AlkantarClanX12
Your IP : 18.119.19.205
"""Interface to the liblzma compression library.
This module provides a class for reading and writing compressed files,
classes for incremental (de)compression, and convenience functions for
one-shot (de)compression.
These classes and functions support both the XZ and legacy LZMA
container formats, as well as raw compressed data streams.
"""
__all__ = [
"CHECK_NONE", "CHECK_CRC32", "CHECK_CRC64", "CHECK_SHA256",
"CHECK_ID_MAX", "CHECK_UNKNOWN",
"FILTER_LZMA1", "FILTER_LZMA2", "FILTER_DELTA", "FILTER_X86", "FILTER_IA64",
"FILTER_ARM", "FILTER_ARMTHUMB", "FILTER_POWERPC", "FILTER_SPARC",
"FORMAT_AUTO", "FORMAT_XZ", "FORMAT_ALONE", "FORMAT_RAW",
"MF_HC3", "MF_HC4", "MF_BT2", "MF_BT3", "MF_BT4",
"MODE_FAST", "MODE_NORMAL", "PRESET_DEFAULT", "PRESET_EXTREME",
"LZMACompressor", "LZMADecompressor", "LZMAFile", "LZMAError",
"open", "compress", "decompress", "is_check_supported",
]
import builtins
import io
from _lzma import *
from _lzma import _encode_filter_properties, _decode_filter_properties
_MODE_CLOSED = 0
_MODE_READ = 1
_MODE_READ_EOF = 2
_MODE_WRITE = 3
_BUFFER_SIZE = 8192
class LZMAFile(io.BufferedIOBase):
"""A file object providing transparent LZMA (de)compression.
An LZMAFile can act as a wrapper for an existing file object, or
refer directly to a named file on disk.
Note that LZMAFile provides a *binary* file interface - data read
is returned as bytes, and data to be written must be given as bytes.
"""
def __init__(self, filename=None, mode="r", *,
format=None, check=-1, preset=None, filters=None):
"""Open an LZMA-compressed file in binary mode.
filename can be either an actual file name (given as a str or
bytes object), in which case the named file is opened, or it can
be an existing file object to read from or write to.
mode can be "r" for reading (default), "w" for (over)writing, or
"a" for appending. These can equivalently be given as "rb", "wb",
and "ab" respectively.
format specifies the container format to use for the file.
If mode is "r", this defaults to FORMAT_AUTO. Otherwise, the
default is FORMAT_XZ.
check specifies the integrity check to use. This argument can
only be used when opening a file for writing. For FORMAT_XZ,
the default is CHECK_CRC64. FORMAT_ALONE and FORMAT_RAW do not
support integrity checks - for these formats, check must be
omitted, or be CHECK_NONE.
When opening a file for reading, the *preset* argument is not
meaningful, and should be omitted. The *filters* argument should
also be omitted, except when format is FORMAT_RAW (in which case
it is required).
When opening a file for writing, the settings used by the
compressor can be specified either as a preset compression
level (with the *preset* argument), or in detail as a custom
filter chain (with the *filters* argument). For FORMAT_XZ and
FORMAT_ALONE, the default is to use the PRESET_DEFAULT preset
level. For FORMAT_RAW, the caller must always specify a filter
chain; the raw compressor does not support preset compression
levels.
preset (if provided) should be an integer in the range 0-9,
optionally OR-ed with the constant PRESET_EXTREME.
filters (if provided) should be a sequence of dicts. Each dict
should have an entry for "id" indicating ID of the filter, plus
additional entries for options to the filter.
"""
self._fp = None
self._closefp = False
self._mode = _MODE_CLOSED
self._pos = 0
self._size = -1
if mode in ("r", "rb"):
if check != -1:
raise ValueError("Cannot specify an integrity check "
"when opening a file for reading")
if preset is not None:
raise ValueError("Cannot specify a preset compression "
"level when opening a file for reading")
if format is None:
format = FORMAT_AUTO
mode_code = _MODE_READ
# Save the args to pass to the LZMADecompressor initializer.
# If the file contains multiple compressed streams, each
# stream will need a separate decompressor object.
self._init_args = {"format":format, "filters":filters}
self._decompressor = LZMADecompressor(**self._init_args)
self._buffer = None
elif mode in ("w", "wb", "a", "ab"):
if format is None:
format = FORMAT_XZ
mode_code = _MODE_WRITE
self._compressor = LZMACompressor(format=format, check=check,
preset=preset, filters=filters)
else:
raise ValueError("Invalid mode: {!r}".format(mode))
if isinstance(filename, (str, bytes)):
if "b" not in mode:
mode += "b"
self._fp = builtins.open(filename, mode)
self._closefp = True
self._mode = mode_code
elif hasattr(filename, "read") or hasattr(filename, "write"):
self._fp = filename
self._mode = mode_code
else:
raise TypeError("filename must be a str or bytes object, or a file")
def close(self):
"""Flush and close the file.
May be called more than once without error. Once the file is
closed, any other operation on it will raise a ValueError.
"""
if self._mode == _MODE_CLOSED:
return
try:
if self._mode in (_MODE_READ, _MODE_READ_EOF):
self._decompressor = None
self._buffer = None
elif self._mode == _MODE_WRITE:
self._fp.write(self._compressor.flush())
self._compressor = None
finally:
try:
if self._closefp:
self._fp.close()
finally:
self._fp = None
self._closefp = False
self._mode = _MODE_CLOSED
@property
def closed(self):
"""True if this file is closed."""
return self._mode == _MODE_CLOSED
def fileno(self):
"""Return the file descriptor for the underlying file."""
self._check_not_closed()
return self._fp.fileno()
def seekable(self):
"""Return whether the file supports seeking."""
return self.readable() and self._fp.seekable()
def readable(self):
"""Return whether the file was opened for reading."""
self._check_not_closed()
return self._mode in (_MODE_READ, _MODE_READ_EOF)
def writable(self):
"""Return whether the file was opened for writing."""
self._check_not_closed()
return self._mode == _MODE_WRITE
# Mode-checking helper functions.
def _check_not_closed(self):
if self.closed:
raise ValueError("I/O operation on closed file")
def _check_can_read(self):
if not self.readable():
raise io.UnsupportedOperation("File not open for reading")
def _check_can_write(self):
if not self.writable():
raise io.UnsupportedOperation("File not open for writing")
def _check_can_seek(self):
if not self.readable():
raise io.UnsupportedOperation("Seeking is only supported "
"on files open for reading")
if not self._fp.seekable():
raise io.UnsupportedOperation("The underlying file object "
"does not support seeking")
# Fill the readahead buffer if it is empty. Returns False on EOF.
def _fill_buffer(self):
# Depending on the input data, our call to the decompressor may not
# return any data. In this case, try again after reading another block.
while True:
if self._buffer:
return True
if self._decompressor.unused_data:
rawblock = self._decompressor.unused_data
else:
rawblock = self._fp.read(_BUFFER_SIZE)
if not rawblock:
if self._decompressor.eof:
self._mode = _MODE_READ_EOF
self._size = self._pos
return False
else:
raise EOFError("Compressed file ended before the "
"end-of-stream marker was reached")
if self._decompressor.eof:
# Continue to next stream.
self._decompressor = LZMADecompressor(**self._init_args)
try:
self._buffer = self._decompressor.decompress(rawblock)
except LZMAError:
# Trailing data isn't a valid compressed stream; ignore it.
self._mode = _MODE_READ_EOF
self._size = self._pos
return False
else:
self._buffer = self._decompressor.decompress(rawblock)
# Read data until EOF.
# If return_data is false, consume the data without returning it.
def _read_all(self, return_data=True):
blocks = []
while self._fill_buffer():
if return_data:
blocks.append(self._buffer)
self._pos += len(self._buffer)
self._buffer = None
if return_data:
return b"".join(blocks)
# Read a block of up to n bytes.
# If return_data is false, consume the data without returning it.
def _read_block(self, n, return_data=True):
blocks = []
while n > 0 and self._fill_buffer():
if n < len(self._buffer):
data = self._buffer[:n]
self._buffer = self._buffer[n:]
else:
data = self._buffer
self._buffer = None
if return_data:
blocks.append(data)
self._pos += len(data)
n -= len(data)
if return_data:
return b"".join(blocks)
def peek(self, size=-1):
"""Return buffered data without advancing the file position.
Always returns at least one byte of data, unless at EOF.
The exact number of bytes returned is unspecified.
"""
self._check_can_read()
if self._mode == _MODE_READ_EOF or not self._fill_buffer():
return b""
return self._buffer
def read(self, size=-1):
"""Read up to size uncompressed bytes from the file.
If size is negative or omitted, read until EOF is reached.
Returns b"" if the file is already at EOF.
"""
self._check_can_read()
if self._mode == _MODE_READ_EOF or size == 0:
return b""
elif size < 0:
return self._read_all()
else:
return self._read_block(size)
def read1(self, size=-1):
"""Read up to size uncompressed bytes, while trying to avoid
making multiple reads from the underlying stream.
Returns b"" if the file is at EOF.
"""
# Usually, read1() calls _fp.read() at most once. However, sometimes
# this does not give enough data for the decompressor to make progress.
# In this case we make multiple reads, to avoid returning b"".
self._check_can_read()
if (size == 0 or self._mode == _MODE_READ_EOF or
not self._fill_buffer()):
return b""
if 0 < size < len(self._buffer):
data = self._buffer[:size]
self._buffer = self._buffer[size:]
else:
data = self._buffer
self._buffer = None
self._pos += len(data)
return data
def write(self, data):
"""Write a bytes object to the file.
Returns the number of uncompressed bytes written, which is
always len(data). Note that due to buffering, the file on disk
may not reflect the data written until close() is called.
"""
self._check_can_write()
compressed = self._compressor.compress(data)
self._fp.write(compressed)
self._pos += len(data)
return len(data)
# Rewind the file to the beginning of the data stream.
def _rewind(self):
self._fp.seek(0, 0)
self._mode = _MODE_READ
self._pos = 0
self._decompressor = LZMADecompressor(**self._init_args)
self._buffer = None
def seek(self, offset, whence=0):
"""Change the file position.
The new position is specified by offset, relative to the
position indicated by whence. Possible values for whence are:
0: start of stream (default): offset must not be negative
1: current stream position
2: end of stream; offset must not be positive
Returns the new file position.
Note that seeking is emulated, sp depending on the parameters,
this operation may be extremely slow.
"""
self._check_can_seek()
# Recalculate offset as an absolute file position.
if whence == 0:
pass
elif whence == 1:
offset = self._pos + offset
elif whence == 2:
# Seeking relative to EOF - we need to know the file's size.
if self._size < 0:
self._read_all(return_data=False)
offset = self._size + offset
else:
raise ValueError("Invalid value for whence: {}".format(whence))
# Make it so that offset is the number of bytes to skip forward.
if offset < self._pos:
self._rewind()
else:
offset -= self._pos
# Read and discard data until we reach the desired position.
if self._mode != _MODE_READ_EOF:
self._read_block(offset, return_data=False)
return self._pos
def tell(self):
"""Return the current file position."""
self._check_not_closed()
return self._pos
def open(filename, mode="rb", *,
format=None, check=-1, preset=None, filters=None,
encoding=None, errors=None, newline=None):
"""Open an LZMA-compressed file in binary or text mode.
filename can be either an actual file name (given as a str or bytes object),
in which case the named file is opened, or it can be an existing file object
to read from or write to.
The mode argument can be "r", "rb" (default), "w", "wb", "a", or "ab" for
binary mode, or "rt", "wt" or "at" for text mode.
The format, check, preset and filters arguments specify the compression
settings, as for LZMACompressor, LZMADecompressor and LZMAFile.
For binary mode, this function is equivalent to the LZMAFile constructor:
LZMAFile(filename, mode, ...). In this case, the encoding, errors and
newline arguments must not be provided.
For text mode, a LZMAFile object is created, and wrapped in an
io.TextIOWrapper instance with the specified encoding, error handling
behavior, and line ending(s).
"""
if "t" in mode:
if "b" in mode:
raise ValueError("Invalid mode: %r" % (mode,))
else:
if encoding is not None:
raise ValueError("Argument 'encoding' not supported in binary mode")
if errors is not None:
raise ValueError("Argument 'errors' not supported in binary mode")
if newline is not None:
raise ValueError("Argument 'newline' not supported in binary mode")
lz_mode = mode.replace("t", "")
binary_file = LZMAFile(filename, lz_mode, format=format, check=check,
preset=preset, filters=filters)
if "t" in mode:
return io.TextIOWrapper(binary_file, encoding, errors, newline)
else:
return binary_file
def compress(data, format=FORMAT_XZ, check=-1, preset=None, filters=None):
"""Compress a block of data.
Refer to LZMACompressor's docstring for a description of the
optional arguments *format*, *check*, *preset* and *filters*.
For incremental compression, use an LZMACompressor object instead.
"""
comp = LZMACompressor(format, check, preset, filters)
return comp.compress(data) + comp.flush()
def decompress(data, format=FORMAT_AUTO, memlimit=None, filters=None):
"""Decompress a block of data.
Refer to LZMADecompressor's docstring for a description of the
optional arguments *format*, *check* and *filters*.
For incremental decompression, use a LZMADecompressor object instead.
"""
results = []
while True:
decomp = LZMADecompressor(format, memlimit, filters)
try:
res = decomp.decompress(data)
except LZMAError:
if results:
break # Leftover data is not a valid LZMA/XZ stream; ignore it.
else:
raise # Error on the first iteration; bail out.
results.append(res)
if not decomp.eof:
raise LZMAError("Compressed data ended before the "
"end-of-stream marker was reached")
data = decomp.unused_data
if not data:
break
return b"".join(results)