAZYIV",
"LOOP_LIST",
"LOOP_PLAIN",
"SUB",
"FORMAT",
"EVAL",
"SUBST"
};
#else
EXTCONST char* PL_block_type[];
#endif
/* These are all the compile time options that affect binary compatibility.
Other compile time options that are binary compatible are in perl.c
(in S_Internals_V()). Both are combined for the output of perl -V
However, this string will be embedded in any shared perl library, which will
allow us add a comparison check in perlmain.c in the near future. */
#ifdef DOINIT
EXTCONST char PL_bincompat_options[] =
# ifdef DEBUG_LEAKING_SCALARS
" DEBUG_LEAKING_SCALARS"
# endif
# ifdef DEBUG_LEAKING_SCALARS_FORK_DUMP
" DEBUG_LEAKING_SCALARS_FORK_DUMP"
# endif
# ifdef FCRYPT
" FCRYPT"
# endif
# ifdef HAS_TIMES
" HAS_TIMES"
# endif
# ifdef HAVE_INTERP_INTERN
" HAVE_INTERP_INTERN"
# endif
# ifdef MULTIPLICITY
" MULTIPLICITY"
# endif
# ifdef MYMALLOC
" MYMALLOC"
# endif
# ifdef PERLIO_LAYERS
" PERLIO_LAYERS"
# endif
# ifdef PERL_DEBUG_READONLY_COW
" PERL_DEBUG_READONLY_COW"
# endif
# ifdef PERL_DEBUG_READONLY_OPS
" PERL_DEBUG_READONLY_OPS"
# endif
# ifdef PERL_GLOBAL_STRUCT
" PERL_GLOBAL_STRUCT"
# endif
# ifdef PERL_GLOBAL_STRUCT_PRIVATE
" PERL_GLOBAL_STRUCT_PRIVATE"
# endif
# ifdef PERL_IMPLICIT_CONTEXT
" PERL_IMPLICIT_CONTEXT"
# endif
# ifdef PERL_IMPLICIT_SYS
" PERL_IMPLICIT_SYS"
# endif
# ifdef PERL_MICRO
" PERL_MICRO"
# endif
# ifdef PERL_NEED_APPCTX
" PERL_NEED_APPCTX"
# endif
# ifdef PERL_NEED_TIMESBASE
" PERL_NEED_TIMESBASE"
# endif
# ifdef PERL_POISON
" PERL_POISON"
# endif
# ifdef PERL_SAWAMPERSAND
" PERL_SAWAMPERSAND"
# endif
# ifdef PERL_TRACK_MEMPOOL
" PERL_TRACK_MEMPOOL"
# endif
# ifdef PERL_USES_PL_PIDSTATUS
" PERL_USES_PL_PIDSTATUS"
# endif
# ifdef USE_64_BIT_ALL
" USE_64_BIT_ALL"
# endif
# ifdef USE_64_BIT_INT
" USE_64_BIT_INT"
# endif
# ifdef USE_IEEE
" USE_IEEE"
# endif
# ifdef USE_ITHREADS
" USE_ITHREADS"
# endif
# ifdef USE_LARGE_FILES
" USE_LARGE_FILES"
# endif
# ifdef USE_LOCALE_COLLATE
" USE_LOCALE_COLLATE"
# endif
# ifdef USE_LOCALE_NUMERIC
" USE_LOCALE_NUMERIC"
# endif
# ifdef USE_LOCALE_TIME
" USE_LOCALE_TIME"
# endif
# ifdef USE_LONG_DOUBLE
" USE_LONG_DOUBLE"
# endif
# ifdef USE_PERLIO
" USE_PERLIO"
# endif
# ifdef USE_QUADMATH
" USE_QUADMATH"
# endif
# ifdef USE_REENTRANT_API
" USE_REENTRANT_API"
# endif
# ifdef USE_SOCKS
" USE_SOCKS"
# endif
# ifdef VMS_DO_SOCKETS
" VMS_DO_SOCKETS"
# endif
# ifdef VMS_SHORTEN_LONG_SYMBOLS
" VMS_SHORTEN_LONG_SYMBOLS"
# endif
# ifdef VMS_WE_ARE_CASE_SENSITIVE
" VMS_SYMBOL_CASE_AS_IS"
# endif
"";
#else
EXTCONST char PL_bincompat_options[];
#endif
#ifndef PERL_SET_PHASE
# define PERL_SET_PHASE(new_phase) \
PERL_DTRACE_PROBE_PHASE(new_phase); \
PL_phase = new_phase;
#endif
/* The interpreter phases. If these ever change, PL_phase_names right below will
* need to be updated accordingly. */
enum perl_phase {
PERL_PHASE_CONSTRUCT = 0,
PERL_PHASE_START = 1,
PERL_PHASE_CHECK = 2,
PERL_PHASE_INIT = 3,
PERL_PHASE_RUN = 4,
PERL_PHASE_END = 5,
PERL_PHASE_DESTRUCT = 6
};
#ifdef DOINIT
EXTCONST char *const PL_phase_names[] = {
"CONSTRUCT",
"START",
"CHECK",
"INIT",
"RUN",
"END",
"DESTRUCT"
};
#else
EXTCONST char *const PL_phase_names[];
#endif
#ifndef PERL_CORE
/* Do not use this macro. It only exists for extensions that rely on PL_dirty
* instead of using the newer PL_phase, which provides everything PL_dirty
* provided, and more. */
# define PL_dirty cBOOL(PL_phase == PERL_PHASE_DESTRUCT)
# define PL_amagic_generation PL_na
# define PL_encoding ((SV *)NULL)
#endif /* !PERL_CORE */
#define PL_hints PL_compiling.cop_hints
#define PL_maxo MAXO
END_EXTERN_C
/*****************************************************************************/
/* This lexer/parser stuff is currently global since yacc is hard to reenter */
/*****************************************************************************/
/* XXX This needs to be revisited, since BEGIN makes yacc re-enter... */
#ifdef __Lynx__
/* LynxOS defines these in scsi.h which is included via ioctl.h */
#ifdef FORMAT
#undef FORMAT
#endif
#ifdef SPACE
#undef SPACE
#endif
#endif
#define LEX_NOTPARSING 11 /* borrowed from toke.c */
typedef enum {
XOPERATOR,
XTERM,
XREF,
XSTATE,
XBLOCK,
XATTRBLOCK,
XATTRTERM,
XTERMBLOCK,
XBLOCKTERM,
XPOSTDEREF,
XTERMORDORDOR /* evil hack */
/* update exp_name[] in toke.c if adding to this enum */
} expectation;
#define KEY_sigvar 0xFFFF /* fake keyword representing a signature var */
/* Hints are now stored in a dedicated U32, so the bottom 8 bits are no longer
special and there is no need for HINT_PRIVATE_MASK for COPs
However, bitops store HINT_INTEGER in their op_private.
NOTE: The typical module using these has the bit value hard-coded, so don't
blindly change the values of these.
If we run out of bits, the 2 locale ones could be combined. The PARTIAL one
is for "use locale 'FOO'" which excludes some categories. It requires going
to %^H to find out which are in and which are out. This could be extended
for the normal case of a plain HINT_LOCALE, so that %^H would be used for
any locale form. */
#define HINT_INTEGER 0x00000001 /* integer pragma */
#define HINT_STRICT_REFS 0x00000002 /* strict pragma */
#define HINT_LOCALE 0x00000004 /* locale pragma */
#define HINT_BYTES 0x00000008 /* bytes pragma */
#define HINT_LOCALE_PARTIAL 0x00000010 /* locale, but a subset of categories */
#define HINT_EXPLICIT_STRICT_REFS 0x00000020 /* strict.pm */
#define HINT_EXPLICIT_STRICT_SUBS 0x00000040 /* strict.pm */
#define HINT_EXPLICIT_STRICT_VARS 0x00000080 /* strict.pm */
#define HINT_BLOCK_SCOPE 0x00000100
#define HINT_STRICT_SUBS 0x00000200 /* strict pragma */
#define HINT_STRICT_VARS 0x00000400 /* strict pragma */
#define HINT_UNI_8_BIT 0x00000800 /* unicode_strings feature */
/* The HINT_NEW_* constants are used by the overload pragma */
#define HINT_NEW_INTEGER 0x00001000
#define HINT_NEW_FLOAT 0x00002000
#define HINT_NEW_BINARY 0x00004000
#define HINT_NEW_STRING 0x00008000
#define HINT_NEW_RE 0x00010000
#define HINT_LOCALIZE_HH 0x00020000 /* %^H needs to be copied */
#define HINT_LEXICAL_IO_IN 0x00040000 /* ${^OPEN} is set for input */
#define HINT_LEXICAL_IO_OUT 0x00080000 /* ${^OPEN} is set for output */
#define HINT_RE_TAINT 0x00100000 /* re pragma */
#define HINT_RE_EVAL 0x00200000 /* re pragma */
#define HINT_FILETEST_ACCESS 0x00400000 /* filetest pragma */
#define HINT_UTF8 0x00800000 /* utf8 pragma */
#define HINT_NO_AMAGIC 0x01000000 /* overloading pragma */
#define HINT_RE_FLAGS 0x02000000 /* re '/xism' pragma */
#define HINT_FEATURE_MASK 0x1c000000 /* 3 bits for feature bundles */
/* Note: Used for HINT_M_VMSISH_*,
currently defined by vms/vmsish.h:
0x40000000
0x80000000
*/
/* The following are stored in $^H{sort}, not in PL_hints */
#define HINT_SORT_SORT_BITS 0x000000FF /* allow 256 different ones */
#define HINT_SORT_QUICKSORT 0x00000001
#define HINT_SORT_MERGESORT 0x00000002
#define HINT_SORT_STABLE 0x00000100 /* sort styles (currently one) */
/* flags for PL_sawampersand */
#define SAWAMPERSAND_LEFT 1 /* saw $` */
#define SAWAMPERSAND_MIDDLE 2 /* saw $& */
#define SAWAMPERSAND_RIGHT 4 /* saw $' */
#ifndef PERL_SAWAMPERSAND
# define PL_sawampersand \
(SAWAMPERSAND_LEFT|SAWAMPERSAND_MIDDLE|SAWAMPERSAND_RIGHT)
#endif
/* Used for debugvar magic */
#define DBVARMG_SINGLE 0
#define DBVARMG_TRACE 1
#define DBVARMG_SIGNAL 2
#define DBVARMG_COUNT 3
#define PL_DBsingle_iv (PL_DBcontrol[DBVARMG_SINGLE])
#define PL_DBtrace_iv (PL_DBcontrol[DBVARMG_TRACE])
#define PL_DBsignal_iv (PL_DBcontrol[DBVARMG_SIGNAL])
/* Various states of the input record separator SV (rs) */
#define RsSNARF(sv) (! SvOK(sv))
#define RsSIMPLE(sv) (SvOK(sv) && (! SvPOK(sv) || SvCUR(sv)))
#define RsPARA(sv) (SvPOK(sv) && ! SvCUR(sv))
#define RsRECORD(sv) (SvROK(sv) && (SvIV(SvRV(sv)) > 0))
/* A struct for keeping various DEBUGGING related stuff,
* neatly packed. Currently only scratch variables for
* constructing debug output are included. Needed always,
* not just when DEBUGGING, though, because of the re extension. c*/
struct perl_debug_pad {
SV pad[3];
};
#define PERL_DEBUG_PAD(i) &(PL_debug_pad.pad[i])
#define PERL_DEBUG_PAD_ZERO(i) (SvPVX(PERL_DEBUG_PAD(i))[0] = 0, \
(((XPV*) SvANY(PERL_DEBUG_PAD(i)))->xpv_cur = 0), \
PERL_DEBUG_PAD(i))
/* Enable variables which are pointers to functions */
typedef void (*peep_t)(pTHX_ OP* o);
typedef regexp* (*regcomp_t) (pTHX_ char* exp, char* xend, PMOP* pm);
typedef I32 (*regexec_t) (pTHX_ regexp* prog, char* stringarg,
char* strend, char* strbeg, I32 minend,
SV* screamer, void* data, U32 flags);
typedef char* (*re_intuit_start_t) (pTHX_ regexp *prog, SV *sv,
char *strpos, char *strend,
U32 flags,
re_scream_pos_data *d);
typedef SV* (*re_intuit_string_t) (pTHX_ regexp *prog);
typedef void (*regfree_t) (pTHX_ struct regexp* r);
typedef regexp* (*regdupe_t) (pTHX_ const regexp* r, CLONE_PARAMS *param);
typedef I32 (*re_fold_t)(const char *, char const *, I32);
typedef void (*DESTRUCTORFUNC_NOCONTEXT_t) (void*);
typedef void (*DESTRUCTORFUNC_t) (pTHX_ void*);
typedef void (*SVFUNC_t) (pTHX_ SV* const);
typedef I32 (*SVCOMPARE_t) (pTHX_ SV* const, SV* const);
typedef void (*XSINIT_t) (pTHX);
typedef void (*ATEXIT_t) (pTHX_ void*);
typedef void (*XSUBADDR_t) (pTHX_ CV *);
typedef OP* (*Perl_ppaddr_t)(pTHX);
typedef OP* (*Perl_check_t) (pTHX_ OP*);
typedef void(*Perl_ophook_t)(pTHX_ OP*);
typedef int (*Perl_keyword_plugin_t)(pTHX_ char*, STRLEN, OP**);
typedef void(*Perl_cpeep_t)(pTHX_ OP *, OP *);
typedef void(*globhook_t)(pTHX);
#define KEYWORD_PLUGIN_DECLINE 0
#define KEYWORD_PLUGIN_STMT 1
#define KEYWORD_PLUGIN_EXPR 2
/* Interpreter exitlist entry */
typedef struct exitlistentry {
void (*fn) (pTHX_ void*);
void *ptr;
} PerlExitListEntry;
/* if you only have signal() and it resets on each signal, FAKE_PERSISTENT_SIGNAL_HANDLERS fixes */
/* These have to be before perlvars.h */
#if !defined(HAS_SIGACTION) && defined(VMS)
# define FAKE_PERSISTENT_SIGNAL_HANDLERS
#endif
/* if we're doing kill() with sys$sigprc on VMS, FAKE_DEFAULT_SIGNAL_HANDLERS */
#if defined(KILL_BY_SIGPRC)
# define FAKE_DEFAULT_SIGNAL_HANDLERS
#endif
#if !defined(MULTIPLICITY)
struct interpreter {
char broiled;
};
#else
/* If we have multiple interpreters define a struct
holding variables which must be per-interpreter
If we don't have threads anything that would have
be per-thread is per-interpreter.
*/
/* Set up PERLVAR macros for populating structs */
# define PERLVAR(prefix,var,type) type prefix##var;
/* 'var' is an array of length 'n' */
# define PERLVARA(prefix,var,n,type) type prefix##var[n];
/* initialize 'var' to init' */
# define PERLVARI(prefix,var,type,init) type prefix##var;
/* like PERLVARI, but make 'var' a const */
# define PERLVARIC(prefix,var,type,init) type prefix##var;
struct interpreter {
# include "intrpvar.h"
};
EXTCONST U16 PL_interp_size
INIT(sizeof(struct interpreter));
# define PERL_INTERPRETER_SIZE_UPTO_MEMBER(member) \
STRUCT_OFFSET(struct interpreter, member) + \
sizeof(((struct interpreter*)0)->member)
/* This will be useful for subsequent releases, because this has to be the
same in your libperl as in main(), else you have a mismatch and must abort.
*/
EXTCONST U16 PL_interp_size_5_18_0
INIT(PERL_INTERPRETER_SIZE_UPTO_MEMBER(PERL_LAST_5_18_0_INTERP_MEMBER));
# ifdef PERL_GLOBAL_STRUCT
/* MULTIPLICITY is automatically defined when PERL_GLOBAL_STRUCT is defined,
hence it's safe and sane to nest this within #ifdef MULTIPLICITY */
struct perl_vars {
# include "perlvars.h"
};
EXTCONST U16 PL_global_struct_size
INIT(sizeof(struct perl_vars));
# ifdef PERL_CORE
# ifndef PERL_GLOBAL_STRUCT_PRIVATE
EXT struct perl_vars PL_Vars;
EXT struct perl_vars *PL_VarsPtr INIT(&PL_Vars);
# undef PERL_GET_VARS
# define PERL_GET_VARS() PL_VarsPtr
# endif /* !PERL_GLOBAL_STRUCT_PRIVATE */
# else /* PERL_CORE */
# if !defined(__GNUC__) || !defined(WIN32)
EXT
# endif /* WIN32 */
struct perl_vars *PL_VarsPtr;
# define PL_Vars (*((PL_VarsPtr) \
? PL_VarsPtr : (PL_VarsPtr = Perl_GetVars(aTHX))))
# endif /* PERL_CORE */
# endif /* PERL_GLOBAL_STRUCT */
/* Done with PERLVAR macros for now ... */
# undef PERLVAR
# undef PERLVARA
# undef PERLVARI
# undef PERLVARIC
#endif /* MULTIPLICITY */
struct tempsym; /* defined in pp_pack.c */
#include "thread.h"
#include "pp.h"
#undef PERL_CKDEF
#undef PERL_PPDEF
#define PERL_CKDEF(s) PERL_CALLCONV OP *s (pTHX_ OP *o);
#define PERL_PPDEF(s) PERL_CALLCONV OP *s (pTHX);
#ifdef MYMALLOC
# include "malloc_ctl.h"
#endif
/*
* This provides a layer of functions and macros to ensure extensions will
* get to use the same RTL functions as the core.
*/
#if defined(WIN32)
# include "win32iop.h"
#endif
#include "proto.h"
/* this has structure inits, so it cannot be included before here */
#include "opcode.h"
/* The following must follow proto.h as #defines mess up syntax */
#if !defined(PERL_FOR_X2P)
# include "embedvar.h"
#endif
/* Now include all the 'global' variables
* If we don't have threads or multiple interpreters
* these include variables that would have been their struct-s
*/
#define PERLVAR(prefix,var,type) EXT type PL_##var;
#define PERLVARA(prefix,var,n,type) EXT type PL_##var[n];
#define PERLVARI(prefix,var,type,init) EXT type PL_##var INIT(init);
#define PERLVARIC(prefix,var,type,init) EXTCONST type PL_##var INIT(init);
#if !defined(MULTIPLICITY)
START_EXTERN_C
# include "intrpvar.h"
END_EXTERN_C
#endif
#ifdef PERL_CORE
/* All core uses now exterminated. Ensure no zombies can return: */
# undef PL_na
#endif
/* Now all the config stuff is setup we can include embed.h
In particular, need the relevant *ish file included already, as it may
define HAVE_INTERP_INTERN */
#include "embed.h"
#ifndef PERL_GLOBAL_STRUCT
START_EXTERN_C
# include "perlvars.h"
END_EXTERN_C
#endif
#undef PERLVAR
#undef PERLVARA
#undef PERLVARI
#undef PERLVARIC
#if !defined(MULTIPLICITY)
/* Set up PERLVAR macros for populating structs */
# define PERLVAR(prefix,var,type) type prefix##var;
/* 'var' is an array of length 'n' */
# define PERLVARA(prefix,var,n,type) type prefix##var[n];
/* initialize 'var' to init' */
# define PERLVARI(prefix,var,type,init) type prefix##var;
/* like PERLVARI, but make 'var' a const */
# define PERLVARIC(prefix,var,type,init) type prefix##var;
/* this is never instantiated, is it just used for sizeof(struct PerlHandShakeInterpreter) */
struct PerlHandShakeInterpreter {
# include "intrpvar.h"
};
# undef PERLVAR
# undef PERLVARA
# undef PERLVARI
# undef PERLVARIC
#endif
START_EXTERN_C
/* dummy variables that hold pointers to both runops functions, thus forcing
* them *both* to get linked in (useful for Peek.xs, debugging etc) */
EXTCONST runops_proc_t PL_runops_std
INIT(Perl_runops_standard);
EXTCONST runops_proc_t PL_runops_dbg
INIT(Perl_runops_debug);
#define EXT_MGVTBL EXTCONST MGVTBL
#define PERL_MAGIC_READONLY_ACCEPTABLE 0x40
#define PERL_MAGIC_VALUE_MAGIC 0x80
#define PERL_MAGIC_VTABLE_MASK 0x3F
#define PERL_MAGIC_TYPE_READONLY_ACCEPTABLE(t) \
(PL_magic_data[(U8)(t)] & PERL_MAGIC_READONLY_ACCEPTABLE)
#define PERL_MAGIC_TYPE_IS_VALUE_MAGIC(t) \
(PL_magic_data[(U8)(t)] & PERL_MAGIC_VALUE_MAGIC)
#include "mg_vtable.h"
#ifdef DOINIT
EXTCONST U8 PL_magic_data[256] =
# ifdef PERL_MICRO
# include "umg_data.h"
# else
# include "mg_data.h"
# endif
;
#else
EXTCONST U8 PL_magic_data[256];
#endif
#ifdef DOINIT
/* NL IV NV PV INV PI PN MG RX GV LV AV HV CV FM IO */
EXTCONST bool
PL_valid_types_IVX[] = { 0, 1, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0 };
EXTCONST bool
PL_valid_types_NVX[] = { 0, 0, 1, 0, 0, 0, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0 };
EXTCONST bool
PL_valid_types_PVX[] = { 0, 0, 0, 1, 1, 1, 1, 1, 0, 1, 1, 0, 0, 1, 1, 1 };
EXTCONST bool
PL_valid_types_RV[] = { 0, 1, 0, 1, 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1 };
EXTCONST bool
PL_valid_types_IV_set[] = { 0, 1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1 };
EXTCONST bool
PL_valid_types_NV_set[] = { 0, 0, 1, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 };
#else
EXTCONST bool PL_valid_types_IVX[];
EXTCONST bool PL_valid_types_NVX[];
EXTCONST bool PL_valid_types_PVX[];
EXTCONST bool PL_valid_types_RV[];
EXTCONST bool PL_valid_types_IV_set[];
EXTCONST bool PL_valid_types_NV_set[];
#endif
/* In C99 we could use designated (named field) union initializers.
* In C89 we need to initialize the member declared first.
* In C++ we need extern C initializers.
*
* With the U8_NV version you will want to have inner braces,
* while with the NV_U8 use just the NV. */
#ifdef __cplusplus
#define INFNAN_U8_NV_DECL EXTERN_C const union { U8 u8[NVSIZE]; NV nv; }
#define INFNAN_NV_U8_DECL EXTERN_C const union { NV nv; U8 u8[NVSIZE]; }
#else
#define INFNAN_U8_NV_DECL EXTCONST union { U8 u8[NVSIZE]; NV nv; }
#define INFNAN_NV_U8_DECL EXTCONST union { NV nv; U8 u8[NVSIZE]; }
#endif
/* if these never got defined, they need defaults */
#ifndef PERL_SET_CONTEXT
# define PERL_SET_CONTEXT(i) PERL_SET_INTERP(i)
#endif
#ifndef PERL_GET_CONTEXT
# define PERL_GET_CONTEXT PERL_GET_INTERP
#endif
#ifndef PERL_GET_THX
# define PERL_GET_THX ((void*)NULL)
#endif
#ifndef PERL_SET_THX
# define PERL_SET_THX(t) NOOP
#endif
#ifndef PERL_NO_INLINE_FUNCTIONS
/* Static inline funcs that depend on includes and declarations above.
Some of these reference functions in the perl object files, and some
compilers aren't smart enough to eliminate unused static inline
functions, so including this file in source code can cause link errors
even if the source code uses none of the functions. Hence including these
can be be suppressed by setting PERL_NO_INLINE_FUNCTIONS. Doing this will
(obviously) result in unworkable XS code, but allows simple probing code
to continue to work, because it permits tests to include the perl headers
for definitions without creating a link dependency on the perl library
(which may not exist yet).
*/
# include "inline.h"
#endif
#include "overload.h"
END_EXTERN_C
struct am_table {
U8 flags;
U8 fallback;
U16 spare;
U32 was_ok_sub;
CV* table[NofAMmeth];
};
struct am_table_short {
U8 flags;
U8 fallback;
U16 spare;
U32 was_ok_sub;
};
typedef struct am_table AMT;
typedef struct am_table_short AMTS;
#define AMGfallNEVER 1
#define AMGfallNO 2
#define AMGfallYES 3
#define AMTf_AMAGIC 1
#define AMT_AMAGIC(amt) ((amt)->flags & AMTf_AMAGIC)
#define AMT_AMAGIC_on(amt) ((amt)->flags |= AMTf_AMAGIC)
#define AMT_AMAGIC_off(amt) ((amt)->flags &= ~AMTf_AMAGIC)
#define StashHANDLER(stash,meth) gv_handler((stash),CAT2(meth,_amg))
/*
* some compilers like to redefine cos et alia as faster
* (and less accurate?) versions called F_cos et cetera (Quidquid
* latine dictum sit, altum viditur.) This trick collides with
* the Perl overloading (amg). The following #defines fool both.
*/
#ifdef _FASTMATH
# ifdef atan2
# define F_atan2_amg atan2_amg
# endif
# ifdef cos
# define F_cos_amg cos_amg
# endif
# ifdef exp
# define F_exp_amg exp_amg
# endif
# ifdef log
# define F_log_amg log_amg
# endif
# ifdef pow
# define F_pow_amg pow_amg
# endif
# ifdef sin
# define F_sin_amg sin_amg
# endif
# ifdef sqrt
# define F_sqrt_amg sqrt_amg
# endif
#endif /* _FASTMATH */
#define PERLDB_ALL (PERLDBf_SUB | PERLDBf_LINE | \
PERLDBf_NOOPT | PERLDBf_INTER | \
PERLDBf_SUBLINE| PERLDBf_SINGLE| \
PERLDBf_NAMEEVAL| PERLDBf_NAMEANON | \
PERLDBf_SAVESRC)
/* No _NONAME, _GOTO */
#define PERLDBf_SUB 0x01 /* Debug sub enter/exit */
#define PERLDBf_LINE 0x02 /* Keep line # */
#define PERLDBf_NOOPT 0x04 /* Switch off optimizations */
#define PERLDBf_INTER 0x08 /* Preserve more data for
later inspections */
#define PERLDBf_SUBLINE 0x10 /* Keep subr source lines */
#define PERLDBf_SINGLE 0x20 /* Start with single-step on */
#define PERLDBf_NONAME 0x40 /* For _SUB: no name of the subr */
#define PERLDBf_GOTO 0x80 /* Report goto: call DB::goto */
#define PERLDBf_NAMEEVAL 0x100 /* Informative names for evals */
#define PERLDBf_NAMEANON 0x200 /* Informative names for anon subs */
#define PERLDBf_SAVESRC 0x400 /* Save source lines into @{"_<$filename"} */
#define PERLDBf_SAVESRC_NOSUBS 0x800 /* Including evals that generate no subroutines */
#define PERLDBf_SAVESRC_INVALID 0x1000 /* Save source that did not compile */
#define PERLDB_SUB (PL_perldb & PERLDBf_SUB)
#define PERLDB_LINE (PL_perldb & PERLDBf_LINE)
#define PERLDB_NOOPT (PL_perldb & PERLDBf_NOOPT)
#define PERLDB_INTER (PL_perldb & PERLDBf_INTER)
#define PERLDB_SUBLINE (PL_perldb & PERLDBf_SUBLINE)
#define PERLDB_SINGLE (PL_perldb & PERLDBf_SINGLE)
#define PERLDB_SUB_NN (PL_perldb & PERLDBf_NONAME)
#define PERLDB_GOTO (PL_perldb & PERLDBf_GOTO)
#define PERLDB_NAMEEVAL (PL_perldb & PERLDBf_NAMEEVAL)
#define PERLDB_NAMEANON (PL_perldb & PERLDBf_NAMEANON)
#define PERLDB_SAVESRC (PL_perldb & PERLDBf_SAVESRC)
#define PERLDB_SAVESRC_NOSUBS (PL_perldb & PERLDBf_SAVESRC_NOSUBS)
#define PERLDB_SAVESRC_INVALID (PL_perldb & PERLDBf_SAVESRC_INVALID)
#define PERLDB_LINE_OR_SAVESRC (PL_perldb & (PERLDBf_LINE | PERLDBf_SAVESRC))
#ifdef USE_LOCALE
/* These locale things are all subject to change */
# define LOCALE_INIT MUTEX_INIT(&PL_locale_mutex)
# ifdef USE_THREAD_SAFE_LOCALE
# define LOCALE_TERM \
STMT_START { \
MUTEX_DESTROY(&PL_locale_mutex); \
if (PL_C_locale_obj) { \
/* Make sure we aren't using the locale \
* space we are about to free */ \
uselocale(LC_GLOBAL_LOCALE); \
freelocale(PL_C_locale_obj); \
PL_C_locale_obj = (locale_t) NULL; \
} \
} STMT_END
}
# else
# define LOCALE_TERM MUTEX_DESTROY(&PL_locale_mutex)
# endif
# define LOCALE_LOCK MUTEX_LOCK(&PL_locale_mutex)
# define LOCALE_UNLOCK MUTEX_UNLOCK(&PL_locale_mutex)
/* Returns TRUE if the plain locale pragma without a parameter is in effect
*/
# define IN_LOCALE_RUNTIME (PL_curcop \
&& CopHINTS_get(PL_curcop) & HINT_LOCALE)
/* Returns TRUE if either form of the locale pragma is in effect */
# define IN_SOME_LOCALE_FORM_RUNTIME \
cBOOL(CopHINTS_get(PL_curcop) & (HINT_LOCALE|HINT_LOCALE_PARTIAL))
# define IN_LOCALE_COMPILETIME cBOOL(PL_hints & HINT_LOCALE)
# define IN_SOME_LOCALE_FORM_COMPILETIME \
cBOOL(PL_hints & (HINT_LOCALE|HINT_LOCALE_PARTIAL))
# define IN_LOCALE \
(IN_PERL_COMPILETIME ? IN_LOCALE_COMPILETIME : IN_LOCALE_RUNTIME)
# define IN_SOME_LOCALE_FORM \
(IN_PERL_COMPILETIME ? IN_SOME_LOCALE_FORM_COMPILETIME \
: IN_SOME_LOCALE_FORM_RUNTIME)
# define IN_LC_ALL_COMPILETIME IN_LOCALE_COMPILETIME
# define IN_LC_ALL_RUNTIME IN_LOCALE_RUNTIME
# define IN_LC_PARTIAL_COMPILETIME cBOOL(PL_hints & HINT_LOCALE_PARTIAL)
# define IN_LC_PARTIAL_RUNTIME \
(PL_curcop && CopHINTS_get(PL_curcop) & HINT_LOCALE_PARTIAL)
# define IN_LC_COMPILETIME(category) \
(IN_LC_ALL_COMPILETIME || (IN_LC_PARTIAL_COMPILETIME \
&& _is_in_locale_category(TRUE, (category))))
# define IN_LC_RUNTIME(category) \
(IN_LC_ALL_RUNTIME || (IN_LC_PARTIAL_RUNTIME \
&& _is_in_locale_category(FALSE, (category))))
# define IN_LC(category) \
(IN_LC_COMPILETIME(category) || IN_LC_RUNTIME(category))
# if defined (PERL_CORE) || defined (PERL_IN_XSUB_RE)
/* This internal macro should be called from places that operate under
* locale rules. It there is a problem with the current locale that
* hasn't been raised yet, it will output a warning this time. Because
* this will so rarely be true, there is no point to optimize for
* time; instead it makes sense to minimize space used and do all the
* work in the rarely called function */
# ifdef USE_LOCALE_CTYPE
# define _CHECK_AND_WARN_PROBLEMATIC_LOCALE \
STMT_START { \
if (UNLIKELY(PL_warn_locale)) { \
_warn_problematic_locale(); \
} \
} STMT_END
# else
# define _CHECK_AND_WARN_PROBLEMATIC_LOCALE
# endif
/* These two internal macros are called when a warning should be raised,
* and will do so if enabled. The first takes a single code point
* argument; the 2nd, is a pointer to the first byte of the UTF-8 encoded
* string, and an end position which it won't try to read past */
# define _CHECK_AND_OUTPUT_WIDE_LOCALE_CP_MSG(cp) \
STMT_START { \
if (! PL_in_utf8_CTYPE_locale && ckWARN(WARN_LOCALE)) { \
Perl_warner(aTHX_ packWARN(WARN_LOCALE), \
"Wide character (U+%" UVXf ") in %s",\
(UV) cp, OP_DESC(PL_op)); \
} \
} STMT_END
# define _CHECK_AND_OUTPUT_WIDE_LOCALE_UTF8_MSG(s, send) \
STMT_START { /* Check if to warn before doing the conversion work */\
if (! PL_in_utf8_CTYPE_locale && ckWARN(WARN_LOCALE)) { \
UV cp = utf8_to_uvchr_buf((U8 *) (s), (U8 *) (send), NULL); \
Perl_warner(aTHX_ packWARN(WARN_LOCALE), \
"Wide character (U+%" UVXf ") in %s", \
(cp == 0) \
? UNICODE_REPLACEMENT \
: (UV) cp, \
OP_DESC(PL_op)); \
} \
} STMT_END
# endif /* PERL_CORE or PERL_IN_XSUB_RE */
#if defined(USE_ITHREADS) \
&& defined(HAS_NEWLOCALE) \
&& defined(LC_ALL_MASK) \
&& defined(HAS_FREELOCALE) \
&& defined(HAS_USELOCALE) \
&& ! defined(NO_THREAD_SAFE_USELOCALE)
/* The code is written for simplicity to assume that any platform advanced
* enough to have the Posix 2008 locale functions has LC_ALL. The test
* above makes sure that assumption is valid */
# define USE_THREAD_SAFE_LOCALE
#endif
#else /* No locale usage */
# define LOCALE_INIT
# define LOCALE_TERM
# define LOCALE_LOCK
# define LOCALE_UNLOCK
# define IN_LOCALE_RUNTIME 0
# define IN_SOME_LOCALE_FORM_RUNTIME 0
# define IN_LOCALE_COMPILETIME 0
# define IN_SOME_LOCALE_FORM_COMPILETIME 0
# define IN_LOCALE 0
# define IN_SOME_LOCALE_FORM 0
# define IN_LC_ALL_COMPILETIME 0
# define IN_LC_ALL_RUNTIME 0
# define IN_LC_PARTIAL_COMPILETIME 0
# define IN_LC_PARTIAL_RUNTIME 0
# define IN_LC_COMPILETIME(category) 0
# define IN_LC_RUNTIME(category) 0
# define IN_LC(category) 0
# define _CHECK_AND_WARN_PROBLEMATIC_LOCALE
# define _CHECK_AND_OUTPUT_WIDE_LOCALE_CP_MSG(a)
# define _CHECK_AND_OUTPUT_WIDE_LOCALE_UTF8_MSG(a,b)
#endif
#ifdef USE_LOCALE_NUMERIC
/* These macros are for toggling between the underlying locale (UNDERLYING or
* LOCAL) and the C locale (STANDARD).
=head1 Locale-related functions and macros
=for apidoc Amn|void|DECLARATION_FOR_LC_NUMERIC_MANIPULATION
This macro should be used as a statement. It declares a private variable
(whose name begins with an underscore) that is needed by the other macros in
this section. Failing to include this correctly should lead to a syntax error.
For compatibility with C89 C compilers it should be placed in a block before
any executable statements.
=for apidoc Am|void|STORE_LC_NUMERIC_FORCE_TO_UNDERLYING
This is used by XS code that that is C<LC_NUMERIC> locale-aware to force the
locale for category C<LC_NUMERIC> to be what perl thinks is the current
underlying locale. (The perl interpreter could be wrong about what the
underlying locale actually is if some C or XS code has called the C library
function L<setlocale(3)> behind its back; calling L</sync_locale> before calling
this macro will update perl's records.)
A call to L</DECLARATION_FOR_LC_NUMERIC_MANIPULATION> must have been made to
declare at compile time a private variable used by this macro. This macro
should be called as a single statement, not an expression, but with an empty
argument list, like this:
{
DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
...
STORE_LC_NUMERIC_FORCE_TO_UNDERLYING();
...
RESTORE_LC_NUMERIC();
...
}
The private variable is used to save the current locale state, so
that the requisite matching call to L</RESTORE_LC_NUMERIC> can restore it.
=for apidoc Am|void|STORE_LC_NUMERIC_SET_TO_NEEDED
This is used to help wrap XS or C code that that is C<LC_NUMERIC> locale-aware.
This locale category is generally kept set to the C locale by Perl for
backwards compatibility, and because most XS code that reads floating point
values can cope only with the decimal radix character being a dot.
This macro makes sure the current C<LC_NUMERIC> state is set properly, to be
aware of locale if the call to the XS or C code from the Perl program is
from within the scope of a S<C<use locale>>; or to ignore locale if the call is
instead from outside such scope.
This macro is the start of wrapping the C or XS code; the wrap ending is done
by calling the L</RESTORE_LC_NUMERIC> macro after the operation. Otherwise
the state can be changed that will adversely affect other XS code.
A call to L</DECLARATION_FOR_LC_NUMERIC_MANIPULATION> must have been made to
declare at compile time a private variable used by this macro. This macro
should be called as a single statement, not an expression, but with an empty
argument list, like this:
{
DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
...
STORE_LC_NUMERIC_SET_TO_NEEDED();
...
RESTORE_LC_NUMERIC();
...
}
=for apidoc Am|void|RESTORE_LC_NUMERIC
This is used in conjunction with one of the macros
L</STORE_LC_NUMERIC_SET_TO_NEEDED>
and
L</STORE_LC_NUMERIC_FORCE_TO_UNDERLYING>
to properly restore the C<LC_NUMERIC> state.
A call to L</DECLARATION_FOR_LC_NUMERIC_MANIPULATION> must have been made to
declare at compile time a private variable used by this macro and the two
C<STORE> ones. This macro should be called as a single statement, not an
expression, but with an empty argument list, like this:
{
DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
...
RESTORE_LC_NUMERIC();
...
}
=cut
*/
#define _NOT_IN_NUMERIC_STANDARD (! PL_numeric_standard)
/* We can lock the category to stay in the C locale, making requests to the
* contrary be noops, in the dynamic scope by setting PL_numeric_standard to 2.
* */
#define _NOT_IN_NUMERIC_UNDERLYING \
(! PL_numeric_local && PL_numeric_standard < 2)
#define DECLARATION_FOR_LC_NUMERIC_MANIPULATION \
void (*_restore_LC_NUMERIC_function)(pTHX) = NULL
#define STORE_LC_NUMERIC_SET_TO_NEEDED() \
if (IN_LC(LC_NUMERIC)) { \
if (_NOT_IN_NUMERIC_UNDERLYING) { \
set_numeric_local(); \
_restore_LC_NUMERIC_function = &Perl_set_numeric_standard; \
} \
} \
else { \
if (_NOT_IN_NUMERIC_STANDARD) { \
SET_NUMERIC_STANDARD(); \
_restore_LC_NUMERIC_function = &Perl_set_numeric_local; \
} \
}
#define RESTORE_LC_NUMERIC() \
if (_restore_LC_NUMERIC_function) { \
_restore_LC_NUMERIC_function(aTHX); \
}
/* The next two macros set unconditionally. These should be rarely used, and
* only after being sure that this is what is needed */
#define SET_NUMERIC_STANDARD() \
STMT_START { if (_NOT_IN_NUMERIC_STANDARD) set_numeric_standard(); \
} STMT_END
#define SET_NUMERIC_UNDERLYING() \
STMT_START { if (_NOT_IN_NUMERIC_UNDERLYING) \
set_numeric_local(); } STMT_END
/* The rest of these LC_NUMERIC macros toggle to one or the other state, with
* the RESTORE_foo ones called to switch back, but only if need be */
#define STORE_LC_NUMERIC_UNDERLYING_SET_STANDARD() \
bool _was_local = _NOT_IN_NUMERIC_STANDARD; \
if (_was_local) set_numeric_standard();
/* Doesn't change to underlying locale unless within the scope of some form of
* 'use locale'. This is the usual desired behavior. */
#define STORE_LC_NUMERIC_STANDARD_SET_UNDERLYING() \
bool _was_standard = _NOT_IN_NUMERIC_UNDERLYING \
&& IN_LC(LC_NUMERIC); \
if (_was_standard) set_numeric_local();
/* Rarely, we want to change to the underlying locale even outside of 'use
* locale'. This is principally in the POSIX:: functions */
#define STORE_LC_NUMERIC_FORCE_TO_UNDERLYING() \
if (_NOT_IN_NUMERIC_UNDERLYING) { \
set_numeric_local(); \
_restore_LC_NUMERIC_function = &Perl_set_numeric_standard; \
}
/* Lock/unlock to the C locale until unlock is called. This needs to be
* recursively callable. [perl #128207] */
#define LOCK_LC_NUMERIC_STANDARD() \
(__ASSERT_(PL_numeric_standard) \
PL_numeric_standard++)
#define UNLOCK_LC_NUMERIC_STANDARD() \
STMT_START { \
if (PL_numeric_standard > 1) { \
PL_numeric_standard--; \
} \
else { \
assert(0); \
} \
} STMT_END
#define RESTORE_LC_NUMERIC_UNDERLYING() \
if (_was_local) set_numeric_local();
#define RESTORE_LC_NUMERIC_STANDARD() \
if (_restore_LC_NUMERIC_function) { \
_restore_LC_NUMERIC_function(aTHX); \
}
#else /* !USE_LOCALE_NUMERIC */
#define SET_NUMERIC_STANDARD()
#define SET_NUMERIC_UNDERLYING()
#define IS_NUMERIC_RADIX(a, b) (0)
#define STORE_LC_NUMERIC_UNDERLYING_SET_STANDARD()
#define STORE_LC_NUMERIC_STANDARD_SET_UNDERLYING()
#define STORE_LC_NUMERIC_FORCE_TO_UNDERLYING()
#define RESTORE_LC_NUMERIC_UNDERLYING()
#define RESTORE_LC_NUMERIC_STANDARD()
#define DECLARATION_FOR_LC_NUMERIC_MANIPULATION
#define STORE_LC_NUMERIC_SET_TO_NEEDED()
#define RESTORE_LC_NUMERIC()
#define LOCK_LC_NUMERIC_STANDARD()
#define UNLOCK_LC_NUMERIC_STANDARD()
#endif /* !USE_LOCALE_NUMERIC */
#define Atof my_atof
/* Back-compat names */
#define DECLARATION_FOR_STORE_LC_NUMERIC_SET_TO_NEEDED \
DECLARATION_FOR_LC_NUMERIC_MANIPULATION
#define DECLARE_STORE_LC_NUMERIC_SET_TO_NEEDED() \
DECLARATION_FOR_STORE_LC_NUMERIC_SET_TO_NEEDED; \
STORE_LC_NUMERIC_SET_TO_NEEDED();
#define LOCK_NUMERIC_STANDARD() LOCK_LC_NUMERIC_STANDARD()
#define RESTORE_NUMERIC_LOCAL() RESTORE_LC_NUMERIC_UNDERLYING()
#define RESTORE_NUMERIC_STANDARD() RESTORE_LC_NUMERIC_STANDARD()
#define SET_NUMERIC_LOCAL() SET_NUMERIC_UNDERLYING()
#define STORE_NUMERIC_LOCAL_SET_STANDARD() \
STORE_LC_NUMERIC_UNDERLYING_SET_STANDARD()
#define STORE_NUMERIC_STANDARD_SET_LOCAL() \
STORE_LC_NUMERIC_STANDARD_SET_UNDERLYING()
#define STORE_NUMERIC_STANDARD_FORCE_LOCAL() \
STORE_LC_NUMERIC_FORCE_TO_UNDERLYING()
#define UNLOCK_NUMERIC_STANDARD() UNLOCK_LC_NUMERIC_STANDARD()
#ifdef USE_QUADMATH
# define Perl_strtod(s, e) strtoflt128(s, e)
#elif defined(HAS_LONG_DOUBLE) && defined(USE_LONG_DOUBLE)
# if defined(HAS_STRTOLD)
# define Perl_strtod(s, e) strtold(s, e)
# elif defined(HAS_STRTOD)
# define Perl_strtod(s, e) (NV)strtod(s, e) /* Unavoidable loss. */
# endif
#elif defined(HAS_STRTOD)
# define Perl_strtod(s, e) strtod(s, e)
#endif
#if !defined(Strtol) && defined(USE_64_BIT_INT) && defined(IV_IS_QUAD) && \
(QUADKIND == QUAD_IS_LONG_LONG || QUADKIND == QUAD_IS___INT64)
# ifdef __hpux
# define strtoll __strtoll /* secret handshake */
# endif
# if defined(WIN64) && defined(_MSC_VER)
# define strtoll _strtoi64 /* secret handshake */
# endif
# if !defined(Strtol) && defined(HAS_STRTOLL)
# define Strtol strtoll
# endif
# if !defined(Strtol) && defined(HAS_STRTOQ)
# define Strtol strtoq
# endif
/* is there atoq() anywhere? */
#endif
#if !defined(Strtol) && defined(HAS_STRTOL)
# define Strtol strtol
#endif
#ifndef Atol
/* It would be more fashionable to use Strtol() to define atol()
* (as is done for Atoul(), see below) but for backward compatibility
* we just assume atol(). */
# if defined(USE_64_BIT_INT) && defined(IV_IS_QUAD) && defined(HAS_ATOLL) && \
(QUADKIND == QUAD_IS_LONG_LONG || QUADKIND == QUAD_IS___INT64)
# ifdef WIN64
# define atoll _atoi64 /* secret handshake */
# endif
# define Atol atoll
# else
# define Atol atol
# endif
#endif
#if !defined(Strtoul) && defined(USE_64_BIT_INT) && defined(UV_IS_QUAD) && \
(QUADKIND == QUAD_IS_LONG_LONG || QUADKIND == QUAD_IS___INT64)
# ifdef __hpux
# define strtoull __strtoull /* secret handshake */
# endif
# if defined(WIN64) && defined(_MSC_VER)
# define strtoull _strtoui64 /* secret handshake */
# endif
# if !defined(Strtoul) && defined(HAS_STRTOULL)
# define Strtoul strtoull
# endif
# if !defined(Strtoul) && defined(HAS_STRTOUQ)
# define Strtoul strtouq
# endif
/* is there atouq() anywhere? */
#endif
#if !defined(Strtoul) && defined(HAS_STRTOUL)
# define Strtoul strtoul
#endif
#if !defined(Strtoul) && defined(HAS_STRTOL) /* Last resort. */
# define Strtoul(s, e, b) strchr((s), '-') ? ULONG_MAX : (unsigned long)strtol((s), (e), (b))
#endif
#ifndef Atoul
# define Atoul(s) Strtoul(s, NULL, 10)
#endif
#ifndef PERL_SCRIPT_MODE
#define PERL_SCRIPT_MODE "r"
#endif
/* not used. Kept as a NOOP for backcompat */
#define PERL_STACK_OVERFLOW_CHECK() NOOP
/*
* Some nonpreemptive operating systems find it convenient to
* check for asynchronous conditions after each op execution.
* Keep this check simple, or it may slow down execution
* massively.
*/
#ifndef PERL_MICRO
# ifndef PERL_ASYNC_CHECK
# define PERL_ASYNC_CHECK() if (UNLIKELY(PL_sig_pending)) PL_signalhook(aTHX)
# endif
#endif
#ifndef PERL_ASYNC_CHECK
# define PERL_ASYNC_CHECK() NOOP
#endif
/*
* On some operating systems, a memory allocation may succeed,
* but put the process too close to the system's comfort limit.
* In this case, PERL_ALLOC_CHECK frees the pointer and sets
* it to NULL.
*/
#ifndef PERL_ALLOC_CHECK
#define PERL_ALLOC_CHECK(p) NOOP
#endif
#ifdef HAS_SEM
# include <sys/ipc.h>
# include <sys/sem.h>
# ifndef HAS_UNION_SEMUN /* Provide the union semun. */
union semun {
int val;
struct semid_ds *buf;
unsigned short *array;
};
# endif
# ifdef USE_SEMCTL_SEMUN
# ifdef IRIX32_SEMUN_BROKEN_BY_GCC
union gccbug_semun {
int val;
struct semid_ds *buf;
unsigned short *array;
char __dummy[5];
};
# define semun gccbug_semun
# endif
# define Semctl(id, num, cmd, semun) semctl(id, num, cmd, semun)
# else
# ifdef USE_SEMCTL_SEMID_DS
# ifdef EXTRA_F_IN_SEMUN_BUF
# define Semctl(id, num, cmd, semun) semctl(id, num, cmd, semun.buff)
# else
# define Semctl(id, num, cmd, semun) semctl(id, num, cmd, semun.buf)
# endif
# endif
# endif
#endif
/*
* Boilerplate macros for initializing and accessing interpreter-local
* data from C. All statics in extensions should be reworked to use
* this, if you want to make the extension thread-safe. See
* ext/XS/APItest/APItest.xs for an example of the use of these macros,
* and perlxs.pod for more.
*
* Code that uses these macros is responsible for the following:
* 1. #define MY_CXT_KEY to a unique string, e.g.
* "DynaLoader::_guts" XS_VERSION
* XXX in the current implementation, this string is ignored.
* 2. Declare a typedef named my_cxt_t that is a structure that contains
* all the data that needs to be interpreter-local.
* 3. Use the START_MY_CXT macro after the declaration of my_cxt_t.
* 4. Use the MY_CXT_INIT macro such that it is called exactly once
* (typically put in the BOOT: section).
* 5. Use the members of the my_cxt_t structure everywhere as
* MY_CXT.member.
* 6. Use the dMY_CXT macro (a declaration) in all the functions that
* access MY_CXT.
*/
#if defined(PERL_IMPLICIT_CONTEXT)
/* START_MY_CXT must appear in all extensions that define a my_cxt_t structure,
* right after the definition (i.e. at file scope). The non-threads
* case below uses it to declare the data as static. */
# ifdef PERL_GLOBAL_STRUCT_PRIVATE
# define START_MY_CXT
# define MY_CXT_INDEX Perl_my_cxt_index(aTHX_ MY_CXT_KEY)
# define MY_CXT_INIT_ARG MY_CXT_KEY
# else
# define START_MY_CXT static int my_cxt_index = -1;
# define MY_CXT_INDEX my_cxt_index
# define MY_CXT_INIT_ARG &my_cxt_index
# endif /* #ifdef PERL_GLOBAL_STRUCT_PRIVATE */
/* Creates and zeroes the per-interpreter data.
* (We allocate my_cxtp in a Perl SV so that it will be released when
* the interpreter goes away.) */
# define MY_CXT_INIT \
my_cxt_t *my_cxtp = \
(my_cxt_t*)Perl_my_cxt_init(aTHX_ MY_CXT_INIT_ARG, sizeof(my_cxt_t)); \
PERL_UNUSED_VAR(my_cxtp)
# define MY_CXT_INIT_INTERP(my_perl) \
my_cxt_t *my_cxtp = \
(my_cxt_t*)Perl_my_cxt_init(my_perl, MY_CXT_INIT_ARG, sizeof(my_cxt_t)); \
PERL_UNUSED_VAR(my_cxtp)
/* This declaration should be used within all functions that use the
* interpreter-local data. */
# define dMY_CXT \
my_cxt_t *my_cxtp = (my_cxt_t *)PL_my_cxt_list[MY_CXT_INDEX]
# define dMY_CXT_INTERP(my_perl) \
my_cxt_t *my_cxtp = (my_cxt_t *)(my_perl)->Imy_cxt_list[MY_CXT_INDEX]
/* Clones the per-interpreter data. */
# define MY_CXT_CLONE \
my_cxt_t *my_cxtp = (my_cxt_t*)SvPVX(newSV(sizeof(my_cxt_t)-1));\
void * old_my_cxtp = PL_my_cxt_list[MY_CXT_INDEX]; \
PL_my_cxt_list[MY_CXT_INDEX] = my_cxtp; \
Copy(old_my_cxtp, my_cxtp, 1, my_cxt_t);
/* This macro must be used to access members of the my_cxt_t structure.
* e.g. MY_CXT.some_data */
# define MY_CXT (*my_cxtp)
/* Judicious use of these macros can reduce the number of times dMY_CXT
* is used. Use is similar to pTHX, aTHX etc. */
# define pMY_CXT my_cxt_t *my_cxtp
# define pMY_CXT_ pMY_CXT,
# define _pMY_CXT ,pMY_CXT
# define aMY_CXT my_cxtp
# define aMY_CXT_ aMY_CXT,
# define _aMY_CXT ,aMY_CXT
#else /* PERL_IMPLICIT_CONTEXT */
# define START_MY_CXT static my_cxt_t my_cxt;
# define dMY_CXT_SV dNOOP
# define dMY_CXT dNOOP
# define dMY_CXT_INTERP(my_perl) dNOOP
# define MY_CXT_INIT NOOP
# define MY_CXT_CLONE NOOP
# define MY_CXT my_cxt
# define pMY_CXT void
# define pMY_CXT_
# define _pMY_CXT
# define aMY_CXT
# define aMY_CXT_
# define _aMY_CXT
#endif /* !defined(PERL_IMPLICIT_CONTEXT) */
#ifdef I_FCNTL
# include <fcntl.h>
#endif
#ifdef __Lynx__
# include <fcntl.h>
#endif
#ifdef __amigaos4__
# undef FD_CLOEXEC /* a lie in AmigaOS */
#endif
#ifdef I_SYS_FILE
# include <sys/file.h>
#endif
#if defined(HAS_FLOCK) && !defined(HAS_FLOCK_PROTO)
int flock(int fd, int op);
#endif
#ifndef O_RDONLY
/* Assume UNIX defaults */
# define O_RDONLY 0000
# define O_WRONLY 0001
# define O_RDWR 0002
# define O_CREAT 0100
#endif
#ifndef O_BINARY
# define O_BINARY 0
#endif
#ifndef O_TEXT
# define O_TEXT 0
#endif
#if O_TEXT != O_BINARY
/* If you have different O_TEXT and O_BINARY and you are a CRLF shop,
* that is, you are somehow DOSish. */
# if defined(__HAIKU__) || defined(__VOS__) || defined(__CYGWIN__)
/* Haiku has O_TEXT != O_BINARY but O_TEXT and O_BINARY have no effect;
* Haiku is always UNIXoid (LF), not DOSish (CRLF). */
/* VOS has O_TEXT != O_BINARY, and they have effect,
* but VOS always uses LF, never CRLF. */
/* If you have O_TEXT different from your O_BINARY but you still are
* not a CRLF shop. */
# undef PERLIO_USING_CRLF
# else
/* If you really are DOSish. */
# define PERLIO_USING_CRLF 1
# endif
#endif
#ifdef I_LIBUTIL
# include <libutil.h> /* setproctitle() in some FreeBSDs */
#endif
#ifndef EXEC_ARGV_CAST
#define EXEC_ARGV_CAST(x) (char **)x
#endif
#define IS_NUMBER_IN_UV 0x01 /* number within UV range (maybe not
int). value returned in pointed-
to UV */
#define IS_NUMBER_GREATER_THAN_UV_MAX 0x02 /* pointed to UV undefined */
#define IS_NUMBER_NOT_INT 0x04 /* saw . or E notation or infnan */
#define IS_NUMBER_NEG 0x08 /* leading minus sign */
#define IS_NUMBER_INFINITY 0x10 /* this is big */
#define IS_NUMBER_NAN 0x20 /* this is not */
#define IS_NUMBER_TRAILING 0x40 /* number has trailing trash */
#define GROK_NUMERIC_RADIX(sp, send) grok_numeric_radix(sp, send)
/* Input flags: */
#define PERL_SCAN_ALLOW_UNDERSCORES 0x01 /* grok_??? accept _ in numbers */
#define PERL_SCAN_DISALLOW_PREFIX 0x02 /* grok_??? reject 0x in hex etc */
#define PERL_SCAN_SILENT_ILLDIGIT 0x04 /* grok_??? not warn about illegal digits */
#define PERL_SCAN_SILENT_NON_PORTABLE 0x08 /* grok_??? not warn about very large
numbers which are <= UV_MAX */
#define PERL_SCAN_TRAILING 0x10 /* grok_number_flags() allow trailing
and set IS_NUMBER_TRAILING */
/* Output flags: */
#define PERL_SCAN_GREATER_THAN_UV_MAX 0x02 /* should this merge with above? */
/* to let user control profiling */
#ifdef PERL_GPROF_CONTROL
extern void moncontrol(int);
#define PERL_GPROF_MONCONTROL(x) moncontrol(x)
#else
#define PERL_GPROF_MONCONTROL(x)
#endif
#ifdef UNDER_CE
#include "wince.h"
#endif
/* ISO 6429 NEL - C1 control NExt Line */
/* See http://www.unicode.org/unicode/reports/tr13/ */
#define NEXT_LINE_CHAR NEXT_LINE_NATIVE
#ifndef PIPESOCK_MODE
# define PIPESOCK_MODE
#endif
#ifndef SOCKET_OPEN_MODE
# define SOCKET_OPEN_MODE PIPESOCK_MODE
#endif
#ifndef PIPE_OPEN_MODE
# define PIPE_OPEN_MODE PIPESOCK_MODE
#endif
#define PERL_MAGIC_UTF8_CACHESIZE 2
#define PERL_UNICODE_STDIN_FLAG 0x0001
#define PERL_UNICODE_STDOUT_FLAG 0x0002
#define PERL_UNICODE_STDERR_FLAG 0x0004
#define PERL_UNICODE_IN_FLAG 0x0008
#define PERL_UNICODE_OUT_FLAG 0x0010
#define PERL_UNICODE_ARGV_FLAG 0x0020
#define PERL_UNICODE_LOCALE_FLAG 0x0040
#define PERL_UNICODE_WIDESYSCALLS_FLAG 0x0080 /* for Sarathy */
#define PERL_UNICODE_UTF8CACHEASSERT_FLAG 0x0100
#define PERL_UNICODE_STD_FLAG \
(PERL_UNICODE_STDIN_FLAG | \
PERL_UNICODE_STDOUT_FLAG | \
PERL_UNICODE_STDERR_FLAG)
#define PERL_UNICODE_INOUT_FLAG \
(PERL_UNICODE_IN_FLAG | \
PERL_UNICODE_OUT_FLAG)
#define PERL_UNICODE_DEFAULT_FLAGS \
(PERL_UNICODE_STD_FLAG | \
PERL_UNICODE_INOUT_FLAG | \
PERL_UNICODE_LOCALE_FLAG)
#define PERL_UNICODE_ALL_FLAGS 0x01ff
#define PERL_UNICODE_STDIN 'I'
#define PERL_UNICODE_STDOUT 'O'
#define PERL_UNICODE_STDERR 'E'
#define PERL_UNICODE_STD 'S'
#define PERL_UNICODE_IN 'i'
#define PERL_UNICODE_OUT 'o'
#define PERL_UNICODE_INOUT 'D'
#define PERL_UNICODE_ARGV 'A'
#define PERL_UNICODE_LOCALE 'L'
#define PERL_UNICODE_WIDESYSCALLS 'W'
#define PERL_UNICODE_UTF8CACHEASSERT 'a'
#define PERL_SIGNALS_UNSAFE_FLAG 0x0001
/* Use instead of abs() since abs() forces its argument to be an int,
* but also beware since this evaluates its argument twice, so no x++. */
#define PERL_ABS(x) ((x) < 0 ? -(x) : (x))
#if defined(__DECC) && defined(__osf__)
#pragma message disable (mainparm) /* Perl uses the envp in main(). */
#endif
#define do_open(g, n, l, a, rm, rp, sf) \
do_openn(g, n, l, a, rm, rp, sf, (SV **) NULL, 0)
#ifdef PERL_DEFAULT_DO_EXEC3_IMPLEMENTATION
# define do_exec(cmd) do_exec3(cmd,0,0)
#endif
#ifdef OS2
# define do_aexec Perl_do_aexec
#else
# define do_aexec(really, mark,sp) do_aexec5(really, mark, sp, 0, 0)
#endif
/* check embedded \0 characters in pathnames passed to syscalls,
but allow one ending \0 */
#define IS_SAFE_SYSCALL(p, len, what, op_name) (S_is_safe_syscall(aTHX_ (p), (len), (what), (op_name)))
#define IS_SAFE_PATHNAME(p, len, op_name) IS_SAFE_SYSCALL((p), (len), "pathname", (op_name))
#if defined(OEMVS) || defined(__amigaos4__)
#define NO_ENV_ARRAY_IN_MAIN
#endif
/* These are used by Perl_pv_escape() and Perl_pv_pretty()
* are here so that they are available throughout the core
* NOTE that even though some are for _escape and some for _pretty
* there must not be any clashes as the flags from _pretty are
* passed straight through to _escape.
*/
#define PERL_PV_ESCAPE_QUOTE 0x000001
#define PERL_PV_PRETTY_QUOTE PERL_PV_ESCAPE_QUOTE
#define PERL_PV_PRETTY_ELLIPSES 0x000002
#define PERL_PV_PRETTY_LTGT 0x000004
#define PERL_PV_PRETTY_EXACTSIZE 0x000008
#define PERL_PV_ESCAPE_UNI 0x000100
#define PERL_PV_ESCAPE_UNI_DETECT 0x000200
#define PERL_PV_ESCAPE_NONASCII 0x000400
#define PERL_PV_ESCAPE_FIRSTCHAR 0x000800
#define PERL_PV_ESCAPE_ALL 0x001000
#define PERL_PV_ESCAPE_NOBACKSLASH 0x002000
#define PERL_PV_ESCAPE_NOCLEAR 0x004000
#define PERL_PV_PRETTY_NOCLEAR PERL_PV_ESCAPE_NOCLEAR
#define PERL_PV_ESCAPE_RE 0x008000
#define PERL_PV_ESCAPE_DWIM 0x010000
/* used by pv_display in dump.c*/
#define PERL_PV_PRETTY_DUMP PERL_PV_PRETTY_ELLIPSES|PERL_PV_PRETTY_QUOTE
#define PERL_PV_PRETTY_REGPROP PERL_PV_PRETTY_ELLIPSES|PERL_PV_PRETTY_LTGT|PERL_PV_ESCAPE_RE|PERL_PV_ESCAPE_NONASCII
#if DOUBLEKIND == DOUBLE_IS_VAX_F_FLOAT || \
DOUBLEKIND == DOUBLE_IS_VAX_D_FLOAT || \
DOUBLEKIND == DOUBLE_IS_VAX_G_FLOAT
# define DOUBLE_IS_VAX_FLOAT
#else
# define DOUBLE_IS_IEEE_FORMAT
#endif
#if DOUBLEKIND == DOUBLE_IS_IEEE_754_32_BIT_LITTLE_ENDIAN || \
DOUBLEKIND == DOUBLE_IS_IEEE_754_64_BIT_LITTLE_ENDIAN || \
DOUBLEKIND == DOUBLE_IS_IEEE_754_128_BIT_LITTLE_ENDIAN
# define DOUBLE_LITTLE_ENDIAN
#endif
#if DOUBLEKIND == DOUBLE_IS_IEEE_754_32_BIT_BIG_ENDIAN || \
DOUBLEKIND == DOUBLE_IS_IEEE_754_64_BIT_BIG_ENDIAN || \
DOUBLEKIND == DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN
# define DOUBLE_BIG_ENDIAN
#endif
#if DOUBLEKIND == DOUBLE_IS_IEEE_754_64_BIT_MIXED_ENDIAN_LE_BE || \
DOUBLEKIND == DOUBLE_IS_IEEE_754_64_BIT_MIXED_ENDIAN_BE_LE
# define DOUBLE_MIX_ENDIAN
#endif
/* The VAX fp formats are neither consistently little-endian nor
* big-endian, and neither are they really IEEE-mixed endian like
* the mixed-endian ARM IEEE formats (with swapped bytes).
* Ultimately, the VAX format came from the PDP-11.
*
* The ordering of the parts in VAX floats is quite vexing.
* In the below the fraction_n are the mantissa bits.
*
* The fraction_1 is the most significant (numbering as by DEC/Digital),
* while the rightmost bit in each fraction is the least significant:
* in other words, big-endian bit order within the fractions.
*
* The fraction segments themselves would be big-endianly, except that
* within 32 bit segments the less significant half comes first, the more
* significant after, except that in the format H (used for long doubles)
* the first fraction segment is alone, because the exponent is wider.
* This means for example that both the most and the least significant
* bits can be in the middle of the floats, not at either end.
*
* References:
* http://nssdc.gsfc.nasa.gov/nssdc/formats/VAXFloatingPoint.htm
* http://www.quadibloc.com/comp/cp0201.htm
* http://h71000.www7.hp.com/doc/82final/6443/6443pro_028.html
* (somebody at HP should be fired for the URLs)
*
* F fraction_2:16 sign:1 exp:8 fraction_1:7
* (exponent bias 128, hidden first one-bit)
*
* D fraction_2:16 sign:1 exp:8 fraction_1:7
* fraction_4:16 fraction_3:16
* (exponent bias 128, hidden first one-bit)
*
* G fraction_2:16 sign:1 exp:11 fraction_1:4
* fraction_4:16 fraction_3:16
* (exponent bias 1024, hidden first one-bit)
*
* H fraction_1:16 sign:1 exp:15
* fraction_3:16 fraction_2:16
* fraction_5:16 fraction_4:16
* fraction_7:16 fraction_6:16
* (exponent bias 16384, hidden first one-bit)
* (available only on VAX, and only on Fortran?)
*
* The formats S, T and X are available on the Alpha (and Itanium,
* also known as I64/IA64) and are equivalent with the IEEE-754 formats
* binary32, binary64, and binary128 (commonly: float, double, long double).
*
* S sign:1 exp:8 mantissa:23
* (exponent bias 127, hidden first one-bit)
*
* T sign:1 exp:11 mantissa:52
* (exponent bias 1022, hidden first one-bit)
*
* X sign:1 exp:15 mantissa:112
* (exponent bias 16382, hidden first one-bit)
*
*/
#ifdef DOUBLE_IS_VAX_FLOAT
# define DOUBLE_VAX_ENDIAN
#endif
#ifdef DOUBLE_IS_IEEE_FORMAT
/* All the basic IEEE formats have the implicit bit,
* except for the x86 80-bit extended formats, which will undef this.
* Also note that the IEEE 754 subnormals (formerly known as denormals)
* do not have the implicit bit of one. */
# define NV_IMPLICIT_BIT
#endif
#if defined(LONG_DOUBLEKIND) && LONG_DOUBLEKIND != LONG_DOUBLE_IS_DOUBLE
# if LONG_DOUBLEKIND == LONG_DOUBLE_IS_IEEE_754_128_BIT_LITTLE_ENDIAN || \
LONG_DOUBLEKIND == LONG_DOUBLE_IS_X86_80_BIT_LITTLE_ENDIAN || \
LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_LE
# define LONGDOUBLE_LITTLE_ENDIAN
# endif
# if LONG_DOUBLEKIND == LONG_DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN || \
LONG_DOUBLEKIND == LONG_DOUBLE_IS_X86_80_BIT_BIG_ENDIAN || \
LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_BE
# define LONGDOUBLE_BIG_ENDIAN
# endif
# if LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_BE || \
LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_LE
# define LONGDOUBLE_MIX_ENDIAN
# endif
# if LONG_DOUBLEKIND == LONG_DOUBLE_IS_X86_80_BIT_LITTLE_ENDIAN || \
LONG_DOUBLEKIND == LONG_DOUBLE_IS_X86_80_BIT_BIG_ENDIAN
# define LONGDOUBLE_X86_80_BIT
# ifdef USE_LONG_DOUBLE
# undef NV_IMPLICIT_BIT
# define NV_X86_80_BIT
# endif
# endif
# if LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_LE || \
LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_BE || \
LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_BE || \
LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_LE
# define LONGDOUBLE_DOUBLEDOUBLE
# endif
# if LONG_DOUBLEKIND == LONG_DOUBLE_IS_VAX_H_FLOAT
# define LONGDOUBLE_VAX_ENDIAN
# endif
#endif /* LONG_DOUBLEKIND */
#ifdef USE_QUADMATH /* assume quadmath endianness == native double endianness */
# if defined(DOUBLE_LITTLE_ENDIAN)
# define NV_LITTLE_ENDIAN
# elif defined(DOUBLE_BIG_ENDIAN)
# define NV_BIG_ENDIAN
# elif defined(DOUBLE_MIX_ENDIAN) /* stretch */
# define NV_MIX_ENDIAN
# endif
#elif NVSIZE == DOUBLESIZE
# ifdef DOUBLE_LITTLE_ENDIAN
# define NV_LITTLE_ENDIAN
# endif
# ifdef DOUBLE_BIG_ENDIAN
# define NV_BIG_ENDIAN
# endif
# ifdef DOUBLE_MIX_ENDIAN
# define NV_MIX_ENDIAN
# endif
# ifdef DOUBLE_VAX_ENDIAN
# define NV_VAX_ENDIAN
# endif
#elif NVSIZE == LONG_DOUBLESIZE
# ifdef LONGDOUBLE_LITTLE_ENDIAN
# define NV_LITTLE_ENDIAN
# endif
# ifdef LONGDOUBLE_BIG_ENDIAN
# define NV_BIG_ENDIAN
# endif
# ifdef LONGDOUBLE_MIX_ENDIAN
# define NV_MIX_ENDIAN
# endif
# ifdef LONGDOUBLE_VAX_ENDIAN
# define NV_VAX_ENDIAN
# endif
#endif
/* We have somehow managed not to define the denormal/subnormal
* detection.
*
* This may happen if the compiler doesn't expose the C99 math like
* the fpclassify() without some special switches. Perl tries to
* stay C89, so for example -std=c99 is not an option.
*
* The Perl_isinf() and Perl_isnan() should have been defined even if
* the C99 isinf() and isnan() are unavailable, and the NV_MIN becomes
* from the C89 DBL_MIN or moral equivalent. */
#if !defined(Perl_fp_class_denorm) && defined(Perl_isinf) && defined(Perl_isnan) && defined(NV_MIN)
# define Perl_fp_class_denorm(x) ((x) != 0.0 && !Perl_isinf(x) && !Perl_isnan(x) && PERL_ABS(x) < NV_MIN)
#endif
/* This is not a great fallback: subnormals tests will fail,
* but at least Perl will link and 99.999% of tests will work. */
#if !defined(Perl_fp_class_denorm)
# define Perl_fp_class_denorm(x) FALSE
#endif
#ifdef DOUBLE_IS_IEEE_FORMAT
# define DOUBLE_HAS_INF
# define DOUBLE_HAS_NAN
#endif
#ifdef DOUBLE_HAS_NAN
#ifdef DOINIT
/* PL_inf and PL_nan initialization.
*
* For inf and nan initialization the ultimate fallback is dividing
* one or zero by zero: however, some compilers will warn or even fail
* on divide-by-zero, but hopefully something earlier will work.
*
* If you are thinking of using HUGE_VAL for infinity, or using
* <math.h> functions to generate NV_INF (e.g. exp(1e9), log(-1.0)),
* stop. Neither will work portably: HUGE_VAL can be just DBL_MAX,
* and the math functions might be just generating DBL_MAX, or even zero.
*
* Also, do NOT try doing NV_NAN based on NV_INF and trying (NV_INF-NV_INF).
* Though logically correct, some compilers (like Visual C 2003)
* falsely misoptimize that to zero (x-x is always zero, right?)
*
* Finally, note that not all floating point formats define Inf (or NaN).
* For the infinity a large number may be used instead. Operations that
* under the IEEE floating point would return Inf or NaN may return
* either large numbers (positive or negative), or they may cause
* a floating point exception or some other fault.
*/
/* The quadmath literals are anon structs which -Wc++-compat doesn't like. */
GCC_DIAG_IGNORE(-Wc++-compat)
# ifdef USE_QUADMATH
/* Cannot use HUGE_VALQ for PL_inf because not a compile-time
* constant. */
INFNAN_NV_U8_DECL PL_inf = { 1.0Q/0.0Q };
# elif NVSIZE == LONG_DOUBLESIZE && defined(LONGDBLINFBYTES)
INFNAN_U8_NV_DECL PL_inf = { { LONGDBLINFBYTES } };
# elif NVSIZE == DOUBLESIZE && defined(DOUBLEINFBYTES)
INFNAN_U8_NV_DECL PL_inf = { { DOUBLEINFBYTES } };
# else
# if NVSIZE == LONG_DOUBLESIZE && defined(USE_LONG_DOUBLE)
# if defined(LDBL_INFINITY)
INFNAN_NV_U8_DECL PL_inf = { LDBL_INFINITY };
# elif defined(LDBL_INF)
INFNAN_NV_U8_DECL PL_inf = { LDBL_INF };
# elif defined(INFINITY)
INFNAN_NV_U8_DECL PL_inf = { (NV)INFINITY };
# elif defined(INF)
INFNAN_NV_U8_DECL PL_inf = { (NV)INF };
# else
INFNAN_NV_U8_DECL PL_inf = { 1.0L/0.0L }; /* keep last */
# endif
# else
# if defined(DBL_INFINITY)
INFNAN_NV_U8_DECL PL_inf = { DBL_INFINITY };
# elif defined(DBL_INF)
INFNAN_NV_U8_DECL PL_inf = { DBL_INF };
# elif defined(INFINITY) /* C99 */
INFNAN_NV_U8_DECL PL_inf = { (NV)INFINITY };
# elif defined(INF)
INFNAN_NV_U8_DECL PL_inf = { (NV)INF };
# else
INFNAN_NV_U8_DECL PL_inf = { 1.0/0.0 }; /* keep last */
# endif
# endif
# endif
# ifdef USE_QUADMATH
/* Cannot use nanq("0") for PL_nan because not a compile-time
* constant. */
INFNAN_NV_U8_DECL PL_nan = { 0.0Q/0.0Q };
# elif NVSIZE == LONG_DOUBLESIZE && defined(LONGDBLNANBYTES)
INFNAN_U8_NV_DECL PL_nan = { { LONGDBLNANBYTES } };
# elif NVSIZE == DOUBLESIZE && defined(DOUBLENANBYTES)
INFNAN_U8_NV_DECL PL_nan = { { DOUBLENANBYTES } };
# else
# if NVSIZE == LONG_DOUBLESIZE && defined(USE_LONG_DOUBLE)
# if defined(LDBL_NAN)
INFNAN_NV_U8_DECL PL_nan = { LDBL_NAN };
# elif defined(LDBL_QNAN)
INFNAN_NV_U8_DECL PL_nan = { LDBL_QNAN };
# elif defined(NAN)
INFNAN_NV_U8_DECL PL_nan = { (NV)NAN };
# else
INFNAN_NV_U8_DECL PL_nan = { 0.0L/0.0L }; /* keep last */
# endif
# else
# if defined(DBL_NAN)
INFNAN_NV_U8_DECL PL_nan = { DBL_NAN };
# elif defined(DBL_QNAN)
INFNAN_NV_U8_DECL PL_nan = { DBL_QNAN };
# elif defined(NAN) /* C99 */
INFNAN_NV_U8_DECL PL_nan = { (NV)NAN };
# else
INFNAN_NV_U8_DECL PL_nan = { 0.0/0.0 }; /* keep last */
# endif
# endif
# endif
GCC_DIAG_RESTORE
#else
INFNAN_NV_U8_DECL PL_inf;
INFNAN_NV_U8_DECL PL_nan;
#endif
/* If you have not defined NV_INF/NV_NAN (like for example win32/win32.h),
* we will define NV_INF/NV_NAN as the nv part of the global const
* PL_inf/PL_nan. Note, however, that the preexisting NV_INF/NV_NAN
* might not be a compile-time constant, in which case it cannot be
* used to initialize PL_inf/PL_nan above. */
#ifndef NV_INF
# define NV_INF PL_inf.nv
#endif
#ifndef NV_NAN
# define NV_NAN PL_nan.nv
#endif
/* NaNs (not-a-numbers) can carry payload bits, in addition to
* "nan-ness". Part of the payload is the quiet/signaling bit.
* To back up a bit (harhar):
*
* For IEEE 754 64-bit formats [1]:
*
* s 000 (mantissa all-zero) zero
* s 000 (mantissa non-zero) subnormals (denormals)
* s 001 ... 7fe normals
* s 7ff q nan
*
* For IEEE 754 128-bit formats:
*
* s 0000 (mantissa all-zero) zero
* s 0000 (mantissa non-zero) subnormals (denormals)
* s 0001 ... 7ffe normals
* s 7fff q nan
*
* [1] this looks like big-endian, but applies equally to little-endian.
*
* s = Sign bit. Yes, zeros and nans can have negative sign,
* the interpretation is application-specific.
*
* q = Quietness bit, the interpretation is platform-specific.
* Most platforms have the most significant bit being one
* meaning quiet, but some (older mips, hppa) have the msb
* being one meaning signaling. Note that the above means
* that on most platforms there cannot be signaling nan with
* zero payload because that is identical with infinity;
* while conversely on older mips/hppa there cannot be a quiet nan
* because that is identical with infinity.
*
* Moreover, whether there is any behavioral difference
* between quiet and signaling NaNs, depends on the platform.
*
* x86 80-bit extended precision is different, the mantissa bits:
*
* 63 62 61 30387+ pre-387 visual c
* -------- ---- -------- --------
* 0 0 0 invalid infinity
* 0 0 1 invalid snan
* 0 1 0 invalid snan
* 0 1 1 invalid snan
* 1 0 0 infinity snan 1.#INF
* 1 0 1 snan 1.#SNAN
* 1 1 0 qnan -1.#IND (x86 chooses this to negative)
* 1 1 1 qnan 1.#QNAN
*
* This means that in this format there are 61 bits available
* for the nan payload.
*
* Note that the 32-bit x86 ABI cannot do signaling nans: the x87
* simply cannot preserve the bit. You can either use the 80-bit
* extended precision (long double, -Duselongdouble), or use x86-64.
*
* In all platforms, the payload bytes (and bits, some of them are
* often in a partial byte) themselves can be either all zero (x86),
* all one (sparc or mips), or a mixture: in IEEE 754 128-bit double
* or in a double-double, the first half of the payload can follow the
* native double, while in the second half the payload can be all
* zeros. (Therefore the mask for payload bits is not necessarily
* identical to bit complement of the NaN.) Another way of putting
* this: the payload for the default NaN might not be zero.
*
* For the x86 80-bit long doubles, the trailing bytes (the 80 bits
* being 'packaged' in either 12 or 16 bytes) can be whatever random
* garbage.
*
* Furthermore, the semantics of the sign bit on NaNs are platform-specific.
* On normal floats, the sign bit being on means negative. But this may,
* or may not, be reverted on NaNs: in other words, the default NaN might
* have the sign bit on, and therefore look like negative if you look
* at it at the bit level.
*
* NaN payloads are not propagated even on copies, or in arithmetics.
* They *might* be, according to some rules, on your particular
* cpu/os/compiler/libraries, but no guarantees.
*
* To summarize, on most platforms, and for 64-bit doubles
* (using big-endian ordering here):
*
* [7FF8000000000000..7FFFFFFFFFFFFFFF] quiet
* [FFF8000000000000..FFFFFFFFFFFFFFFF] quiet
* [7FF0000000000001..7FF7FFFFFFFFFFFF] signaling
* [FFF0000000000001..FFF7FFFFFFFFFFFF] signaling
*
* The C99 nan() is supposed to generate *quiet* NaNs.
*
* Note the asymmetry:
* The 7FF0000000000000 is positive infinity,
* the FFF0000000000000 is negative infinity.
*/
/* NVMANTBITS is the number of _real_ mantissa bits in an NV.
* For the standard IEEE 754 fp this number is usually one less that
* *DBL_MANT_DIG because of the implicit (aka hidden) bit, which isn't
* real. For the 80-bit extended precision formats (x86*), the number
* of mantissa bits... depends. For normal floats, it's 64. But for
* the inf/nan, it's different (zero for inf, 61 for nan).
* NVMANTBITS works for normal floats. */
/* We do not want to include the quiet/signaling bit. */
#define NV_NAN_BITS (NVMANTBITS - 1)
#if defined(USE_LONG_DOUBLE) && NVSIZE > DOUBLESIZE
# if LONG_DOUBLEKIND == LONG_DOUBLE_IS_IEEE_754_128_BIT_LITTLE_ENDIAN
# define NV_NAN_QS_BYTE_OFFSET 13
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN
# define NV_NAN_QS_BYTE_OFFSET 2
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_X86_80_BIT_LITTLE_ENDIAN
# define NV_NAN_QS_BYTE_OFFSET 7
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_X86_80_BIT_BIG_ENDIAN
# define NV_NAN_QS_BYTE_OFFSET 2
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_LE
# define NV_NAN_QS_BYTE_OFFSET 13
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_BE
# define NV_NAN_QS_BYTE_OFFSET 1
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_BE
# define NV_NAN_QS_BYTE_OFFSET 9
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_LE
# define NV_NAN_QS_BYTE_OFFSET 6
# else
# error "Unexpected long double format"
# endif
#else
# ifdef USE_QUADMATH
# ifdef NV_LITTLE_ENDIAN
# define NV_NAN_QS_BYTE_OFFSET 13
# elif defined(NV_BIG_ENDIAN)
# define NV_NAN_QS_BYTE_OFFSET 2
# else
# error "Unexpected quadmath format"
# endif
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_32_BIT_LITTLE_ENDIAN
# define NV_NAN_QS_BYTE_OFFSET 2
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_32_BIT_BIG_ENDIAN
# define NV_NAN_QS_BYTE_OFFSET 1
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_64_BIT_LITTLE_ENDIAN
# define NV_NAN_QS_BYTE_OFFSET 6
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_64_BIT_BIG_ENDIAN
# define NV_NAN_QS_BYTE_OFFSET 1
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_128_BIT_LITTLE_ENDIAN
# define NV_NAN_QS_BYTE_OFFSET 13
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN
# define NV_NAN_QS_BYTE_OFFSET 2
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_64_BIT_MIXED_ENDIAN_LE_BE
# define NV_NAN_QS_BYTE_OFFSET 2 /* bytes 4 5 6 7 0 1 2 3 (MSB 7) */
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_64_BIT_MIXED_ENDIAN_BE_LE
# define NV_NAN_QS_BYTE_OFFSET 5 /* bytes 3 2 1 0 7 6 5 4 (MSB 7) */
# else
/* For example the VAX formats should never
* get here because they do not have NaN. */
# error "Unexpected double format"
# endif
#endif
/* NV_NAN_QS_BYTE is the byte to test for the quiet/signaling */
#define NV_NAN_QS_BYTE(nvp) (((U8*)(nvp))[NV_NAN_QS_BYTE_OFFSET])
/* NV_NAN_QS_BIT is the bit to test in the NV_NAN_QS_BYTE_OFFSET
* for the quiet/signaling */
#if defined(USE_LONG_DOUBLE) && \
(LONG_DOUBLEKIND == LONG_DOUBLE_IS_X86_80_BIT_LITTLE_ENDIAN || \
LONG_DOUBLEKIND == LONG_DOUBLE_IS_X86_80_BIT_BIG_ENDIAN)
# define NV_NAN_QS_BIT_SHIFT 6 /* 0x40 */
#elif defined(USE_LONG_DOUBLE) && \
(LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_LE || \
LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_BE || \
LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_BE || \
LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_LE)
# define NV_NAN_QS_BIT_SHIFT 3 /* 0x08, but not via NV_NAN_BITS */
#else
# define NV_NAN_QS_BIT_SHIFT ((NV_NAN_BITS) % 8) /* usually 3, or 0x08 */
#endif
#define NV_NAN_QS_BIT (1 << (NV_NAN_QS_BIT_SHIFT))
/* NV_NAN_QS_BIT_OFFSET is the bit offset from the beginning of a NV
* (bytes ordered big-endianly) for the quiet/signaling bit
* for the quiet/signaling */
#define NV_NAN_QS_BIT_OFFSET \
(8 * (NV_NAN_QS_BYTE_OFFSET) + (NV_NAN_QS_BIT_SHIFT))
/* NV_NAN_QS_QUIET (always defined) is true if the NV_NAN_QS_QS_BIT being
* on indicates quiet NaN. NV_NAN_QS_SIGNALING (also always defined)
* is true if the NV_NAN_QS_BIT being on indicates signaling NaN. */
#define NV_NAN_QS_QUIET \
((NV_NAN_QS_BYTE(PL_nan.u8) & NV_NAN_QS_BIT) == NV_NAN_QS_BIT)
#define NV_NAN_QS_SIGNALING (!(NV_NAN_QS_QUIET))
#define NV_NAN_QS_TEST(nvp) (NV_NAN_QS_BYTE(nvp) & NV_NAN_QS_BIT)
/* NV_NAN_IS_QUIET() returns true if the NV behind nvp is a NaN,
* whether it is a quiet NaN, NV_NAN_IS_SIGNALING() if a signaling NaN.
* Note however that these do not check whether the nvp is a NaN. */
#define NV_NAN_IS_QUIET(nvp) \
(NV_NAN_QS_TEST(nvp) == (NV_NAN_QS_QUIET ? NV_NAN_QS_BIT : 0))
#define NV_NAN_IS_SIGNALING(nvp) \
(NV_NAN_QS_TEST(nvp) == (NV_NAN_QS_QUIET ? 0 : NV_NAN_QS_BIT))
#define NV_NAN_SET_QUIET(nvp) \
(NV_NAN_QS_QUIET ? \
(NV_NAN_QS_BYTE(nvp) |= NV_NAN_QS_BIT) : \
(NV_NAN_QS_BYTE(nvp) &= ~NV_NAN_QS_BIT))
#define NV_NAN_SET_SIGNALING(nvp) \
(NV_NAN_QS_QUIET ? \
(NV_NAN_QS_BYTE(nvp) &= ~NV_NAN_QS_BIT) : \
(NV_NAN_QS_BYTE(nvp) |= NV_NAN_QS_BIT))
#define NV_NAN_QS_XOR(nvp) (NV_NAN_QS_BYTE(nvp) ^= NV_NAN_QS_BIT)
/* NV_NAN_PAYLOAD_MASK: masking the nan payload bits.
*
* NV_NAN_PAYLOAD_PERM: permuting the nan payload bytes.
* 0xFF means "don't go here".*/
/* Shorthands to avoid typoses. */
#define NV_NAN_PAYLOAD_MASK_SKIP_EIGHT \
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0
#define NV_NAN_PAYLOAD_PERM_SKIP_EIGHT \
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
#define NV_NAN_PAYLOAD_PERM_0_TO_7 \
0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
#define NV_NAN_PAYLOAD_PERM_7_TO_0 \
0x7, 0x6, 0x5, 0x4, 0x3, 0x2, 0x1, 0x0
#define NV_NAN_PAYLOAD_MASK_IEEE_754_128_LE \
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \
0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00
#define NV_NAN_PAYLOAD_PERM_IEEE_754_128_LE \
NV_NAN_PAYLOAD_PERM_0_TO_7, \
0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xFF, 0xFF
#define NV_NAN_PAYLOAD_MASK_IEEE_754_128_BE \
0x00, 0x00, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, \
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
#define NV_NAN_PAYLOAD_PERM_IEEE_754_128_BE \
0xFF, 0xFF, 0xd, 0xc, 0xb, 0xa, 0x9, 0x8, \
NV_NAN_PAYLOAD_PERM_7_TO_0
#define NV_NAN_PAYLOAD_MASK_IEEE_754_64_LE \
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00
#define NV_NAN_PAYLOAD_PERM_IEEE_754_64_LE \
0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0xFF
#define NV_NAN_PAYLOAD_MASK_IEEE_754_64_BE \
0x00, 0x07, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
#define NV_NAN_PAYLOAD_PERM_IEEE_754_64_BE \
0xFF, 0x6, 0x5, 0x4, 0x3, 0x2, 0x1, 0x0
#if defined(USE_LONG_DOUBLE) && NVSIZE > DOUBLESIZE
# if LONG_DOUBLEKIND == LONG_DOUBLE_IS_IEEE_754_128_BIT_LITTLE_ENDIAN
# define NV_NAN_PAYLOAD_MASK NV_NAN_PAYLOAD_MASK_IEEE_754_128_LE
# define NV_NAN_PAYLOAD_PERM NV_NAN_PAYLOAD_PERM_IEEE_754_128_LE
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN
# define NV_NAN_PAYLOAD_MASK NV_NAN_PAYLOAD_MASK_IEEE_754_128_BE
# define NV_NAN_PAYLOAD_PERM NV_NAN_PAYLOAD_PERM_IEEE_754_128_BE
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_X86_80_BIT_LITTLE_ENDIAN
# if LONG_DOUBLESIZE == 10
# define NV_NAN_PAYLOAD_MASK \
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, \
0x00, 0x00
# define NV_NAN_PAYLOAD_PERM \
NV_NAN_PAYLOAD_PERM_0_TO_7, 0xFF, 0xFF
# elif LONG_DOUBLESIZE == 12
# define NV_NAN_PAYLOAD_MASK \
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, \
0x00, 0x00, 0x00, 0x00
# define NV_NAN_PAYLOAD_PERM \
NV_NAN_PAYLOAD_PERM_0_TO_7, 0xFF, 0xFF, 0xFF, 0xFF
# elif LONG_DOUBLESIZE == 16
# define NV_NAN_PAYLOAD_MASK \
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
# define NV_NAN_PAYLOAD_PERM \
NV_NAN_PAYLOAD_PERM_0_TO_7, \
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
# else
# error "Unexpected x86 80-bit little-endian long double format"
# endif
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_X86_80_BIT_BIG_ENDIAN
# if LONG_DOUBLESIZE == 10
# define NV_NAN_PAYLOAD_MASK \
0x00, 0x00, 0x1f, 0xff, 0xff, 0xff, 0xff, 0xff, \
0xff, 0xff
# define NV_NAN_PAYLOAD_PERM \
NV_NAN_PAYLOAD_PERM_7_TO_0, 0xFF, 0xFF
# elif LONG_DOUBLESIZE == 12
# define NV_NAN_PAYLOAD_MASK \
0x00, 0x00, 0x1f, 0xff, 0xff, 0xff, 0xff, 0xff, \
0xff, 0xff, 0x00, 0x00
# define NV_NAN_PAYLOAD_PERM \
NV_NAN_PAYLOAD_PERM_7_TO_0, 0xFF, 0xFF, 0xFF, 0xFF
# elif LONG_DOUBLESIZE == 16
# define NV_NAN_PAYLOAD_MASK \
0x00, 0x00, 0x1f, 0xff, 0xff, 0xff, 0xff, 0xff, \
0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
# define NV_NAN_PAYLOAD_PERM \
NV_NAN_PAYLOAD_PERM_7_TO_0, \
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
# else
# error "Unexpected x86 80-bit big-endian long double format"
# endif
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_LE
/* For double-double we assume only the first double (in LE or BE terms)
* is used for NaN. */
# define NV_NAN_PAYLOAD_MASK \
NV_NAN_PAYLOAD_MASK_SKIP_EIGHT, NV_NAN_PAYLOAD_MASK_IEEE_754_64_LE
# define NV_NAN_PAYLOAD_PERM \
NV_NAN_PAYLOAD_PERM_SKIP_EIGHT, NV_NAN_PAYLOAD_PERM_IEEE_754_64_LE
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_BE
# define NV_NAN_PAYLOAD_MASK \
NV_NAN_PAYLOAD_MASK_IEEE_754_64_BE
# define NV_NAN_PAYLOAD_PERM \
NV_NAN_PAYLOAD_PERM_IEEE_754_64_BE
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_BE
# define NV_NAN_PAYLOAD_MASK \
NV_NAN_PAYLOAD_MASK_IEEE_754_64_LE
# define NV_NAN_PAYLOAD_PERM \
NV_NAN_PAYLOAD_PERM_IEEE_754_64_LE
# elif LONG_DOUBLEKIND == LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_LE
# define NV_NAN_PAYLOAD_MASK \
NV_NAN_PAYLOAD_MASK_SKIP_EIGHT, NV_NAN_PAYLOAD_MASK_IEEE_754_64_BE
# define NV_NAN_PAYLOAD_PERM \
NV_NAN_PAYLOAD_PERM_SKIP_EIGHT, NV_NAN_PAYLOAD_PERM_IEEE_754_64_BE
# else
# error "Unexpected long double format"
# endif
#else
# ifdef USE_QUADMATH /* quadmath is not long double */
# ifdef NV_LITTLE_ENDIAN
# define NV_NAN_PAYLOAD_MASK NV_NAN_PAYLOAD_MASK_IEEE_754_128_LE
# define NV_NAN_PAYLOAD_PERM NV_NAN_PAYLOAD_PERM_IEEE_754_128_LE
# elif defined(NV_BIG_ENDIAN)
# define NV_NAN_PAYLOAD_MASK NV_NAN_PAYLOAD_MASK_IEEE_754_128_BE
# define NV_NAN_PAYLOAD_PERM NV_NAN_PAYLOAD_PERM_IEEE_754_128_BE
# else
# error "Unexpected quadmath format"
# endif
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_32_BIT_LITTLE_ENDIAN
# define NV_NAN_PAYLOAD_MASK 0xff, 0xff, 0x07, 0x00
# define NV_NAN_PAYLOAD_PERM 0x0, 0x1, 0x2, 0xFF
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_32_BIT_BIG_ENDIAN
# define NV_NAN_PAYLOAD_MASK 0x00, 0x07, 0xff, 0xff
# define NV_NAN_PAYLOAD_PERM 0xFF, 0x2, 0x1, 0x0
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_64_BIT_LITTLE_ENDIAN
# define NV_NAN_PAYLOAD_MASK NV_NAN_PAYLOAD_MASK_IEEE_754_64_LE
# define NV_NAN_PAYLOAD_PERM NV_NAN_PAYLOAD_PERM_IEEE_754_64_LE
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_64_BIT_BIG_ENDIAN
# define NV_NAN_PAYLOAD_MASK NV_NAN_PAYLOAD_MASK_IEEE_754_64_BE
# define NV_NAN_PAYLOAD_PERM NV_NAN_PAYLOAD_PERM_IEEE_754_64_BE
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_128_BIT_LITTLE_ENDIAN
# define NV_NAN_PAYLOAD_MASK NV_NAN_PAYLOAD_MASK_IEEE_754_128_LE
# define NV_NAN_PAYLOAD_PERM NV_NAN_PAYLOAD_PERM_IEEE_754_128_LE
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN
# define NV_NAN_PAYLOAD_MASK NV_NAN_PAYLOAD_MASK_IEEE_754_128_BE
# define NV_NAN_PAYLOAD_PERM NV_NAN_PAYLOAD_PERM_IEEE_754_128_BE
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_64_BIT_MIXED_ENDIAN_LE_BE
# define NV_NAN_PAYLOAD_MASK 0xff, 0xff, 0x07, 0x00, 0xff, 0xff, 0xff, 0xff
# define NV_NAN_PAYLOAD_PERM 0x4, 0x5, 0x6, 0xFF, 0x0, 0x1, 0x2, 0x3
# elif DOUBLEKIND == DOUBLE_IS_IEEE_754_64_BIT_MIXED_ENDIAN_BE_LE
# define NV_NAN_PAYLOAD_MASK 0xff, 0xff, 0xff, 0xff, 0x00, 0x07, 0xff, 0xff
# define NV_NAN_PAYLOAD_PERM 0x3, 0x2, 0x1, 0x0, 0xFF, 0x6, 0x5, 0x4
# else
# error "Unexpected double format"
# endif
#endif
#endif /* DOUBLE_HAS_NAN */
/*
(KEEP THIS LAST IN perl.h!)
Mention
NV_PRESERVES_UV
HAS_MKSTEMP
HAS_MKSTEMPS
HAS_MKDTEMP
HAS_GETCWD
HAS_MMAP
HAS_MPROTECT
HAS_MSYNC
HAS_MADVISE
HAS_MUNMAP
I_SYSMMAN
Mmap_t
NVef
NVff
NVgf
HAS_UALARM
HAS_USLEEP
HAS_SETITIMER
HAS_GETITIMER
HAS_SENDMSG
HAS_RECVMSG
HAS_READV
HAS_WRITEV
I_SYSUIO
HAS_STRUCT_MSGHDR
HAS_STRUCT_CMSGHDR
HAS_NL_LANGINFO
HAS_DIRFD
so that Configure picks them up.
(KEEP THIS LAST IN perl.h!)
*/
#endif /* Include guard */
/*
* ex: set ts=8 sts=4 sw=4 et:
*/